- Author / Uploaded
- Anders Vretblad

*820*
*151*
*5MB*

*Pages 282*
*Page size 336 x 522.24 pts*
*Year 2006*

Graduate Texts in Mathematics

223

Editorial Board S. Axler F.W. Gehring K.A. Ribet

This page intentionally left blank

Anders Vretblad

Fourier Analysis and Its Applications

Anders Vretblad Department of Mathematics Uppsala University Box 480 SE-751 06 Uppsala Sweden [email protected] Editorial Board: S. Axler Mathematics Department San Francisco State University San Francisco, CA 94132 USA [email protected]

F.W. Gehring Mathematics Department East Hall University of Michigan Ann Arbor, MI 48109 USA [email protected]

K.A. Ribet Mathematics Department University of California, Berkeley Berkeley, CA 94720-3840 USA [email protected]

Mathematics Subject Classification (2000): 42-01 Library of Congress Cataloging-in-Publication Data Vretblad, Anders. Fourier analysis and its applications / Anders Vretblad. p. cm. Includes bibliographical references and index. ISBN 0-387-00836-5 (hc. : alk. paper) 1. Fourier analysis. I. Title. QA403.5. V74 2003 515′2433—dc21 2003044941 ISBN 0-387-00836-5

Printed on acid-free paper.

2003 Springer-Verlag New York, Inc. All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Springer-Verlag New York, Inc., 175 Fifth Avenue, New York, NY 10010, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use in this publication of trade names, trademarks, service marks, and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights. Printed in the United States of America. 9 8 7 6 5 4 3 2 1

SPIN 10920442

www.springer-ny.com Springer-Verlag New York Berlin Heidelberg A member of BertelsmannSpringer Science+Business Media GmbH

To

Yngve Domar, my teacher, mentor, and friend

This page intentionally left blank

Preface

The classical theory of Fourier series and integrals, as well as Laplace transforms, is of great importance for physical and technical applications, and its mathematical beauty makes it an interesting study for pure mathematicians as well. I have taught courses on these subjects for decades to civil engineering students, and also mathematics majors, and the present volume can be regarded as my collected experiences from this work. There is, of course, an unsurpassable book on Fourier analysis, the treatise by Katznelson from 1970. That book is, however, aimed at mathematically very mature students and can hardly be used in engineering courses. On the other end of the scale, there are a number of more-or-less cookbookstyled books, where the emphasis is almost entirely on applications. I have felt the need for an alternative in between these extremes: a text for the ambitious and interested student, who on the other hand does not aspire to become an expert in the ﬁeld. There do exist a few texts that fulﬁll these requirements (see the literature list at the end of the book), but they do not include all the topics I like to cover in my courses, such as Laplace transforms and the simplest facts about distributions. The reader is assumed to have studied real calculus and linear algebra and to be familiar with complex numbers and uniform convergence. On the other hand, we do not require the Lebesgue integral. Of course, this somewhat restricts the scope of some of the results proved in the text, but the reader who does master Lebesgue integrals can probably extrapolate the theorems. Our ambition has been to prove as much as possible within these restrictions.

viii

Some knowledge of the simplest distributions, such as point masses and dipoles, is essential for applications. I have chosen to approach this matter in two separate ways: ﬁrst, in an intuitive way that may be suﬃcient for engineering students, in star-marked sections of Chapter 2 and subsequent chapters; secondly, in a more strict way, in Chapter 8, where at least the fundaments are given in a mathematically correct way. Only the one-dimensional case is treated. This is not intended to be more than the merest introduction, to whet the reader’s appetite. Acknowledgements. In my work I have, of course, been inspired by existing literature. In particular, I want to mention a book by Arne Broman, Introduction to Partial Diﬀerential Equations... (Addison–Wesley, 1970), a compendium by Jan Petersson of the Chalmers Institute of Technology in Gothenburg, and also a compendium from the Royal Institute of Technology in Stockholm, by Jockum Aniansson, Michael Benedicks, and Karim Daho. I am grateful to my colleagues and friends in Uppsala. First of all Professor Yngve Domar, who has been my teacher and mentor, and who introduced me to the ﬁeld. The book is dedicated to him. I am also particularly indebted to Gunnar Berg, Christer O. Kiselman, Anders K¨ allstr¨om, Lars-˚ Ake Lindahl, and Lennart Salling. Bengt Carlsson has helped with ideas for the applications to control theory. The problems have been worked and re-worked by Jonas Bjermo and Daniel Domert. If any incorrect answers still remain, the blame is mine. Finally, special thanks go to three former students at Uppsala University, Mikael Nilsson, Matthias Palm´er, and Magnus Sandberg. They used an early version of the text and presented me with very constructive criticism. This actually prompted me to pursue my work on the text, and to translate it into English. Uppsala, Sweden January 2003

Anders Vretblad

Contents

Preface

vii

1 Introduction 1.1 The classical partial diﬀerential equations 1.2 Well-posed problems . . . . . . . . . . . . 1.3 The one-dimensional wave equation . . . . 1.4 Fourier’s method . . . . . . . . . . . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

1 1 3 5 9

2 Preparations 2.1 Complex exponentials . . . . . . . . . . . . 2.2 Complex-valued functions of a real variable 2.3 Ces` aro summation of series . . . . . . . . . 2.4 Positive summation kernels . . . . . . . . . 2.5 The Riemann–Lebesgue lemma . . . . . . . 2.6 *Some simple distributions . . . . . . . . . 2.7 *Computing with δ . . . . . . . . . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

15 15 17 20 22 25 27 32

3 Laplace and Z transforms 3.1 The Laplace transform . . . . . . . . 3.2 Operations . . . . . . . . . . . . . . 3.3 Applications to diﬀerential equations 3.4 Convolution . . . . . . . . . . . . . . 3.5 *Laplace transforms of distributions 3.6 The Z transform . . . . . . . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

39 39 42 47 53 57 60

. . . . . .

. . . . . .

. . . . . .

. . . . . .

x

Contents

3.7 Applications in control theory . . . . . . . . . . . . . . . . . Summary of Chapter 3 . . . . . . . . . . . . . . . . . . . . . . . .

67 70

4 Fourier series 4.1 Deﬁnitions . . . . . . . . . . . . . . . . . . 4.2 Dirichlet’s and Fej´er’s kernels; uniqueness 4.3 Diﬀerentiable functions . . . . . . . . . . . 4.4 Pointwise convergence . . . . . . . . . . . 4.5 Formulae for other periods . . . . . . . . . 4.6 Some worked examples . . . . . . . . . . . 4.7 The Gibbs phenomenon . . . . . . . . . . 4.8 *Fourier series for distributions . . . . . . Summary of Chapter 4 . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

73 . 73 . 80 . 84 . 86 . 90 . 91 . 93 . 96 . 100

5 L2 Theory 5.1 Linear spaces over the complex numbers 5.2 Orthogonal projections . . . . . . . . . . 5.3 Some examples . . . . . . . . . . . . . . 5.4 The Fourier system is complete . . . . . 5.5 Legendre polynomials . . . . . . . . . . 5.6 Other classical orthogonal polynomials . Summary of Chapter 5 . . . . . . . . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

105 105 110 114 119 123 127 130

6 Separation of variables 6.1 The solution of Fourier’s problem . . . . 6.2 Variations on Fourier’s theme . . . . . . 6.3 The Dirichlet problem in the unit disk . 6.4 Sturm–Liouville problems . . . . . . . . 6.5 Some singular Sturm–Liouville problems Summary of Chapter 6 . . . . . . . . . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

137 137 139 148 153 159 160

7 Fourier transforms 7.1 Introduction . . . . . . . . . . . . . . . . 7.2 Deﬁnition of the Fourier transform . . . 7.3 Properties . . . . . . . . . . . . . . . . . 7.4 The inversion theorem . . . . . . . . . . 7.5 The convolution theorem . . . . . . . . . 7.6 Plancherel’s formula . . . . . . . . . . . 7.7 Application 1 . . . . . . . . . . . . . . . 7.8 Application 2 . . . . . . . . . . . . . . . 7.9 Application 3: The sampling theorem . . 7.10 *Connection with the Laplace transform 7.11 *Distributions and Fourier transforms . Summary of Chapter 7 . . . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

165 165 166 168 171 176 180 182 185 187 188 190 192

Contents

xi

8 Distributions 8.1 History . . . . . . . . . . . . . . . . . . 8.2 Fuzzy points – test functions . . . . . . 8.3 Distributions . . . . . . . . . . . . . . . 8.4 Properties . . . . . . . . . . . . . . . . . 8.5 Fourier transformation . . . . . . . . . . 8.6 Convolution . . . . . . . . . . . . . . . . 8.7 Periodic distributions and Fourier series 8.8 Fundamental solutions . . . . . . . . . . 8.9 Back to the starting point . . . . . . . . Summary of Chapter 8 . . . . . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

197 197 200 203 206 213 218 220 221 223 224

9 Multi-dimensional Fourier analysis 9.1 Rearranging series . . . . . . . . . . . 9.2 Double series . . . . . . . . . . . . . . 9.3 Multi-dimensional Fourier series . . . . 9.4 Multi-dimensional Fourier transforms .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

227 227 230 233 236

. . . .

Appendices A The ubiquitous convolution

239

B The discrete Fourier transform

243

C Formulae C.1 Laplace transforms . . . C.2 Z transforms . . . . . . C.3 Fourier series . . . . . . C.4 Fourier transforms . . . C.5 Orthogonal polynomials

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

247 247 250 251 252 254

D Answers to selected exercises

257

E Literature

265

Index

267

This page intentionally left blank

1 Introduction

1.1 The classical partial diﬀerential equations In this introductory chapter, we give a brief survey of three main types of partial diﬀerential equations that occur in classical physics. We begin by establishing some convenient notation. Let Ω be a domain (an open and connected set) in three-dimensional space R3 , and let T be an open interval on the time axis. By C k (Ω), resp. C k (Ω × T ), we mean the set of all real-valued functions u(x, y, z), resp. u(x, y, z, t), with all their partial derivatives of order up to and including k deﬁned and continuous in the respective regions. It is often practical to collect the three spatial coordinates (x, y, z) in a vector x and describe the functions as u(x), resp. u(x, t). By ∆ we mean the Laplace operator ∆ = ∇2 :=

∂2 ∂2 ∂2 + 2+ 2. 2 ∂x ∂y ∂z

Partial derivatives will mostly be indicated by subscripts, e.g., ut =

∂u , ∂t

uyx =

∂2u . ∂x∂y

The ﬁrst equation to be considered is called the heat equation or the diﬀusion equation: ∆u =

1 ∂u , a2 ∂t

(x, t) ∈ Ω × T.

2

1. Introduction

As the name indicates, this equation describes conduction of heat in a homogeneous medium. The temperature at the point x at time t is given by u(x, t), and a is a constant that depends on the conducting properties of the medium. The equation can also be used to describe various processes of diﬀusion, e.g., the diﬀusion of a dissolved substance in the solvent liquid, neutrons in a nuclear reactor, Brownian motion, etc. The equation represents a category of second-order partial diﬀerential equations that is traditionally categorized as parabolic. Characteristically, these equations describe non-reversible processes, and their solutions are highly regular functions (of class C ∞ ). In this book, we shall solve some special problems for the heat equation. We shall be dealing with situations where the spatial variable can be regarded as one-dimensional: heat conduction in a homogeneous rod, completely isolated from the exterior (except possibly at the ends of the rod). In this case, the equation reduces to uxx =

1 ut . a2

The wave equation has the form ∆u =

1 ∂2u , c2 ∂t2

(x, t) ∈ Ω × T.

where c is a constant. This equation describes vibrations in a homogeneous medium. The value u(x, t) is interpreted as the deviation at time t from the position at rest of the point with rest position given by x. The equation is a case of hyperbolic equations. Equations of this category typically describe reversible processes (the past can be deduced from the present and future by “reversion of time”). Sometimes it is even suitable to allow solutions for which the partial derivatives involved in the equation do not exist in the usual sense. (Think of shock waves such as the sonic bangs that occur when an aeroplane goes supersonic.) We shall be studying the one-dimensional wave equation later on in the book. This case can, for instance, describe the motion of a vibrating string. Finally we consider an equation that does not involve time. It is called the Laplace equation and it looks simply like this: ∆u = 0. It occurs in a number of physical situations: as a special case of the heat equation, when one considers a stationary situation, a steady state, that does not depend on time (so that ut = 0); as an equation satisﬁed by the potential of a conservative force; and as an object of considerable purely mathematical interest. Together with the closely related Poisson equation, ∆u(x) = F (x), where F is a known function, it is typical of equations

1.2 Well-posed problems

3

classiﬁed as elliptic. The solutions of the Laplace equation are very regular functions: not only do they have derivatives of all orders, there are even certain possibilities to reconstruct the whole function from its local behaviour near a single point. (If the reader is familiar with analytic functions, this should come as no news in the two-dimensional case: then the solutions are harmonic functions that can be interpreted (locally) as real parts of analytic functions.) The names elliptic, parabolic, and hyperbolic are due to superﬁcial similarities in the appearance of the diﬀerential equations and the equations of conics in the plane. The precise deﬁnitions of the diﬀerent types are as follows: The unknown function is u = u(x) = u(x1 , x2 , . . . , xm ). The equations considered are linear; i.e., they can be written as a sum of terms equal to a known function (which can be identically zero), where each term in the sum consists of a coeﬃcient (constant or variable) times some derivative of u, or u itself. The derivatives are of degree at most 2. By changing variables (possibly locally around each point in the domain), one can then write the equation so that no mixed derivatives occur (this is analogous to the diagonalization of quadratic forms). It then reduces to the form a1 u11 + a2 u22 + · · · + am umm + {terms containing uj and u} = f (x), where uj = ∂u/∂xj etc. If all the aj have the same sign, the equation is elliptic; if at least one of them is zero, the equation is parabolic; and if there exist aj ’s of opposite signs, it is hyperbolic. An equation can belong to diﬀerent categories in diﬀerent parts of the domain, as, for example, the Tricomi equation uxx + xuyy = 0 (where u = u(x, y)), which is elliptic in the right-hand half-plane and hyperbolic in the left-hand half-plane. Another example occurs in the study of the so-called velocity potential u(x, y) for planar laminary ﬂuid ﬂow. Consider, for instance, an aeroplane wing in a streaming medium. In the case of ideal ﬂow one has ∆u = 0. Otherwise, when there is friction (air resistance), the equation looks something like (1−M 2 )uxx +uyy = 0, with M = v/v0 , where v is the speed of the ﬂowing medium and v0 is the velocity of sound in the medium. This equation is elliptic, with nice solutions, as long as v < v0 , while it is hyperbolic if v > v0 and then has solutions that represent shock waves (sonic bangs). Something quite complicated happens when the speed of sound is surpassed.

1.2 Well-posed problems A problem for a diﬀerential equation consists of the equation together with some further conditions such as initial or boundary conditions of some form. In order that a problem be “nice” to handle it is often desirable that it have certain properties:

4

1. Introduction

1. There exists a solution to the problem. 2. There exists only one solution (i.e., the solution is uniquely determined). 3. The solution is stable, i.e., small changes in the given data give rise to small changes in the appearance of the solution. A problem having these properties (the third condition must be made precise in some way or other) is traditionally said to be well posed. It is, however, far from true that all physically relevant problems are well posed. The third condition, in particular, has caught the attention of mathematicians in recent years, since it has become apparent that it is often very hard to satisfy it. The study of these matters is part of what is popularly labeled chaos research. To satisfy the reader’s curiosity, we shall give some examples to illuminate the concept of well-posedness. Example 1.1. It can be shown that for suitably chosen functions f ∈ C ∞ , the equation ux + uy + (x + 2iy)ut = f has no solution u = u(x, y, t) at all (in the class of complex-valued functions) (Hans Lewy, 1957). Thus, in this case, condition 1 fails. Example 1.2. A natural problem for the heat equation (in one spatial dimension) is this one: uxx (x, t) = ut (x, t), x > 0, t > 0;

u(x, 0) = 0, x > 0;

u(0, t) = 0, t > 0.

This is a mathematical model for the temperature in a semi-inﬁnite rod, represented by the positive x-axis, in the situation when at time 0 the rod is at temperature 0, and the end point x = 0 is kept at temperature 0 the whole time t > 0. The obvious and intuitive solution is, of course, that the rod will remain at temperature 0, i.e., u(x, t) = 0 for all x > 0, t > 0. But the mathematical problem has additional solutions: let u(x, t) =

x −x2 /(4t) e , t3/2

x > 0, t > 0.

It is a simple exercise in partial diﬀerentiation to show that this function satisﬁes the heat equation; it is obvious that u(0, t) = 0, and it is an easy exercise in limits to check that lim u(x, t) = 0. The function must be t0

considered a solution of the problem, as the formulation stands. Thus, the problem fails to have property 2. The disturbing solution has a rather peculiar feature: it could be said to represent a certain (ﬁnite) amount located at the end point of the √ of heat, rod at time 0. The value of u( 2t, t) is (2/e)/t, which tends to +∞ as t 0. One way of excluding it as a solution is adding some condition to the formulation of the problem; as an example it is actually suﬃcient to

1.3 The one-dimensional wave equation

5

demand that a solution must be bounded. (We do not prove here that this does solve the dilemma.) Example 1.3. A simple example of instability is exhibited by an ordinary diﬀerential equation such as y (t) + y(t) = f (t) with initial conditions y(0) = 1, y (0) = 0. If, for example, we take f (t) = 1, the solution is y(t) = 1. If we introduce a small perturbation in the right-hand member by taking f (t) = 1 + ε cos t, where ε = 0, the solution is given by y(t) = 1 + 12 εt sin t. As time goes by, this expression will oscillate with increasing amplitude and “explode”. The phenomenon is called resonance.

1.3 The one-dimensional wave equation We shall attempt to ﬁnd all solutions of class C 2 of the one-dimensional wave equation c2 uxx = utt . Initially, we consider solutions deﬁned in the open half-plane t > 0. Introduce new coordinates (ξ, η), deﬁned by ξ = x − ct,

η = x + ct.

It is an easy exercise in applying the chain rule to show that ∂2u ∂2u ∂2u ∂2u + = + 2 ∂x2 ∂ξ 2 ∂ξ ∂η ∂η 2 ∂2u ∂2u ∂2u ∂2u + . utt = 2 = c2 − 2 ∂t ∂ξ 2 ∂ξ ∂η ∂η 2

uxx =

Inserting these expressions in the equation and simplifying we obtain ∂2u ∂ ∂u c2 · 4 = 0. =0 ⇐⇒ ∂ξ ∂η ∂ξ ∂η Now we can integrate step by step. First we see that ∂u/∂η must be a function of only η, say, ∂u/∂η = h(η). If ψ is an antiderivative of h, another integration yields u = ϕ(ξ) + ψ(η), where ϕ is a new arbitrary function. Returning to the original variables (x, t), we have found that u(x, t) = ϕ(x − ct) + ψ(x + ct).

(1.1)

In this expression, ϕ and ψ are more-or-less arbitrary functions of one variable. If the solution u really is supposed to be of class C 2 , we must demand that ϕ and ψ have continuous second derivatives. It is illuminating to take a closer look at the signiﬁcance of the two terms in the solution. First, assume that ψ(s) = 0 for all s, so that u(x, t) =

6

1. Introduction u t

u(x,1) t=1

c u(x,0) x

t=0

FIGURE 1.1. t

x − ct =const.

D

x

FIGURE 1.2.

ϕ(x − ct). For t = 0, the graph of the function x → u(x, 0) looks just like the graph of ϕ itself. At a later moment, the graph of x → u(x, t) will have the same shape as that of ϕ, but it is pushed ct units of length to the right. Thus, the term ϕ(x − ct) represents a wave moving to the right along the x-axis with constant speed equal to c. See Figure 1.1! In an analogous manner, the term ψ(x + ct) describes a wave moving to the left with the same speed. The general solution of the one-dimensional wave equation thus consists of a superposition of two waves, moving along the x-axis in opposite directions. The lines x ± ct = constant, passing through the half-plane t > 0, constitute a net of level curves for the two terms in the solution. These lines are called the characteristic curves or simply characteristics of the equation. If, instead of the half-plane, we study solutions in some other region D, the derivation of the general solution works in the same way as above, as long as the characteristics run unbroken through D. In a region such as that shown in Figure 1.2, the function ϕ need not take on the same value on the two indicated sections that do lie on the same line but are not connected inside D. In such a case, the general solution must be described in a more complicated way. But if the region is convex, the formula (1.1) gives the general solution.

1.3 The one-dimensional wave equation

7

Remark. In a way, the general behavior of the solution is similar also in higher spatial dimensions. For example, the two-dimensional wave equation ∂2u ∂2u 1 ∂2u + = 2 2 2 ∂x ∂y c ∂t2 has solutions that represent wave-shapes passing the plane in all directions, and the general solution can be seen as a sort of superposition of such solutions. But here the directions are inﬁnite in number, and there are both planar and circular wave-fronts to consider. The superposition cannot be realized as a sum — one has to use integrals. It is, however, usually of little interest to exhibit the general solution of the equation. It is much more valuable to be able to pick out some particular solution that is of importance for a concrete situation.

Let us now solve a natural initial value problem for the wave equation in one spatial dimension. Let f (x) and g(x) be given functions on R. We want to ﬁnd all functions u(x, t) that satisfy 2 c uxx = utt , −∞ < x < ∞, t > 0; (P) u(x, 0) = f (x), ut (x, 0) = g(x), −∞ < x < ∞. (The initial conditions assert that we know the shape of the solution at t = 0, and also its rate of change at the same time.) By our previous calculations, we know that the solution must have the form (1.1), and so our task is to determine the functions ϕ and ψ so that g(x) = ut (x, 0) = −c ϕ (x)+c ψ (x). (1.2) x An antiderivative of g is given by G(x) = 0 g(y) dy, and the second formula can then be integrated to f (x) = u(x, 0) = ϕ(x)+ψ(x),

−ϕ(x) + ψ(x) =

1 G(x) + K, c

where K is the integration constant. Combining this with the ﬁrst formula of (1.2), we can solve for ϕ and ψ: 1 1 1 1 ϕ(x) = f (x) − G(x) − K , f (x) + G(x) + K . ψ(x) = 2 c 2 c Substitution now gives u(x, t) = ϕ(x − ct) + ψ(x + ct) 1 1 1 f (x − ct) − G(x − ct) − K + f (x + ct) + G(x + ct) + K = 2 c c f (x − ct) + f (x + ct) G(x + ct) − G(x − ct) + 2 2c x+ct 1 f (x − ct) + f (x + ct) + g(y) dy. = 2 2c =

x−ct

(1.3)

8

1. Introduction

(x0 ,t0 )

x − ct = const.

x0 −ct0

x + ct = const.

x0

x0 +ct0

x

FIGURE 1.3.

The ﬁnal result is called d’Alembert’s formula. It is something as rare as an explicit (and unique) solution of a problem for a partial diﬀerential equation. Remark. If we want to compute the value of the solution u(x, t) at a particular point (x0 , t0 ), d’Alembert’s formula tells us that it is suﬃcient to know the initial values on the interval [x0 − ct0 , x0 + ct0 ]: this is again a manifestation of the fact that the “waves” propagate with speed c. Conversely, the initial values taken on [x0 − ct0 , x0 + ct0 ] are suﬃcient to determine the solution in the isosceles triangle with base equal to this interval and having its other sides along characteristics. See Figure 1.3.

In a similar way one can solve suitably formulated problems in other regions. We give an example for a semi-inﬁnite spatial interval. Example 1.4. Find all solutions u(x, t) of uxx = utt for x > 0, t > 0, that satisfy u(x, 0) = 2x and ut (x, 0) = 1 for x > 0 and, in addition, u(0, t) = 2t for t > 0. Solution. Since the ﬁrst quadrant of the xt-plane is convex, all solutions of the equation must have the appearance u(x, t) = ϕ(x − t) + ψ(x + t),

x > 0, t > 0.

Our task is to determine what the functions ϕ and ψ look like. We need information about ψ(s) when s is a positive number, and we must ﬁnd out what ϕ(s) is for all real s. If t = 0 we get 2x = u(x, 0) = ϕ(x) + ψ(x) and 1 = ut (x, 0) = −ϕ (x) + ψ (x); and for x = 0 we must have 2t = ϕ(−t) + ψ(t). To liberate ourselves from the magic of letters, we neutralize the name of the variable and call it s. The three conditions then look like this, collected together: 2s = ϕ(s) + ψ(s) 1 = −ϕ (s) + ψ (s) s > 0. 2s = ϕ(−s) + ψ(s)

1.4 Fourier’s method

9

The second condition can be integrated to −ϕ(s) + ψ(s) = s + C, and combining this with the ﬁrst condition we get ϕ(s) =

1 2

s−

1 2

C,

ψ(s) =

3 2

s+

1 2

C

for s > 0.

The third condition then yields ϕ(−s) = 2s − ψ(s) = where we switch the sign of s to get ϕ(s) = − 12 s −

1 2

C

Now we put the solution together: u(x, t) = ϕ(x − t) + ψ(x + t) =

1 2 (x − t) 1 2 (t − x)

1 2

s−

1 2

C,

s > 0,

for s < 0.

+ 32 (x + t) = 2x + t, x > t > 0,

+ 32 (x + t) = x + 2t, 0 < x < t.

Evidently, there is just one solution of the given problem. A closer look shows that this function is continuous along the line x = t, but it is in fact not diﬀerentiable there. It represents an “angular” wave. It seems a triﬂe fastidious to reject it as a solution of the wave equation, just because it is not of class C 2 . One way to solve this conﬂict is furnished by the theory of distributions, which generalizes the notion of functions in such a way that even “angular” functions are assigned a sort of derivative. Exercise 2

1.1 Find the solution of the problem (P), when f (x) = e−x , g(x) =

1 . 1 + x2

1.4 Fourier’s method We shall give a sketch of an idea that was tried by Jean-Baptiste Joseph Fourier in his famous treatise of 1822, Th´eorie analytique de la chaleur. It constitutes an attempt at solving a problem for the one-dimensional heat equation. If the physical units for heat conductivity, etc., are suitably chosen, this equation can be written as uxx = ut , where u = u(x, t) is the temperature at the point x on a thin rod at time t. We assume the rod to be isolated from its surroundings, so that no exchange of heat takes place, except possibly at the ends of the rod. Let us now assume the length of the rod to be π, so that it can be identiﬁed with the interval [0, π] of the x-axis. In the situation considered by Fourier, both ends of the rod are kept at temperature 0 from the moment when t = 0, and the temperature of the rod at the initial moment is assumed to

10

1. Introduction

be equal to a known function f (x). It is then physically reasonable that we should be able to ﬁnd the temperature u(x, t) at any point x and at any time t > 0. The problem can be summarized thus: 0 < x < π, t > 0; (E) uxx = ut , (B) u(0, t) = u(π, t) = 0, t > 0; (1.4) (I) u(x, 0) = f (x), 0 < x < π. The letters on the left stand for equation, boundary conditions, and initial condition, respectively. The conditions (E) and (B) share a speciﬁc property: if they are satisﬁed by two functions u and v, then all linear combinations αu + βv of them also satisfy the same conditions. This property is traditionally expressed by saying that the conditions (E) and (B) are homogeneous. Fourier’s idea was to try to ﬁnd solutions to the partial problem consisting of just these conditions, disregarding (I) for a while. It is evident that the function u(x, t) = 0 for all (x, t) is a solution of the homogeneous conditions. It is regarded as a trivial and uninteresting solution. Let us instead look for solutions that are not identically zero. Fourier chose, possibly for no other reason than the fact that it turned out to be fruitful, to look for solutions having the particular form u(x, t) = X(x) T (t), where the functions X(x) and T (t) depend each on just one of the variables. Substituting this expression for u into the equation (E), we get X (x) T (t) = X(x) T (t),

0 < x < π,

t > 0.

If we divide this by the product X(x) T (t) (consciously ignoring the risk that the denominator might be zero somewhere), we get T (t) X (x) = , X(x) T (t)

0 < x < π,

t > 0.

(1.5)

This equality has a peculiar property. If we change the value of the variable t, this does not aﬀect the left-hand member, which implies that the righthand member must also be unchanged. But this member is a function of only t; it must then be constant. Similarly, if x is changed, this does not aﬀect the right-hand member and thus not the left-hand member, either. Indeed, we get that both sides of the equality are constant for all the values of x and t that are being considered. This constant value we denote (by tradition) by −λ. This means that we can split the formula (1.5) into two formulae, each being an ordinary diﬀerential equation: X (x) + λX(x) = 0,

0 < x < π;

T (t) + λT (t) = 0,

t > 0.

One usually says that one has separated the variables, and the whole method is also called the method of separation of variables.

1.4 Fourier’s method

11

We shall also include the boundary condition (B). Inserting the expression u(x, t) = X(x) T (t), we get X(0) T (t) = X(π) T (t) = 0,

t > 0.

Now if, for example, X(0) = 0, this would force us to have T (t) = 0 for t > 0, which would give us the trivial solution u(x, t) ≡ 0. If we want to ﬁnd interesting solutions we must thus demand that X(0) = 0; for the same reason we must have X(π) = 0. This gives rise to the following boundary value problem for X: X (x) + λX(x) = 0,

0 < x < π;

X(0) = X(π) = 0.

(1.6)

In order to ﬁnd nontrivial solutions of this, we consider the diﬀerent possible cases, depending on the value of λ. λ < 0: Then we can write λ = −α2 , where we can just as well assume that α > 0. The general solution of the diﬀerential equation is then X(x) = Aeαx + Be−αx . The boundary conditions become 0 = X(0) = A + B, 0 = X(π) = Aeαπ + Be−απ . This can be seen as a homogeneous linear system of equations with A and B as unknowns and determinant e−απ − eαπ = −2 sinh απ = 0. It has thus a unique solution A = B = 0, but this leads to an uninteresting function X. λ = 0: In this case the diﬀerential equation reduces to X (x) = 0 with solutions X(x) = Ax + B, and the boundary conditions imply, as in the previous case, that A = B = 0, and we ﬁnd no interesting solution. λ > 0: Now let λ = ω 2 , where we can assume that ω > 0. The general solution is given by X(x) = A cos ωx + B sin ωx. The ﬁrst boundary condition gives 0 = X(0) = A, which leaves us with X(x) = B sin ωx. The second boundary condition then gives 0 = X(π) = B sin ωπ.

(1.7)

If here B = 0, we are yet again left with an uninteresting solution. But, happily, (1.7) can hold without B having to be zero. Instead, we can arrange it so that ω is chosen such that sin ωπ = 0, and this happens precisely if ω is an integer. Since we assumed that ω > 0 this means that ω is one of the numbers 1, 2, 3, . . .. Thus we have found that the problem (1.6) has a nontrivial solution exactly if λ has the form λ = n2 , where n is a positive integer, and then the solution is of the form X(x) = Xn (x) = Bn sin nx, where Bn is a constant. For these values of λ, let us also solve the problem T (t) + λT (t) = 0 or 2 T (t) = −n2 T (t), which has the general solution T (t) = Tn (t) = Cn e−n t .

12

1. Introduction

If we let Bn Cn = bn , we have thus arrived at the following result: The homogeneous problem (E)+(B) has the solutions u(x, t) = un (x, t) = bn e−n

2

t

sin nx,

n = 1, 2, 3, . . . .

Because of the homogeneity, all sums of such expressions are also solutions of the same problem. Thus, the homogeneous sub-problem of the original problem (1.4) certainly has the solutions u(x, t) =

N

bn e−n

2

t

sin nx,

(1.8)

n=1

where N is any positive integer and the bn are arbitrary real numbers. The great question now is the following: among all these functions, can we ﬁnd one that satisﬁes the non-homogeneous condition (I): u(x, 0) = f (x) = a known function? Substitution in (1.8) gives the relation f (x) = u(x, 0) =

N

bn sin nx,

0 < x < π.

(1.9)

n=1

If the function f happens to be a linear combination of sine functions of this kind, we can consider the problem as solved. Otherwise, it is rather natural to pose a couple of questions: 1. Can we permit the sum in (1.8) to consist of an inﬁnity of terms? 2. Is it possible to approximate a (more or less) arbitrary function f using sums like the one in (1.9)? The ﬁrst of these questions can be given a partial answer using the theory of uniform convergence. The second question will be answered (in a rather positive way) later on in this book. We shall return to our heat conduction problem in Chapter 6. Exercise 1.2 Find a solution of the problem treated in the text if the initial condition (I) is u(x, 0) = sin 2x + 2 sin 5x.

Historical notes The partial diﬀerential equations mentioned in this section evolved during the eighteenth century for the description of various physical phenomena. The Laplace operator occurs, as its name indicates, in the works of Pierre Simon de Laplace, French astronomer and mathematician (1749–1827). In the theory of

Historical notes

13

analytic functions, however, it had surely been known to Euler before it was given its name. The wave equation was established in the middle of the eighteenth century and studied by several famous mathematicans, such as J. L. R. d’Alembert (1717–83), Leonhard Euler (1707–83) and Daniel Bernoulli (1700–82). The heat equation came into focus at the beginning of the following century. The most important name in its early history is Joseph Fourier (1768–1830). Much of the contents of this book has its origins in the treatise Th´eorie analytique de la chaleur. We shall return to Fourier in the historical notes to Chapter 4.

This page intentionally left blank

2 Preparations

2.1 Complex exponentials Complex numbers are assumed to be familiar to the reader. The set of all complex numbers will be denoted by C. The reader has probably come across complex exponentials at some occasion previously, but, to be on the safe side, we include a short introduction to this subject here. It was discovered by Euler during the eighteenth century that a close connection exists between the exponential function ez and the trigonometric functions cos and sin. One way of seeing this is by considering the Maclaurin expansions of these functions. The exponential function can be described by ez = 1 + z +

∞ zn z2 z3 z4 + + + ··· = , 2! 3! 4! n! n=0

where the series is nicely convergent for all real values of z. Euler had the idea of letting z be a complex number in this formula. In particular, if z is purely imaginary, z = iy with real y, the series can be rewritten as (iy)2 (iy)3 (iy)4 + + + ··· 2! 3! 4! 2 3 4 5 y y y y −i + +i − ··· = 1 + iy − 2! 3! 4! 5! y4 y6 y3 y5 y7 y2 + − + ··· + i y − + − + ··· . == 1− 2! 4! 6! 3! 5! 7!

eiy = 1 + iy +

16

2. Preparations

In the brackets we recognize the well-known expansions of cos and sin: y4 y6 y2 + − + ···, 2! 4! 6! y5 y7 y3 + − + ···. sin y = y − 3! 5! 7!

cos y = 1 −

Accordingly, we deﬁne eiy = cos y + i sin y.

(2.1)

This is one of the so-called Eulerian formulae. The somewhat adventurous motivation through our manipulation of a series can be completely justiﬁed, which is best done in the context of complex analysis. For this book we shall be satisﬁed that the formula is true and can be used. What is more, one can deﬁne exponentials with general complex arguments: ex+iy = ex eiy = ex (cos y + i sin y)

if x and y are real.

The function thus obtained obeys most of the well-known rules for the real exponential function. Notably, we have these rules: ez ew = ez+w ,

1 = e−z , ez

ez = ez−w . ew

It is also true that ez = 0 for all z, but it need no longer be true that ez > 0. Example 2.1. eiπ = cos π + i sin π = −1 + i · 0 = −1. Also, eniπ = (−1)n if n is an integer (positive, negative, or zero). Furthermore, eiπ/2 = i is not even real. Indeed, the range of the function ez for z ∈ C contains all complex numbers except 0. Example √ 2.2. The modulus of a complex number z = x + iy is deﬁned as |z| = zz = x2 + y 2 . As a consequence,

|ez | = |ex+iy | = |ex · eiy | = ex | cos y + i sin y| = ex cos2 y + sin2 y = ex . In particular, if z = iy is a purely imaginary number, then |ez | = |eiy | = 1. Example 2.3. Let us start from the formula eix eiy = ei(x+y) and rewrite both sides of this, using (2.1). On the one hand we have eix eiy = (cos x + i sin x)(cos y + i sin y) = cos x cos y − sin x sin y + i(cos x sin y + sin x cos y), and on the other hand, ei(x+y) = cos(x + y) + i sin(x + y).

2.2 Complex-valued functions of a real variable

17

If we identify the real and imaginary parts of the trigonometric expressions, we see that cos(x + y) = cos x cos y − sin x sin y,

sin(x + y) = cos x sin y + sin x cos y.

Thus the addition theorems for cos and sin are contained in a well-known exponential law! By changing the sign of y in (2.1) and then manipulating the formulae obtained, we ﬁnd the following set of equations: iy

e = cos y + i sin y e−iy = cos y − i sin y

cos y =

eiy + e−iy 2

sin y =

eiy − e−iy 2i

These are the “complete” set of Euler’s formulae. They show how one can pass back and forth between trigonometric expressions and exponentials. Particularly in Chapters 4 and 7, but also in other chapters, we shall use the exponential expressions quite a lot. For this reason, the reader should become adept at using them by doing the exercises at the end of this section. If these things are quite new, the reader is also advised to ﬁnd more exercises in textbooks where complex numbers are treated. Exercises 2.1 Compute the numbers eiπ/2 , e−iπ/4 , e5πi/6 , eln 2−iπ/6 . 2.2 Prove that the function f (z) = ez has period 2πi, i.e., that f (z+2πi) = f (z) for all z. 2.3 Find a formula for cos 3t, expressed in cos t, by manipulating the identity 3 e3it = eit . 2.4 Prove the formula sin3 t = z

3 4

sin t −

1 4

sin 3t.

2.5 Show that if |e | = 1, then z is purely imaginary. 2.6 Prove the de Moivre formula: (cos t + i sin t)n = cos nt + i sin nt,

n integer.

2.2 Complex-valued functions of a real variable In order to perform calculus on complex-valued functions, we should deﬁne limits of such objects. As long as the domain of deﬁnition lies on the real axis, this is quite simple and straightforward. One can use similar formulations as in the all-real case, but now modulus signs stand for moduli of complex numbers. For example: if we state that lim f (t) = A,

t→∞

18

2. Preparations

then we are asserting the following: for every positive number ε, there exists a number R such that as soon as t > R we are assured that |f (t) − A| < ε. If we split f (t) into real and imaginary parts, f (t) = u(t) + iv(t),

u(t) and v(t) real,

the following inequalities hold: |u(t)| ≤ |f (t)|,

|v(t)| ≤ |f (t)|;

|f (t)| ≤ |u(t)| + |v(t)|.

(2.2)

This should make it rather clear that convergence in a complex-valued setting is equivalent to the simultaneous convergence of real and imaginary parts. Indeed, if the latter are both small, then the complex expression is small; and if the complex expression is small, then both its real and imaginary parts must be small. In practice this means that passing to a limit can be done in the real and imaginary parts, which reduces the complex-valued situation to the real-valued case. Thus, if we want to deﬁne the derivative of a complex-valued function f (t) = u(t) + iv(t), we can go about it in two ways. Either we deﬁne f (t) = lim

h→0

f (t + h) − f (t) , h

which stands for an ε-δ notion involving complex numbers, or we can just say that (2.3) f (t) = u (t) + iv (t). These deﬁnitions are indeed equivalent. The derivative of a complex-valued function of a real variable t exists if and only if the real and imaginary parts of f both have derivatives, and in this case we also have the formula (2.3). The following example shows the most frequent case of this, at least in this book. Example 2.4. If f (t) = ect with a complex coeﬃcient c = α + iβ, we can ﬁnd the derivative, according to (2.3), like this: d αt d αt d αt e (cos βt + i sin βt) = e cos βt + i e sin βt dt dt dt = αeαt cos βt − eαt β sin βt + i αeαt sin βt + eαt β cos βt

f (t) =

= eαt (α + iβ)(cos βt + i sin βt) = cect . Similarly, integration can be deﬁned by splitting into real and imaginary parts. If I is an interval, bounded or unbounded, f (t) dt = (u(t) + iv(t)) dt = u(t) dt + i v(t) dt. I

I

I

I

2.2 Complex-valued functions of a real variable

19

If the interval is inﬁnite, the convergence of the integral on the left is equivalent to the simultaneous convergence of the two integrals on the right. A number of familiar rules of computation for diﬀerentiation and integration can easily be shown to hold also for complex-valued functions, with virtually unchanged proofs. This is true for, among others, the diﬀerentiation of products and quotients, and also for integration by parts. The chain rule for derivatives of composite functions also holds true for an expression such as f (g(t)), when g is real-valued but f may take complex values. Absolute convergence of improper integrals follows the same pattern. From (2.2) it follows, by the comparison test integrals, that for generalized f is absolutely convergent if and only if u and v are both absolutely convergent. The fundamental theorem of calculus holds true also for integrals of complex-valued functions: x d f (t) dt = f (x). dx a Example 2.5. Let c be a non-zero real number. To compute the integral of ect over an interval [a, b], we can use the fact that ect is the derivative of a known function, by Example 2.4: ct t=b b e ecb − eca . ect dt = = c t=a c a When estimating the size of an integral the following relation is often useful: b b ≤ f (t) dt |f (t)| dt. a

a

Here the limits a and b can be ﬁnite or inﬁnite. This is rather trivial if f is real-valued, so that the integral of f can be interpreted as the diﬀerence of two areas; but it actually holds also when f is complex-valued. A proof b of this runs like this: The value of a f (t) dt is a complex number I, which can be written in polar form as |I|eiα for some angle α. Then we can write as follows: b b b b −iα = |I| = e−iα f (t) dt f (t) dt = e f (t) dt = Re e−iα f (t) dt a

= a

a

b

a

Re e−iα f (t) dt ≤

a

b

e−iα f (t) dt =

a b

|f (t)| dt. a

Here we used that the left-hand member is real and thus equal to its own real part.

20

2. Preparations

Exercises 2

2.7 Compute the derivative of f (t) = eit by separating into real and imaginary parts. Compare the result with that obtained by using the chain rule, as if everything were real. 2.8 Show that the chain rule holds for the expression f (g(t)), where g is realvalued and f is complex-valued, and t is a real variable.

2.9 Compute the integral

π

eint dt,

−π

where n is an arbitrary integer (positive, negative, or zero).

2.3 Ces`aro summation of series We shall study a method that makes it possible to assign a sort of “sum value” to certain divergent series. For a convergent series, the new method yields the ordinary sum; but, as will be seen in Chapter 4, the method is really valuable when studying a series which may or may not be convergent. Let ak be terms (real or complex numbers), and deﬁne the partial sums sn and the arithmetic means σn of the partial sums like this: sn =

n

1 s1 + s2 + · · · + sn = sk . n n n

ak ,

σn =

k=1

(2.4)

k=1

Lemma 2.1 Suppose that the series

∞

ak is convergent with the sum s.

k=1

Then also lim σn = s.

n→∞

Proof. Let ε > 0 be given. The assumption is that sn → s as n → ∞. This means that there exists an integer N such that |sn − s| < ε/2 for all n > N . For these n we can write s1 + s2 + · · · + sn − ns |σn − s| = n 1 = (s1 − s) + · · · + (sN − s) + (sN +1 − s) + · · · + (sn − s) n N n 1 1 1 1 ε C ε |sk − s| + |sk − s| ≤ · C + · (n − N ) ≤ ≤ + . n n n n 2 n 2 k=1

k=N +1

Here, C is a non-negative constant (that does not depend on n), and so, if n > 2C/ε, the ﬁrst term in the last member is also less than ε/2. Put n0 = max(N, 2C/ε). For all n > n0 we have then |σn − s| < ε, which is the assertion.

2.3 Ces` aro summation of series

21

Deﬁnition ∞ 2.1 Let sn and σn be deﬁned as in (2.4). We say that the `ro or Cesa `ro summable series k=1 ak is summable according to Cesa or summable (C, 1) to the value, or “sum”, s, if lim σn = s. n→∞

We write

∞

ak = s (C, 1).

k=1

The lemma above states that if a series is convergent in the usual sense, then it is also summable (C, 1), and the Ces`aro sum coincides with the ordinary sum. Example 2.6. Let ak = (−1)k−1 , k = 1, 2, 3, . . ., which means that we have the series 1 − 1 + 1 − 1 + 1 − 1 + · · ·. Then sn = 0 if n is even and sn = 1 if n is odd. The means σn are σn =

1 2

if n is even,

Thus we have σn → (C, 1) with sum 12 .

1 2

σn =

1 2 (n

+ 1) n+1 = n 2n

if n is odd.

as n → ∞. This divergent series is indeed summable

The reason for the notation (C, 1) is that it is possible to iterate the process. If the σn do not converge, we can form the means τn = (σ1 + · · · + σn )/n. If the τn converge to a number s one says that the original series is (C, 2)-summable to s, and so on. These methods can be eﬃcient if the terms in the series have diﬀerent signs or are complex numbers. A positive divergent series cannot be summed to anything but +∞, no matter how many means you try. Exercises

∞

2.10 Study the series 1 + 0 − 1 + 1 + 0 − 1 + 1 + 0 − · · ·, i.e., the series k=1 ak , where a3k+1 = 1, a3k+2 = 0 and a3k+3 = −1. Compute the Ces` aro means σn and show that the series has the Ces` aro sum 23 . 2.11 The results of Example 2.6 and the previous exercise can be generalized as follows. Assume that the sequence of partial sums sn is periodic, i.e., that there is a positive integer p such that sn+p = sn for all n. Then the series is summable (C, 1) to the sum σ = (s1 + s2 + · · · + sp )/p. Prove this! 2.12 Show that if

ak has a ﬁnite (C, 1) value, then lim

n→∞

sn = 0. n

What can be said about lim ak /k ? k→∞

ak is (C, 1)-summable, then the series is con2.13 Prove that if ak ≥ 0 and vergent in the usual sense. (Assume the contrary – what does that entail for a positive series?)

22

2. Preparations

∞

2.14 Show that the series k=1 (−1)k k is not summable (C, 1). Also show that it is summable (C, 2). Show that the (C, 2) sum is equal to − 14 . 2.15 Show that, if x = n · 2π (n ∈ Z), 1 2

+

∞

cos kx = 0

(C, 1).

k=1

2.16 Prove that ∞

zn =

n=0

1 1−z

for |z| ≤ 1, z = 1.

(C, 1)

2.4 Positive summation kernels In this section we prove a theorem that is useful in many situations for recovering the values of a function from various kinds of transforms. The main idea is summarized in the following formulation. Theorem 2.1 Let I = (−a, a) be an interval (ﬁnite or inﬁnite). Suppose that {Kn }∞ n=1 is a sequence of real-valued, Riemann-integrable functions deﬁned on I, with the following properties: (1) Kn (s) ≥ 0. a Kn (s) ds = 1. (2) −a

(3) If δ > 0, then lim

n→∞ δ 1. This can now be compressed into one formula: f (t) = (1 − t2 )(1 − H(t + 2)) + (t + 2)(H(t + 2)−H(t − 1)) + (1 − t)H(t − 1) = (1 − t2 ) + (−1 + t2 + t + 2)H(t + 2) + (−t − 2 + 1 − t)H(t − 1) = 1 − t2 + (t2 + t + 1)H(t + 2) − (2t + 1)H(t − 1). Heaviside’s function is connected with the δ function via the formula t H(t) = δ(u) du. −∞

A very bold diﬀerentiation of this formula would give the result H (t) = δ(t).

(2.5)

30

2. Preparations

Since H is constant on the intervals ] − ∞, 0[ and ]0, ∞[, and δ(t) is considered to be zero on these intervals, the formula (2.5) is reasonable for t = 0. What is new is that the “derivative” of the jump discontinuity of H should be considered to be the “pulse” of δ. In fact, this assertion can be given a completely coherent background; this will be done in Chapter 8. If ϕ is a function in the class C 1 , i.e., it has a continuous derivative, and if in addition ϕ is zero outside some ﬁnite interval, the following calculation is clear: ∞ ∞ ∞ ϕ (t)H(t) dt = ϕ (t) dt = ϕ(t) t=0 = 0 − ϕ(0) = −ϕ(0). −∞

0

The same result can also be obtained by the following formal integration by parts: ∞ ∞ ∞ ϕ (t)H(t) dt = ϕ(t)H(t) − ϕ(t)H (t) dt −∞

= (0 − 0) −

−∞ ∞

−∞

−∞

ϕ(t)δ(t) dt = −ϕ(0).

This is characteristic of the way in which these generalized functions can be treated: if they occur in an integral together with an “ordinary” function of suﬃcient regularity, this integral can be treated formally, and the results will be true facts. One can go further and introduce derivatives of the δ functions. What would be, for example, the ﬁrst derivative of δ = δ0 ? One way of ﬁnding out is by operating formally as in the preceding situation. Let ϕ be a function in C 1 , and let it be understood that all integrals are taken over an interval that contains 0 in its interior. Since δ(t) = 0 if t = 0, it is reasonable that also δ (t) = 0 for t = 0. Integration by parts gives b b b δ (t)ϕ(t) dt = δ(t)ϕ(t) − δ(t)ϕ (t) dt = (0 − 0) − ϕ (0) = −ϕ (0). a

a

a

If δ itself serves to pick out the value of a function at the origin, the derivative of δ can thus be used to ﬁnd the value at the same place of the derivative of a function. Another way of seeing δ is to consider δ to be the limit of a diﬀerentiable positive summation kernel, and taking the derivative of the kernel. An example is actually given in Exercise 2.20. As in Example 2.8 on page 23, we study the summation kernel 2 2 n Kn (t) = √ e−n t /2 , 2π (which consists in rescaling the normal probability density function). The derivatives are 2 2 n3 t Kn (t) = − √ e−n t /2 . 2π

2.6 *Some simple distributions

31

K2

K1 t

FIGURE 2.2. q

1/q

t

−q

FIGURE 2.3.

These are illustrated in Figure 2.2. The fact that they approach −δ (t) is proved by integration by parts (which is what Exercise 2.20 is all about). In the theory of electricity, there occurs a phenomenon known as an electric dipole. This consists of two equal but opposite charges ±q at a small distance from each other (see Figure 2.3). If the distance is made smaller and charges increase in proportion to the inverse of the distance, the “limit object” is an idealized dipole. A mathematical model of this object consists of δ , just as a a point charge can be represented by δ. Higher derivatives of δ can also be deﬁned. Using integration by parts one ﬁnds that the nth derivative δ (n) should act according to the formula δ (n) (t)ϕ(t) dt = (−1)n ϕ(n) (0), provided the function ϕ has an nth derivative that is continuous at the origin.

32

2. Preparations

Exercises 2.22 Compute the following integrals (taken over the entire real axis if nothing else is indicated): ∞ (a) (t2 + 3t)(δ(t) − δ(t + 2)) dt (b) 0 e−st δ (t − 1) dt 2t ∞ (n) (d) 0− δ (t) e−st dt (c) e δ (t) dt 2.23 What should be meant by δ(2t), expressed using δ(t) ? Investigate this by manipulating ϕ(t)δ(2t) dt in a suitable way. Generalize to δ(at), a = 0. (The cases a > 0 and a < 0 should be considered separately.) 2.24 Rewrite, using Heaviside windows, the expressions f1 (t) = t|t + 1|, f2 (t) = e−|t| , f3 (t) = sgn t = t/|t| (t = 0), f4 (t) = A if t < a, = B if t > a.

2.7 *Computing with δ We shall now show how one can solve certain problems involving the δ distribution and its derivatives. The ordinary rules for computing with derivatives will still hold true. (We cannot really prove this at the present stage.) For example, the rule for diﬀerentiating a product is valid: (f g) = f g + f g . Example 2.16. If χ is a function that is continuous at a, what should be meant by the product χ(t)δa (t) ? Since δa (t) is “zero” except for at t = a, it can be expected that the values of χ(t) for t = a should not really matter. And we can write as follows: χ(t)δa (t) ϕ(t) dt = δa (t) χ(t)ϕ(t) dt = χ(a)ϕ(a). There is no way to distinguish χ(t)δa (t) from χ(a)δa (t). Thus we have a simpliﬁcation rule: the product of a delta and a continuous function is equal to a scalar multiple of the delta, with coeﬃcient equal to the value of the function at the point where the pulse sits: χ(t)δa (t) = χ(a)δa (t).

(2.6)

If we encounter derivatives of δ, the matter is more complicated. What happens is this: start from (2.6) and diﬀerentiate: χ (t)δa (t) + χ(t)δa (t) = χ(a)δa (t). In the ﬁrst term we can replace χ (t) by χ (a) and then move this term to the other side. We get χ(t)δa (t) = χ(a)δa (t) − χ (a)δa (t). (On second thought, it should not be surprising that the product of a function and a δ somehow takes into account the value of the derivative of the function as well.)

2.7 *Computing with δ

33

What happens when the second derivative is multiplied by a function is left to the reader to ﬁnd out (in Exercise 2.25). Example 2.17. Find the ﬁrst two derivatives of f (t) = |t|. Solution. Rewrite the function without modulus signs, using Heaviside windows: f (t) = |t| = −t(1 − H(t)) + tH(t) = 2tH(t) − t. Diﬀerentiation then gives f (t) = 2H(t) + 2tδ(t) − 1 = 2H(t) − 1. In the last step we used the formula (2.6). In plain language, the derivative of |t| is plus one for positive t and minus one for negative t, just as we know from elementary calculus; at the origin, the value of the derivative is undecided. We proceed to the second derivative: f (t) = 2δ(t) − 0 = 2δ(t). This formula reﬂects the fact that f has derivative zero everywhere outside the origin; whereas at the origin, the delta term indicates that f has a positive jump of two units. This is characteristic of the derivative of a function with jumps. Example 2.18. Another example of the same type, though more complicated. The function f (x) = |x2 − 1| can be rewritten as f (x) = (x2 − 1)H(x − 1) + (1 − x2 )(H(x + 1) − H(x − 1)) +(x2 − 1)(1 − H(x + 1)) = (x2 − 1) 2H(x − 1) − 2H(x + 1) + 1 .

This formula can be diﬀerentiated, using the rule for diﬀerentiating a product: f (x) = 2x 2H(x − 1) − 2H(x + 1) + 1 + (x2 − 1) 2δ(x − 1) − 2δ(x + 1) = 2x 2H(x − 1) − 2H(x + 1) + 1 . In the last step, we used (2.6). One more diﬀerentiation gives f (x) = 2 2H(x − 1) − 2H(x + 1) + 1 + 2x 2δ(x − 1) − 2δ(x + 1) = 2 2H(x − 1) − 2H(x + 1) + 1 + 4δ(x − 1) + 4δ(x + 1). The ﬁrst term contains the classical second derivative of |x2 − 1|, which exists for x = ±1; the two δ terms demonstrate that f has upward jumps of size 4 for x = ±1. The reader should draw pictures of f , f , and f . In the two last examples, the ﬁrst derivative at the “corners” of f is considered to be undecided. The classical point of view is to say that f does

34

2. Preparations

not have a derivative at such a point; when working with distributions, the derivative is thought of as more of a global notion, that always exists, but may lack a precise value at certain points. Example 2.19. Solve the diﬀerential equation y + 2y = δ(t − 1) for t > 0 with the initial value y(0) = 1. Solution. The method of integrating factor can be used. An integrating factor is e2t : e2t y + 2e2t y = e2t δ(t − 1)

⇐⇒

d 2t e y = e2 δ(t − 1). dt

In rewriting the right-hand side we used (2.6). Now we can integrate: e2t y = e2 H(t − 1) + C, where C is a constant. To satisfy the initial condition, we must take C = 1. Thus the solution is y = e2−2t H(t − 1) + e−2t ,

t > 0.

(The reader is recommended to check the solution by diﬀerentiation and substitution into the original equation.) Example 2.20. Find all solutions of the diﬀerential equation y + 4y = δ. Solution. The classical method for this sort of problem amounts to ﬁrst ﬁnding the general solution of the corresponding homogeneous equation, which is yH = C1 cos 2t + C2 sin 2t, where C1 and C2 are arbitrary constants. Then we should ﬁnd some particular solution of the inhomogeneous equation. What kind of expression yP could possibly, after diﬀerentiation and substitution into the left-hand side of the equation, yield the result δ? Apparently, something drastic happens at t = 0. Since δ(t) = 0 for t < 0, the equation can be said to be homogeneous during this period of time. Let us then guess that there is a particular solution of the form yP (t) = u(t)H(t), where u(t) is to be determined. Diﬀerentiation gives yP (t) = u (t)H(t) + u(t)H (t) = u (t)H(t) + u(0)δ(t), yP (t) = u (t)H(t)+u (t)H (t)+u(0)δ (t) = u (t)H(t)+u (0)δ(t)+u(0)δ (t). Substitution into the equation gives u (t)H(t) + u (0)δ(t) + u(0)δ (t) + 4u(t)H(t) = δ(t) or u (t) + 4u(t) H(t) + u (0)δ(t) + u(0)δ (t) = δ(t).

2.7 *Computing with δ

35

The function u should be chosen so that u + 4u = 0, u (0) = 1 and u(0) = 0. This means that u(t) = a cos 2t + b sin 2t, where 0 = u(0) = a and 1 = u (0) = 2b. Thus, u = 12 sin 2t, and yP = 12 sin 2t H(t). The solutions of the problem are thus y = C1 cos 2t + (C2 + 12 H(t)) sin 2t.

Again, the reader is recommended to check the solution.

Example 2.21. In Sec. 1.3, on the wave equation, the ﬁnal example turned out to have a solution that was not really a diﬀerentiable function. Now we can put this right, by allowing the generalized derivatives introduced in this section. The solution involved the function ϕ, deﬁned by ϕ(s) =

1 2

s−

1 2

C for s > 0,

ϕ(s) = − 12 s −

1 2

C for s < 0.

We can rewrite this deﬁnition, using Heaviside windows: ϕ(s) = (− 12 s −

1 2

C)(1 − H(s)) + ( 12 s −

1 2

C)H(s) = − 12 s −

1 2

C + sH(s).

The two ﬁrst derivatives are ϕ (s) = − 12 + H(s) + sδ(s) = − 12 + H(s),

ϕ (s) = δ(s).

The complete solution of the problem in Sec. 1.3 can be written u(x, t) = ϕ(x − t) + ψ(x + t) = ϕ(x − t) + 32 (x + t) +

1 2

C.

Diﬀerentiating, and trusting that the chain rule holds as usual (which it does, as will be proved in Chapter 8), we ﬁnd ux = ϕ (x − t) + and

3 2

ut = −ϕ (x − t) +

= 1 + H(x − t), 3 2

= 2 − H(x − t),

uxx = δ(x − t) utt = δ(x − t).

Thus, uxx = utt as distributions, and u can be considered as a worthy solution of the wave equation. Exercises 2.25 Find a simpler expression for χ(t)δa (t), where χ is a C 2 function. 2.26 Determine the derivatives of order ≤ 2 of the functions f (t) = e−|t| , g(t) = |t|e−|t| and h(t) = | sin t |. Draw pictures! 2.27 Let f : R → R be given by f (x) = 1 − x2 if −1 < x < 1 and f (x) = 0 otherwise. Find f , and then simplify the expression (x2 − 1)f (x) as far as possible. 2.28 Find the derivatives f and f , if f (t) = |t3 − t|. Sketch the graphs of f , f of f in separate pictures.

36

2. Preparations dy + 2ty = δ(t − a). dt (b) y +3y +2y = tH(t)+δ (t).

2.29 Find the general solution of the diﬀerential equation 2.30 Solve the problems (a) y −y = tH(t+1),

2.31 Find y = y(x) that satisﬁes (1 + x2 )y − 2xy = δ(x − 1) and y(0) = 1. 2.32 Establish the following formula for an antiderivative (F being an antiderivative of f ):

f (t)H(t − a) dt = (F (t) − F (a))H(t − a) + C. 2.33 Find a function y = y(x) such that y + 2xy = 2xH(x) − δ(x − 1) and y(2) = 1. (Hint: the result of the preceding exercise may be useful.)

Historical notes Complex numbers began to pop up as early as the Renaissance era, when scholars such as Cardano began solving equations of third and fourth degrees. But not until Leonhard Euler (1707–83) did they begin to be accepted as just as natural as the real numbers. The study of complex-valued functions was intensiﬁed in the nineteenth century; some famous names are Augustin Cauchy (1789–1857), Bernhard Riemann (1826–66), and Karl Weierstrass (1815–97). The idea of “summing” certain divergent series was made precise by mathematicians such as the young Norwegian Niels Henrik Abel (1802–29) and Carl Friedrich Gauss (1777–1855). The method presented in Sec. 2.3 is due `ro (1859–1906), but the German to the Italian mathematician Ernesto Cesa ¨ lder (1859–1937) had the same idea at about the same time. Otto Ho Riemann is the originator of an integral deﬁnition which is even today in universal use for elementary education. His deﬁnition has certain disadvantages, that were remedied by Henri Lebesgue (1875–1941) in his 1900 thesis. The Lebesgue integral is, however, even after one century considered to be too complicated to be included in elementary courses. The theory of distributions is chronicled after Chapter 8.

Problems for Chapter 2 2.34 Show that the function f (z) = e4z has period πi/2. 2.35 Let f be a continuous function on R. Assume that we know that it has period 2π and that it satisﬁes the equation f (t) =

1 2

f t − 12 π + f t + 12 π

for all t ∈ R.

Show that f in fact has a period shorter than 2π, and determine this period. 2.36 Let ϕ be a C 1 function such that ϕ and ϕ are bounded on the real axis. Compute the limit lim

n→∞

2n3 π

∞

−∞

x ϕ(x) dx. (1 + n2 x2 )2

Problems for Chapter 2

37

2.37 Let F (x) = (1 − x2 )(H(x + 1) − H(x − 1)). Let g be continuous on the interval [−1, 1]. Find the limit

3 n→∞ 4

1

nF (nx) g(x) dx.

lim

−1

2.38 Find the derivatives of order ≤ 4 of f (t) = t2 H(t). 2.39 Find y(x) that solves the diﬀerential equation y + satisﬁes y(1) = 1.

x2 + 1 y = δ(x − 2) and x

2.40 Let f : R → R be described by f (x) = (x2 − 1)2 (H(x + 1) − H(x − 1)). Show that f belongs to the class C 1 but not to C 2 . Also compute its third derivative.

This page intentionally left blank

3 Laplace and Z transforms

3.1 The Laplace transform Let f be a function deﬁned on the interval R+ = [0, ∞[. Alternatively, we can think of f (t) as being deﬁned for all real t, but satisfying f (t) = 0 for all t < 0. This can be expressed by writing f (t) = f (t)H(t), where H is the Heaviside function. Now let s be a real (or complex, if you like) number. If the integral ∞ f (s) = f (t) e−st dt (3.1) 0

exists (with a ﬁnite value), we say that it is the Laplace transform of f , evaluated at the point s. We shall write, interchangeably, f(s) or L[f ](s). In applications, one also often uses the notation F (s) (capital letter for the transform of the corresponding lower-case letter). Example 3.1. Let f (t) = eat , t ≥ 0. Then, (a−s)t ∞ ∞ ∞ e 1 f (t) e−st dt = eat−st dt = = , a − s t=0 s−a 0 0 provided that a − s < 0 so that the evaluation at inﬁnity yields zero. Thus we have f(s) = 1/(s − a) for s > a, or L[eat ](s) =

1 , s−a

s > a.

40

3. Laplace and Z transforms

In particular, if a = 0, we have the Laplace transform of the constant function 1: it is equal to 1/s for s > 0. Example 3.2. Let f (t) = t, t > 0. Then, integrating by parts, we get ∞ ∞ e−st 1 ∞ −st f (s) = te dt = t · + 1 · e−st dt −s t=0 s 0 0 1 1 = 0 + L[1](s) = 2 . s s This works for s > 0. It may happen that the Laplace transform does not exist for any real 2 value of s. Examples of this are given by f (t) = 1/t, f (t) = et . A profound understanding of the workings of the Laplace transform requires considering it to be a so-called analytic function of a complex variable, but in most of this book we shall assume that the variable s is real. We shall, however, permit the function f to take complex values: it is practical to be allowed to work with functions such as f (t) = eiαt . Furthermore, we shall assume that the integral (3.1) is not merely convergent, but that it actually converges This enables us to estimate absolutely. integrals, using the inequality | f | ≤ |f |. Example 3.3. Let f (t) = eibt . Then we can imitate Example 3.1 above and write (ib−s)t ∞ ∞ ∞ e f (t) e−st dt = e(ib−s)t dt = ib − s t=0 0 0 ∞ 1 −st e (cos bt + i sin bt) t=0 . = ib − s For s > 0 the substitution as t → ∞ will tend to zero, because the factor e−st tends to zero and the rest of the expression is bounded. The result is thus that L[eibt ](s) = 1/(s − ib), which means that the formula that we proved in Example 3.1 holds true also when a is purely imaginary. It is left to the reader to check that the same formula holds if a is an arbitrary complex number and s > Re a. It would be convenient to have some simple set of conditions on a function f that ensure that the Laplace transform is absolutely convergent for some value of s. Such a set of conditions is given in the following deﬁnition. Deﬁnition 3.1 Let k be a positive number. Assume that f has the following properties: (i) f is continuous on [0, ∞[ except possibly for a ﬁnite number of jump discontinuities in every ﬁnite subinterval; (ii) there is a positive number M such that |f (t)| ≤ M ekt for all t ≥ 0. Then we say that f belongs to the class Ek . If f ∈ Ek for some value of k, we say that f ∈ E.

3.1 The Laplace transform

Using set notation we can say that E =

41

Ek . Condition (ii) means that

k>0

f grows at most exponentially; this word lies behind the use of the letter E. If f ∈ Ek for one value of k, then also f ∈ Ek for all larger k. Theorem 3.1 If f ∈ Ek , then f(s) exists for all s > k. Proof. We begin by observing that condition (i) for the class Ek implies that the integral T f (t) e−st dt 0

exists ﬁnitely for all s and all T > 0. Now assume s > k. Thus there exists a number M and a number t0 so that f (t)e−kt ≤ M for t > t0 . Then we can estimate as follows: T T T −st −kt −(s−k)t |f (t)| e dt = |f (t)| e e dt ≤ M e−(s−k)t dt t0 t0 t0 ∞ ∞ M −(s−k)t ≤M e dt ≤ M e−(s−k)t dt = < ∞. s−k t0 0 This means that the generalized integral over [t0 , ∞[ converges absolutely, and then this is equally true for the integral over [0, ∞[. The result of the theorem can be “bootstrapped” in the following way. If σ0 = inf{k : f ∈ Ek }, then the Laplace transform exists for all s > σ0 . Indeed, let k = (s + σ0 )/2, so that σ0 < k < s; then f ∈ Ek (why?), and the theorem can be applied. The number σ0 is a reasonably exact measure of the rate of growth of the function f . In what follows we shall sometimes use the notation σ0 or σ0 (f ) for this measure. As a consequence of the theorem we now know that a large set of common functions do have Laplace transforms. Among them are, e.g., polynomials, trigonometric functions such as sin and cos and ordinary exponential functions; also sums and products of such functions. If you have studied simple diﬀerential equations you may recall that these functions are precisely the possible solutions of homogeneous linear diﬀerential equations with constant coeﬃcients, such as, for example, y (v) + 4y (iv) − 8y + 15y − 24y = 0. We shall soon see that Laplace transforms give us a new technique for solving these equations. We shall also be able to solve more general problems, like integral equations of this kind: t t f (t − x) f (x) dx + 3 f (x) dx + 2t = 0, t > 0. (3.2) 0

0

Another consequence of the theorem is worth emphasizing: if a Laplace transform exists for one value of s, then it is also deﬁned for all larger

42

3. Laplace and Z transforms

values of s. If we are dealing with several diﬀerent transforms having various domains, we can always be sure that they are all deﬁned at least in one common semi-inﬁnite interval. It is customary to be rather sloppy about specifying the domains of deﬁnition for Laplace transforms: we make a tacit agreement that s is large enough so that all transforms occuring in a given situation are deﬁned. Exercises 2

2

3.1 Let f (t) = et , g(t) = e−t . Show that f ∈ / E, whereas g ∈ Ek for all k. 3.2 Compute the Laplace transform of f (t) = eat , where a = α + iβ is a complex constant. 3.3 Let f (t) = sin t for 0 ≤ t ≤ π, f (t) = 0 otherwise. Find f(s).

3.2 Operations The Laplace transformation obeys some simple rules of computation and also some less simple rules. The simplest ones are collected in the following table. Everywhere we assume that s takes suﬃciently large values, as discussed at the end of the preceding section. 1. L[αf + βg](s) = αf(s) + β g (s), if α and β are constants. 2. L[eat f (t)](s) = f(s − a), if a is a constant (damping rule). 3. If we deﬁne f (t) = 0 for t < 0 and if a > 0, then L[f (t − a)](s) = e−as f(s)

(delaying rule).

1 f (s/a), if a > 0. a The proofs of these rules are easy. As an example we give the computations that yield rules 3 and 4: ∞ u= t−a du = dt f (t − a) e−st dt L[f (t − a)](s) = 0 t = 0 ⇔ u = −a ∞ ∞ −s(u+a) −as = f (u) e du = e f (u) e−su du 4. L[f (at)](s) =

−a

= e−as

−a ∞

f (u) e−su du = e−as f(s);

0

∞ du u = at L[f (at)](s) = f (at) e dt = f (u) e−s·u/a du = a dt a 0 0 ∞ 1 s 1 s . f (u) exp − · u du = f = a 0 a a a

∞

−st

3.2 Operations

43

Example 3.4. Using rule 1 and the result of Example 3.3 in the preceding section, we can ﬁnd the Laplace transforms of cos and sin: 1 s 1 ibt −ibt 1 1 + = 2 ](s) = 2 , L[cos bt](s) = 2 L[e + e s − ib s + ib s + b2 1 b 1 1 1 = 2 L[sin bt](s) = L[eibt − e−ibt ](s) = . − 2i 2i s − ib s + ib s + b2 Example 3.5. Applying rule 2 to the result of Example 3.4 we get L[eat cos bt](s) =

s−a , (s − a)2 + b2

L[eat sin bt](s) =

b . (s − a)2 + b2

A couple of deeper rules are given in the following theorems. Theorem 3.2 If f ∈ Ek0 , then (t → tf (t)) ∈ Ek1 for k1 > k0 and L[tf (t)](s) = −

d f (s). ds

Proof. We shall use a theorem on diﬀerentiation of integrals. In order to keep it lucid, we assume that f is continuous on the whole of R+ ; otherwise we would have to split into integrals over subintervals where f is continuous, and this introduces certain purely technical complications. Since f ∈ Ek0 , we know that |f (t)| ≤ M ek0 t for some number M and all suﬃciently large t, say t > t1 . Let δ > 0. Then there is a t2 such that |t| < eδt for t > t2 . If t > t0 = max(t1 , t2 ) we have |tf (t)| ≤ eδt · M ek0 t = M e(k0 +δ)t = M ek1 t , which means that tf (t) belongs to Ek1 and has a Laplace transform. ∞ If we diﬀerentiate the formula f(s) = 0 f (t) e−st dt formally with re ∞ spect to s, we get f (s) = 0 (−t)f (t) e−st dt. According to the theorem concerning diﬀerentiation of integrals, this maneuver is permitted if we can ﬁnd a “dominating” function g (that may depend on t but not on s) such that the integrand in the diﬀerentiated formula can be estimated by g for ∞ all t ≥ 0 and all values of s that we consider, and which is such that 0 g is convergent. Let a be a number greater than the constant k1 and put g(t) = |tf (t) e−at |. For all s ≥ a we have then |(−t) f (t) e−st | ≤ g(t), and ∞ ∞ ∞ −at g(t) dt = |tf (t)|e dt ≤ M ek1 t · e−at dt 0 0 0 ∞ M =M e−(a−k1 )t dt = < ∞. a − k1 0

44

3. Laplace and Z transforms

This shows that the conditions for diﬀerentiating formally are fulﬁlled, and the theorem is proved. Example 3.6. We know that L[1](s) = 1/s for s > 0. Then we can say that d 1 1 1 L[t](s) = L[t · 1](s) = − = − − 2 = 2 , s > 0. ds s s s Repeating this argument (do it!) we ﬁnd that L[tn ](s) =

n! sn+1

,

s > 0.

Example 3.7. Also, rule 2 allows us to conclude that L[tn eat ](s) =

n! , (s − a)n+1

s > 0.

A sort of reverse of Theorem 3.2 is the following. The notation f (0+) stands for the right-hand limit lim f (t) = lim f (t). t→0+

t0

Theorem 3.3 Assume that f ∈ E is continuous on R+ . Also assume that the derivative f (t) exists for all t ≥ 0 (with f (0) interpreted as the righthand derivative) and that f ∈ E. Then L[f ](s) = s f(s) − f (0+). Proof. Suppose that f ∈ Ek0 and f ∈ Ek1 , and take s to be larger than both k0 and k1 . Let T be a positive number. Integration by parts gives T T f (t) e−st dt = f (T ) e−sT − f (0+) e0 + s f (t) e−st dt. 0

0

When T → ∞, the ﬁrst term in the right-hand member tends to zero, and the result is the desired formula. Theorem 3.3 will be used for solving diﬀerential equations. The following theorem states a few additional properties of the Laplace transform. Theorem 3.4 (a) If f ∈ E, then lim f(s) = 0.

s→∞

(3.3)

(b) The initial value rule: If f (0+) exists, then lim sf(s) = f (0+).

s→∞

(3.4)

3.2 Operations

45

(c) The ﬁnal value rule: If f (t) has a limit as t → +∞, then lim sf(s) = f (+∞) = lim f (t).

(3.5)

t→∞

s0+

In applications, the rule (3.5) is useful for deciding the ultimate or “steady-state” behavior of a function or a signal. Proof. (a) Let ε > 0 be given and choose δ > 0 so small that δ |f (t)| dt < ε. 0

Let k > 0 be such that f ∈ Ek and let s0 > k. Then for s > s0 we get ∞ δ |f (t)| e−st dt + |f (t)| e−st dt |f(s)| ≤ ≤

0

0

δ

|f (t)| dt +

≤ ε + e−(s−s0 )δ

δ ∞

δ ∞

|f (t)| e−s0 t e−(s−s0 )t dt

|f (t)|e−s0 t dt ≤ ε + Ce−(s−s0 )δ = ε + Ceδs0 · e−δs .

δ

The last term tends to zero as s → ∞ and thus it is less than ε if s is large enough. This proves that |f(s)| < 2ε for all suﬃciently large s, and since ε can be arbitrarily small, we have proved (3.3). (b) The idea of proof is similar to the preceding. ε > 0 is arbitrary, but now we choose δ > 0 so small that |f (t) − f (0+)| < ε for 0 < t < δ. With s0 as above we get, for s > s0 , sf(s) δ =s (f (t) − f (0+)) e−st dt + sf (0+) 0

δ

e−st dt + s

0

∞

f (t) e−st dt.

δ

The modulus of the ﬁrst term is δ ∞ 1 ≤ sε e−st dt ≤ sε e−st dt = sε · = ε, s 0 0

if s > 0.

The second term can be computed: = sf (0+)

1 − e−sδ = f (0+)(1 − e−sδ ) → f (0+) s

as s → ∞.

Finally, the modulus of the third term can be estimated: ∞ ∞ ≤s |f (t)|e−s0 t e−(s−s0 )t dt ≤ se−sδ · es0 δ |f (t)| e−s0 t dt = Cse−δs , δ

δ

which tends to zero as s → ∞. Just as in the proof of (3.3) we can draw the conclusion (3.4).

46

3. Laplace and Z transforms

(c) This proof also runs along similar paths. We begin by writing T ∞ sf(s) = s f (t) e−st dt + s (f (t) − f (∞))e−st dt + f (∞)e−sT . 0

T

Choose T so large that |f (t) − f (∞)| < ε for t ≥ T . The modulus of the T ﬁrst term can be estimated by s 0 |f | → 0 as s → 0+, and the modulus of the second one is ∞ ≤s ε · e−st dt = ε e−sT ≤ ε. T

The proof is ﬁnished in an analogous way to the others. We round oﬀ this section by a generalization of the rule for Laplace transformation of a power t (cf. Example 3.6). To this end we need a generalization of factorials to non-integers. This is provided by Euler’s Gamma function, whis is deﬁned by ∞ Γ(x) = ux−1 e−u du, x > 0. 0

It is easy to see that this integral converges for positive x. It is also easy to see that Γ(1) = 1. Integrating by parts we ﬁnd ∞ ∞ ∞ x −u x −u u e du = −u e +x ux−1 e−u du = xΓ(x). Γ(x + 1) = 0

0

0

From this we deduce that Γ(2) = 1 · Γ(1) = 1, Γ(3) = 2, and, by induction, Γ(n + 1) = n! for integral n. Thus, this function can be viewed as an interpolation of the factorial. Now we let f (t) = ta , where a > −1. It is then clear that f has a Laplace transform, and we ﬁnd, for s > 0, ∞ ! ∞ u a −u du st = u a −st t e dt = e f (s) = dt = du/s s s 0 0 ∞ Γ(a + 1) 1 ua e−u du = . = a+1 s sa+1 0 If a is an integer, this reduces to the formula of Example 3.6. Exercises 3.4 Find the Laplace transforms of (a) 2t2 − e−t (b) (t2 + 1)2 (c) (sin t − cos t)2 (d) cosh2 4t

3.5 Compute the Laplace transform of f (t) =

3.6 Find the transform of f (t) =

(e) e2t sin 3t

1/ε for 0 < t < ε, 0 otherwise.

(t − 1)2 for t > 1, 0 otherwise.

(f) t3 sin 3t.

3.3 Applications to diﬀerential equations

t

1 − e−u du. u

3.7 Solve the same problem for f (t) = 0

∞

3.8 Compute

47

t e−3t sin t dt. (Hint: f(3) !)

0

3.9 Find the Laplace transform of f , if we deﬁne f (t) = t sin t for 0 ≤ t ≤ π, f (t) = 0 otherwise. (Hint: use the result of Exercise 3.3, p. 42.) 3.10 Find the Laplace transform of the function f deﬁned by f (t) = na

n − 1 ≤ x < n,

for

n = 1, 2, 3, . . . .

3.11 Compute L[te−t sin t](s). 3.12 Explain why the function f ∈ E.

s2 cannot be the Laplace transform of any s2 + 1

3.13 Show that if f is periodic with period a, then f(s) =

∞

∞ a(k+1)

(Hint: 0 = 0 ak a geometric series.)

1 1 − e−as

a

f (t) e−st dt.

0

. Let u = t − ak, use the formula for the sum of

3.14 Find the Laplace transform of the function with period 1 that is described by f (t) = t for 0 < t < 1. 3.15 Verify the ﬁnal value rule (3.5) for f(s) = 1/(s(s + 1)) by comparing f (t) and lim sf(s). s→0+

3.16 Prove that Γ

1 2

=

√

π. What are the values of Γ

3 2

and Γ

5 2

?

3.3 Applications to diﬀerential equations Example 3.8. Let us try to solve the initial value problem y − 4y + 3y = t,

t > 0;

y(0) = 3,

y (0) = 2.

(3.6)

We assume that y = y(t) is a solution such that y, as well as y and y , has a Laplace transform. By Theorem 3.3 we have then L[y ](s) = s y − y(0) = s y − 3, L[y ](s) = sL[y ](s) − y (0) = s(s y − 3) − 2 = s2 y − 3s − 2. Due to linearity, we can transform the left-hand side of the equation to get (s2 y − 3s − 2) − 4(s y − 3) + 3 y = (s2 − 4s + 3) y − 3s + 10,

48

3. Laplace and Z transforms

and this must be equal to the transform of the right-hand side, which is 1/s2 . The result is an algebraic equation, which we can solve for y: (s2 − 4s + 3) y − 3s + 10 =

3s3 − 10s2 + 1 1 3s3 − 10s2 + 1 = . ⇐⇒ y = s2 s2 (s2 − 4s + 3) s2 (s − 1)(s − 3)

The last expression can be expanded into partial fractions. Assume that 3s3 − 10s2 + 1 B A C D = 2+ + + . s2 (s − 1)(s − 3) s s s−1 s−3 Multiplying by the common denominator and identifying coeﬃcients we ﬁnd that A = 13 , B = 49 , C = 3, and D = − 49 . Thus we have y =

1 3

·

1 + s2

4 9

·

1 1 +3· − s s−1

4 9

·

1 . s−3

It so happens that there exists a function with precisely this Laplace transform, namely, the function z = 13 t +

4 9

+ 3et − 49 e3t .

Could it be the case that y = z ? One way of ﬁnding this out is by diﬀerentiating and investigating if indeed z does satisfy the equation and initial conditions. And it does (check for yourself)! By the general theory of differential equations, the problem (3.6) has a unique solution, and it follows that z must be the solution we are looking for. The example demonstrates a very useful method for treating linear intitial value problems. There is one diﬃculty that is revealed at the end of the example: could it be possible that two diﬀerent functions might have the same Laplace transform? This question is answered by the following theorem. Theorem 3.5 (Uniqueness for Laplace transforms) If f and g both belong to E, and f(s) = g(s) for all (suﬃciently) large values of s, then f (t) = g(t) for all values of t where f and g are continuous. We omit the proof of this at this point. It is given in Sec. 7.10. In that section we also prove a formula for the reconstruction of f (t) when f(s) is known — a so-called inversion formula for the Laplace transform. The present theorem, however, gives us the possibility to invert Laplace transforms by recognizing functions, just as we did in the example. This requires that we have access to a table of Laplace transforms of such functions that can be expected to occur. Such a table is found at the end of the book (p. 247 ﬀ), and similar tables are included in all decent handbooks on the subject. Several of the entries in such tables have already been proved in the examples of this chapter; others can be done as exercises by the interested student.

3.3 Applications to diﬀerential equations

49

We point out that the uniqueness result as such does not rule out the possibility that a diﬀerential equation (or other problem) may have solutions that have no Laplace transforms, e.g., solutions that grow faster than exponentially. To preclude such solutions one must look into the theory of diﬀerential equations. For linear equations there is a result on unique solutions for initial value problems, which may serve the purpose. If the coeﬃcients are constants and the equation is homogeneous, one actually knows that all solutions have at most exponential growth. The Laplace transform method is ideally adapted to solving initial value problems. Strictly speaking, the method takes into consideration only what goes on for t ≥ 0. Very often, however, the expressions obtained for the solutions are also valid for t < 0. We include some examples on using a table of Laplace transforms in a few more complicated situations. The technique may remind the reader of the integration of rational functions. Example 3.9. Find f (t), when f(s) =

2s + 3 . s2 + 4s + 13

Solution. Complete the square in the denominator: s2 +4s+13 = (s+2)2 +9. Then split the numerator to enable us to recognize transforms of cosines and sines: s2

2s + 3 s+2 2(s + 2) − 1 =2· − = 2 2 + 4s + 13 (s + 2) + 3 (s + 2)2 + 32

1 3

·

3 , (s + 2)2 + 32

and now we can see that this is the transform of f (t) = 2e−2t cos 3t − 1 −2t sin 3t. 3e Example 3.10. Find g(t), if g(s) =

2s . (s2 + 1)2

Solution. We recognize the transform as a derivative: g(s) = −

1 d . 2 ds s + 1

By Theorem 3.2 and the known transform of the sine we get g(t) = t sin t. Example 3.11. Solve the initial value problem y + 4y + 13y = 13,

y(0) = y (0) = 0.

Solution. Transformation gives (s2 + 4s + 13) y=

13 13 . ⇐⇒ y = s s (s + 2)2 + 9

50

3. Laplace and Z transforms

Expand into partial fractions: y =

s+4 1 s+2 1 − = − − s (s + 2)2 + 9 s (s + 2)2 + 9

The solution is found to be y(t) = 1 − e−2t (cos 3t +

2 3

2 3

·

3 . (s + 2)2 + 9

sin 3t) H(t).

(Here we have multiplied the result by a Heaviside factor, to indicate that we are considering the solution only for t ≥ 0. This factor is often omitted. Whether or not it should be there is often a matter of dispute among users of the transform.) We can also treat systems of diﬀerential equations. Example 3.12. Solve the initial value problem x = x + 3y, x(0) = 5, y(0) = 1. y = 3x + y;

Solution. Laplace transformation gives s x−5= x + 3 y ⇐⇒ s y − 1 = 3 x + y

(1 − s) x + 3 y = −5 3 x + (1 − s) y = −1

We can, for example, solve the second equation for x = 13 (s − 1) y − 31 and 2 substitute this into the ﬁrst, whereupon simpliﬁcation yields (s −2s−8) y= s + 14 and 2 s + 14 3 − . y = = (s − 4)(s + 2) s−4 s+2 We see that y = 3e4t − 2e−2t , and then we deduce, in one way or another, that x = 3e4t + 2e−2t . (Think of at least three diﬀerent ways of performing this last step!) Finally, we demonstrate how even a partial diﬀerential equation can be treated by Laplace transforms. The trick is to transform with respect to one of the independent variables and let the others stand. Using this technique often involves taking rather bold chances in the hope that rules of computation be valid. One way of regarding this is to view it precisely as taking chances – if we arrive at a tentative solution, it can always be checked by substitution in the original problem. Example 3.13. Find a solution of the problem ∂2u ∂u , = 2 ∂x ∂t

0 < x < 1, t > 0;

u(0, t) = 1, u(1, t) = 1, u(x, 0) = 1 + sin πx,

t > 0;

0 < x < 1.

3.3 Applications to diﬀerential equations

51

Solution. We introduce the Laplace transform U (x, s) of u(x, t), i.e., ∞ u(x, t) e−st dt. U (x, s) = L[t → u(x, t)](s) = 0

Here, x is thought of as a constant. Then we change our attitude and assume that this integral can be diﬀerentiated with respect to x, indeed twice, so that ∞ ∞ 2 ∂2U ∂ ∂2 −st = u(x, t) e dt = u(x, t) e−st dt. 2 ∂x2 ∂x2 0 ∂x 0 The diﬀerential equation is then transformed into ∂2U = sU − (1 + sin πx), ∂x2

0 < x < 1,

and the boundary conditions into U (0, s) =

1 , s

U (1, s) =

1 . s

Now we switch attitudes again: think of s as a constant and solve the boundary value problem. Just to feel comfortable we could write the equation as U − sU = −1 − sin πx. (3.7) The homogeneous equation equation r2 − s = 0 and √ has a characteristic √ x s −x s its solution is UH = Ae + Be . (Here, the “constants” A and B are in general functions of s.) A particular solution to the inhomogeneous equation could have the form UP = a + b sin πx + c cos πx, and insertion and identiﬁcation gives a = 1/s, b = 1/(s + π 2 ), c = 0. Thus the general solution of (3.7) is √ s

U (x, s) = A(s)ex

√ s

+ B(s)e−x

+

1 sin πx . + s s + π2

The boundary conditions force us to take A(s) = B(s) = 0, so we are left sin πx 1 with U (x, s) = + . Now we again consider x as a constant and s s + π2 2 recognize that U is the Laplace transform of u(x, t) = 1 + e−π t sin πx. The fact that this function really does solve the original problem must be checked directly (since we have made an assumption on diﬀerentiability of an integral, which might have been too bold). Remark. This problem can also be attacked by other methods developed in later parts of the book (Chapter 6).

52

3. Laplace and Z transforms

Exercises 3.17 Invert the following Laplace transforms: (c)

1 s(s + 2)2

(d)

5 s2 (s − 5)2

(e)

(a)

1 s(s + 1)

1 (s − a)(s − b)

3 (s − 1)2 1 (f) 2 . s + 4s + 29 (b)

3.18 Use partial fractions to ﬁnd f when f(s) is given by (a) s−2 (s + 1)−1 , (b) b2 s−1 (s2 + b2 )−1 , (c) s(s − 3)−5 , (d) (s2 + 2)s−1 (s + 1)−1 (s + 2)−1 . 3.19 Invert the following Laplace transforms: (c) ln

s+3 s+2

(d) ln

s2 + 1 s(s + 3)

s+1 s4/3

(e)

1 + e−s √ s s−1 (f) . s (a)

(b)

e−s (s − 1)(s − 2)

3.20 Solve the initial value problem y + y = 2et , t > 0, y(0) = y (0) = 2.

3.21 Solve the initial value problem

3.22 Solve

y (t) − 2y (t) + y(t) = t et sin t, y(0) = 0, y (0) = 0.

y (3) (t) − y (t) + 4y (t) − 4y(t) = −3et + 4e2t , y(0) = 0, y (0) = 5, y (0) = 3.

x (t) + y (t) = t,

3.23 Solve the system

x (t) − y(t) = e−t , x(0) = 3, x (0) = −2, y(0) = 0.

x (t) − y (t) − 2x(t) + 2y(t) = sin t, 3.24 Solve the system

x (t) + 2y (t) + x(t) = 0, x(0) = x (0) = y(0) = 0.

3.25 Solve the problem

y (t) − 3y (t) + 2y(t) =

1, t > 2 ; 0, t < 2

y(0) = 1, y (0) = 0.

3.26 Solve the system

dy = 2z − 2y + e−t dt

dz = y − 3z

t > 0;

y(0) = 1,

z(0) = 2.

dt

3.27 Solve the diﬀerential equation 2y (iv) + y − y − y − y = t + 2,

t > 0,

with initial conditions y(0) = y (0) = 0, y (0) = y (0) = 1. 3.28 Solve the diﬀerential equation y + 3y + 2y = e−t sin t,

t > 0;

y(0) = 1,

y (0) = −3.

3.4 Convolution

53

3.4 Convolution In control theory, for example, one studies the eﬀect on an incoming signal by a “black box” that transforms it into an “outsignal”: insignal →

black box

outsignal →

Let the insignal be represented by the function t → x(t), t ≥ 0, and the outsignal by t → y(t), t ≥ 0. We assume that the system has four important properties: (a) it is linear, which means that a linear combination of inputs results in the corresponding linear combination of outputs; (b) it is translation invariant, which means, loosely, that the black box operates in the same way at all points in time; (c) it is continuous in the sense that “small” changes in the input generate “small” changes in the output (which should be formulated more precisely when necessary); (d) it is causal, i.e., the outsignal at a certain moment t does not depend on the insignal at moments later than t. It can then be shown (see Appendix A) that there exists a function t → g(t), t ≥ 0, such that y(t) = 0

t

x(u)g(t − u) du =

0

t

x(t − u)g(u) du.

(3.8)

The function g can be said to contain all information about the system. The formula (3.8) is an example of a notion called the convolution of the two functions x and g. (We shall encounter other versions of convolution in other parts of this book.) We shall now study this notion from a mathematical point of view. Thus, we assume that f and g are two functions, both belonging to E. The convolution f ∗ g is a new function deﬁned by the formula t (f ∗ g)(t) = f ∗ g(t) = f (u) g(t − u) du, t ≥ 0. 0

It is not hard to see that this function is continuous on [0, ∞[, and it might possibly belong to E. Indeed, it is not very diﬃcult to show directly that if f ∈ Ek1 and g ∈ Ek2 , then f ∗ g ∈ Ek for all k > max(k1 , k2 ). (See Exercise 3.38.) Using the notation σ0 (f ), introduced after Theorem 3.1, we could express this as σ0 (f ∗ g) ≤ max σ0 (f ), σ0 (g) .)

54

3. Laplace and Z transforms

Convolution can be regarded as an operation for functions, a sort of “multiplication.” For this operation a few simple rules hold; the reader is invited to check them out: f ∗g =g∗f (commutative law) f ∗ (g ∗ h) = (f ∗ g) ∗ h (associative law) f ∗ (g + h) = f ∗ g + f ∗ h (distributive law) Example 3.14. Let f (t) = et , g(t) = e−2t . Then t t t f ∗ g(t) = eu e−2(t−u) du = eu−2t+2u du = e−2t e3u du 0

−2t

=e

1

3u u=t 3 e u=0

0

=

1 −2t 3e

0

et − e−2t e −1 = . 3 3t

t

Example 3.15. If g(t) = 1, then f ∗g(t) = 0 f (u) du. Thus, “integration” can be considered to be convolution with the function 1. When dealing with convolutions, the Laplace transform is useful because of the following theorem. Theorem 3.6 The Laplace transform of a convolution is the product of the Laplace transforms of the two convolution factors: L[f ∗ g](s) = f(s) g(s). Proof. Let s be so large that both f(s) and g(s) exist. We have agreed in section 3.1 that this means that the corresponding integrals converge absolutely. Now consider the improper double integral |f (u)g(v)|e−s(u+v) du dv, Q

where Q is the ﬁrst quadrant in the uv plane. The integrated function being positive, the integral can be calculated just as we choose. For example, we can write ∞ ∞ |f (u)g(v)|e−s(u+v) du dv = du |f (u)||g(v)|e−su e−sv dv 0

Q

= 0

0

∞

−su

|f (u)|e

du 0

∞

|g(v)|e−sv dv.

The two one-dimensional integrals here are assumed to be convergent, which means that the double integral also converges. But this in turn means that the improper double integral without modulus signs, Φ(s) = f (u)g(v)e−s(u+v) du dv Q

3.4 Convolution

55

is absolutely convergent. It can then also be computed in any manner, and we do it in two ways. One way is imitating the previous calculation: ∞ ∞ Φ(s) = du f (u)g(v)e−su e−sv dv 0 0 ∞ ∞ = f (u)e−su du g(v)e−sv dv = f(s) g(s). 0

0

Another way is integrating on triangles DT : u ≥ 0, v ≥ 0, u + v ≤ T . But T T t −st f ∗ g(t)e dt = f (u)g(t − u) du e−su dt 0

T

=

0

t

dt 0

0 T

=

f (u)e−su g(t − u)e−s(t−u) du

f (u)e−su du

0

T

=

f (u)e−su du

0

=

0

T

g(t − u)e−s(t−u) dt =

u T −u

t−u=v dt = dv

g(v)e−sv dv

0

f (u)g(v)e−su e−sv du dv → Φ(s)

DT

as T → ∞. This proves the formula in the theorem.

Example 3.16. As an illustration of the theorem we can take the situation in Example 3.14. There we have f(s) = f(s) g (s) =

1 , s−1

g(s) =

1 , s+2

1 1 1 = 3 − 3 = L[f ∗ g](s). (s − 1)(s + 2) s−1 s+2

Example 3.17. Find a function f that satisﬁes the integral equation ∞ f (t) = 1 + f (t − u) sin u du, t ≥ 0. 0

Solution. Suppose that f ∈ E. Then we can transform the equation to get 1 1 , f(s) = + f(s) · 2 s s +1 from which we solve s2 + 1 1 s2 + 1 1 1 = f(s) = · = + 3, 2 3 s s s s s

56

3. Laplace and Z transforms

and we see that f (t) = 1 + 12 t2 ought to be a solution. Indeed it is, because this function belongs to E, and then our successive steps make up a sequence of equivalent statements. (It is also possible to check the solution by substitution in the given integral equation. This should be done, if time permits.) Exercises 3.29 Calculate directly the convolution of eat and ebt (consider separately the cases a = b and a = b). Check the result by taking Laplace transforms. 3.30 Use the convolution formula to determine f if f(s) is given by (a) s−1 (s + 1)−1 , (b) s−1 (s2 + a2 )−1 . 3.31 Find a function with the Laplace transform

(s2

s2 . + 1)2

3.32 Find a function f such that

x

e−y cos y f (x − y) dy = x2 e−x ,

x ≥ 0.

0

3.33 Find a solution of the integral equation

t

(t − u)2 f (u) du = t3 ,

t ≥ 0.

0

3.34 Find two solutions of the integral equation (3.2) on page 41. 3.35 Find a function y(t) that satisﬁes y(0) = 0 and

2

t

(t − u)2 y(u) du + y (t) = (t − 1)2

for t > 0.

0

3.36 Find a function f (t) for t ≥ 0, that satisﬁes f (0) = 1,

f (t) + 3f (t) +

t

f (u)eu−t du =

0

0, 0 ≤ t < 2, . 1, t > 2

3.37 Find a solution f of the integral-diﬀerential equation 5e−t

t

ey cos 2(t − y) f (y) dy = f (t) + f (t) − e−t ,

f (0) = 0.

0

3.38 Prove the following result: if f ∈ Ek1 and g ∈ Ek2 , then f ∗ g ∈ Ek for all k > max{k1 , k2 }.

3.5 *Laplace transforms of distributions

57

3.5 *Laplace transforms of distributions Laplace transforms can be used in the study of physical phenomena that take place in a time interval that starts at a certain moment, at which the clock is set to t = 0. It is possible to allow the functions to include instantaneous pulses and even more far-reaching generalizations of the classical notion of a function – i.e., to allow so-called distributions into the game. When we do so, it will normally be a good thing to allow such things to happen also at the very moment t = 0, so we modify slightly the deﬁnition of the Laplace transform into the following formula: ∞ ∞ f(s) = f (t)e−st dt = lim f (t)e−st dt. ε0

0−

−ε

If f is an ordinary function, the modiﬁed deﬁnition agrees with the former one. But if f is a distribution, something new may occur. As an example, let δa (t) be the Dirac pulse at the point a, where a ≥ 0. Then ∞ δa (s) = δa (t)e−st dt = e−as . 0−

= 1. We see that the rule that a Laplace In particular, if a = 0, we get δ(s) transform must tend to zero as s → ∞ no longer need hold for transforms of distributions. The formula for the transform of a derivative must also be slightly modiﬁed. Indeed, integration by parts gives ∞ ∞ ∞ f (s) = f (t)e−st dt = f (t)e−st +s f (t)e−st dt = sf(s)−f (0−), 0−

0−

0−

where f (0−) is the left-hand limit of f (t) at 0. This may cause some confusion when dealing with functions that are considered to be zero for negative t but nonzero for positive t. In this case it may now happen that f includes a multiple of δ, which explains the diﬀerent appearance of the formula. In this situation, it is preferable to be very explicit in supplying the factor H(t) in the description of functions. Example 3.18. Solve the initial value problem y + 4y + 13y = δ (t),

y(0−) = y (0−) = 0.

Solution. Transformation gives (s2 +4s+13) y = s ⇐⇒ y =

3 s+2 2 s = − · . (s + 2)2 + 9 (s + 2)2 + 9 3 (s + 2)2 + 9

58

3. Laplace and Z transforms

The solution is found to be y(t) = e−2t (cos 3t −

2 3

sin 3t)H(t).

We check it by diﬀerentiating: y (t) = e−2t (−2 cos 3t + −2t

=e

(−4 cos 3t −

y (t) = e−2t (8 cos 3t + = e−2t (3 cos 3t +

4 3 5 3

10 3 46 3

sin 3t − 3 sin 3t − 2 cos 3t)H(t) + δ(t) sin 3t)H(t) + δ(t),

sin 3t + 12 sin 3t − 5 cos 3t)H(t) − 4δ(t) + δ (t) sin 3t)H(t) − 4δ(t) + δ (t).

Substituting this into the left-hand member of the equation, one sees that it indeed solves the problem. Example 3.19. Find the general solution of the diﬀerential equation y + 3y + 2y = δ. Solution. It should be wellknown that the solution can be written as the sum of the general solution yH of the corresponding homogeneous equation y + 3y + 2y = 0, and one particular solution yP of the given equation. We easily ﬁnd yH = C1 e−t + C2 e−2t , and proceed to look for yP . In doing this we assume that yP (0−) = yP (0−) = 0, which gives the simplest Laplace 2 transforms. Indeed, y" yP and y" " P , so that P = s" P =s y yP + 2" yP = 1 ⇐⇒ y" s2 y" P + 3s" P = Thus it turns out that

1 1 1 = − . (s + 1)(s + 2) s+1 s+2

yP = e−t − e−2t H(t).

This means that the solution of the given problem is y = C1 e−t + C2 e−2t + e−t − e−2t H(t) = (C1 +H(t))e−t + (C2 −H(t))e−2t t < 0, C1 e−t + C2 e−2t , = (C1 + 1)e−t + (C2 − 1)e−2t , t > 0. We can see that in each of the intervals t < 0 and t > 0 these expressions are solutions of the homogeneous equation, which is in accordance with the fact that δ = 0 in the intervals. What happens at t = 0 is that the constants change value in such a way that the ﬁrst derivative has a jump discontinuity and the second derivative contains a δ pulse (draw pictures!). The particular solution yP found in the preceding problem is called a fundamental solution of the equation. Let us now denote it by E; thus, E(t) = e−t − e−2t H(t).

3.5 *Laplace transforms of distributions

59

It is useful in the following situation. Let f be any function, continuous for t ≥ 0. We want to ﬁnd a solution of the problem y + 3y + 2y = f . If we assume y(0−) = y (0−) = 0, we get y =

1 f(s) = f(s) · 2 = f(s)E(s). 2 s + 3s + 2 s + 3s + 2

This means that y can be found as the convolution of f and E: y(t) = f ∗ E(t) =

0

t

f (t − u) e−u − e−2u du.

The fundamental solution thus provides a means for ﬁnding a particular solution for any inhomogeneuous equation with the given left-hand side. This idea can be applied to any linear diﬀerential equation with constant coeﬃcients. The left-hand member of such an equation can be written in the form P (D)y, where D is the diﬀerentiation operator and P (·) is a polynomial. For example, if P (r) = r2 + 3r + 2, then P (D)y = (D2 + 3D + 2)y = y + 3y + 2y. The fundamental solution E is, in the general case, the function such that 1 , P (s)

E(s) =

E(t) = 0 for t < 0.

Exercises 3.39 Find a solution of the diﬀerential equation y + 3y + 3y + y = H(t − 1) + δ(t − 2), that satisﬁes y(0) = y (0) = y (0) = 0. 3.40 Solve the diﬀerential equation y + 4y + 5y = δ(t), y(t) = 0 for t < 0. Then deduce a formula for a particular solution of the equation y + 4y + 5y = f (t), where f is any continuous function such that f (t) = 0 for t < 0. 3.41 Find fundamental solutions for the following equations: (b) y + 4y + 8y = δ, (c) y + 3y + 3y + y = δ.

(a) y + 4y = δ,

3.42 Find a function y such that y(t) = 0 for t ≤ 0 and y (t) + 3y(t) + 2

t

y(u) du = 2 H(t − 1) − H(t − 2) for t > 0. 0

3.43 Find a function f (t) such that f (t) = 0 for t < 0 and e−t

t+

0−

f (p) ep dp − f (t) + f (t) = δ(t) − t e−t H(t),

−∞ < t < ∞.

60

3. Laplace and Z transforms

3.6 The Z transform In this section we sketch the theory of a discrete analogue of the Laplace transform. We have so far been considering functions t → f (t), where t is a real variable (mostly thought of as representing time). Now, we shall think of t as a variable that only assumes the values 0, 1, 2, . . . , i.e., non-negative integer values. In applications, this is sometimes more realistic than considering a continuous variable; it corresponds to taking measurements at equidistant points in time. A function of an integer variable is mostly written as a sequence of numbers. This will be the way we do it, at least at the beginning of the section. Let {an }∞ n=0 be a sequence of numbers. We form the inﬁnite series A(z) =

∞ ∞ an = an z −n . n z n=0 n=0

If the series is convergent for some z, then it converges absolutely outside of some circle in the complex plane. More precisely, the domain of convergence is a set of the type |z| > σ, where 0 ≤ σ ≤ ∞. (It may also happen that the series converges at certain points on the circle |z| = σ, but this is rarely of any importance.) Power series of this kind, that may encompass both positive and negative powers of z, are called Laurent series. (A particular case is Taylor series that do not contain any negative powers of z; in the present situation we are considering a reversed case, with no positive powers.) A necessary and suﬃcient condition for the series to converge at all is that there exist constants M and R such that |an | ≤ M Rn for all n. This condition is analogous to the condition of exponential growth for functions to have a Laplace transform. The function A(z) is called the Z transform of the sequence {an }∞ n=0 . It can be employed to solve certain problems concerning sequences, in a manner that is largely analogous to the way that Laplace transforms can be used for solving problems for ordinary functions. Important applications occur in the theory of electronics, systems engineering, and automatic control. When working with the Z transformation, one should be familiar with the geometric series. Recall that this is the series ∞

wn ,

n=0

where w is a real or complex number. It is convergent precisely if |w| < 1, and its sum is then 1/(1 − w). This fact is used “in both directions,” as the following example shows.

3.6 The Z transform

61

Example 3.20. If an = 1 for all n ≥ 0, the Z transform is ∞ ∞ 1 !n 1 = = zn z n=0 n=0

1 1 1− z

=

z , z−1

which is convergent for all z such that |z| > 1. On the other hand, if λ is a nonzero complex number, we can rewrite the function B(z) = z/(z − λ) in this way: B(z) =

z = z−λ

1 1−

λ z

=

∞ ∞ λ !n λn = , z zn n=0 n=0

|z| > |λ|,

which shows that B(z) is the transform of the sequence bn = λn (n ≥ 0). (Here we actually use the fact that Laurent expansions are unique, which implies that two diﬀerent sequences cannot have the same transform.) We next present a simple, but typical, problem where the transform can be used. Example 3.21. If we know that a0 = 1, a1 = 2 and an+2 = 3an+1 − 2an ,

n = 0, 1, 2, . . . ,

(3.9)

ﬁnd a formula for an . An equation of the type (3.9) is often called a diﬀerence equation. In many respects, it is analogous to a diﬀerential equation: if diﬀerential equations are used for the description of processes taking place in “continuous time,” diﬀerence equations can do the corresponding thing in “discrete time.” To solve the problem in Example 3.21, we multiply the formula (3.9) by z −n and add up for n = 0, 1, 2, . . .: ∞

an+2 z −n = 3

n=0

∞

an+1 z −n − 2

n=0

∞

an z −n .

(3.10)

n=0

Now we introduce the Z transform of the sequence {an }∞ n=0 : ∞

A(z) =

an z −n = 1 +

n=0

2 a2 a3 + 2 + 3 + ···. z z z

(3.11)

We notice that, ﬁrstly, ∞

an+1 z −n =

n=0

∞

# ak z −(k−1) = z

k=1

= z(A(z) − 1), and, secondly,

∞

k=1

$ ak z −k

# =z

∞

n=0

$ an z −n − a0

62

3. Laplace and Z transforms

∞ n=0

an+2 z

−n

=

∞

# ak z

−(k−2)

=z

2

k=2

#

=z

2

∞

$ ak z

k=2 ∞

an z

−n

n=0

a1 − a0 − z

$

−k

2 = z 2 A(z) − 1 − . z

Thus, the equation (3.10) can be written as 2 2 z A(z) − 1 − = 3z(A(z) − 1) − 2A(z), z from which A(z) can be solved. After simpliﬁcation we have A(z) =

z . z−2

We saw in the preceding example that this is the Z transform of the sequence an = 2n , n = 0, 1, 2, . . . . We can check the result by returning to the statement of the problem: a0 = 1 and a1 = 2 are all right; and if an = 2n and an+1 = 2n+1 , then 3an+1 − 2an = 3 · 2n+1 − 2 · 2n = 3 · 2n+1 − 2n+1 = 2 · 2n+1 = 2n+2 , which is also right. In the example, it is obvious from the beginning that the solution is unique. If a0 and a1 are given, the formula (3.9) produces the subsequent values of the an in an unequivocal way. In general, problems about number sequences are often uniquely determined in the same manner. However, just as for the Laplace transform, the Z transform cannot be expected to give solutions if these are very fast-growing sequences. We take a closer look at the correspondence between sequences {an }∞ n=0 and their Z transforms A(z). In order to have an eﬃcient notation we write a = {an }∞ n=0 and A = Z[a]. Thus, Z denotes a mapping from (a subset of) the set of number sequences to the set of Laurent series convergent outside of some circle. Example 3.22. We have already seen that if a = {λn }∞ 0 , then Z[a](z) =

∞ n=0

λn z −n =

z , z−λ

|z| > |λ|.

Example 3.23. If a = {1/n!}∞ 0 , then Z[a](z) =

∞ z −n = e1/z , |z| > 0. n! n=0

3.6 The Z transform

63

Example 3.24. The sequence a = {n!}∞ 0 has no Z transform, because ∞ n! z −n diverges for all z. the series n=0

As stated at the beginning of this section, a suﬃcient (and actually necessary) condition for A(z) to exist is that the numbers an grow at most exponentially: |an | ≤ M Rn for some numbers M and R. It is easy to see that this condition implies the convergence of the series for all z with |z| > R. Some computational rules for the transformation Z have been collected in the following theorem. In the interest of brevity we introduce some notation for operations on number sequences (which can be viewed as functions N → ∞ ∞ C). If we let a = {an }∞ n=0 and b = {bn }n=0 , we write a + b = {an + bn }n=0 ; ∞ and if furthermore λ is a complex number, we put λa = {λan }n=0 . We also agree to write A = Z[a], B = Z[b]. The “radius of convergence” of the Z transform of a is denoted by σa : this means that the series is convergent for |z| > σa (and divergent for |z| < σa ). Theorem 3.7 (i) The transformation Z is linear, i.e., Z[λa](z) = λZ[a](z), |z| > σa , Z[a + b](z) = Z[a](z) + Z[b](z), |z| > max(σa , σb ). (ii) If λ is a complex number and bn = λn an , n = 0, 1, 2, . . ., then B(z) = A(z/λ),

|z| > λσa .

(iii) If k is a ﬁxed integer > 0 and bn = an+k , n = 0, 1, 2, . . ., then a1 ak−1 B(z) = z k A(z) − a0 − − · · · − k−1 z z = z k A(z) − a0 z k − a1 z k−1 − · · · − ak−1 z,

|z| > σa .

(iv) Conversely, if k is a positive integer and bn = an−k for n ≥ k and bn = 0 for n < k, then B(z) = z −k A(z). (v) If bn = nan , n = 0, 1, 2, . . ., then B(z) = −z A (z),

|z| > σa .

Proof. The assertions follow rather immediately from the deﬁnitions. We saw a couple of cases of (iii) in Example 3.21 above. We content ourselves by sketching the proofs of (ii) and (v). For (ii) we ﬁnd −n ∞ ∞ ∞ z −n n −n bn z = λ an z = an = A(z/λ). B(z) = λ n=0 n=0 n=0

64

3. Laplace and Z transforms

And as for (v), the right-hand side is ∞ ∞ ∞ d −n −n−1 −z· an z = −z (−n)an z = nan z −n = left-hand side. dz n=0 n=0 n=0

Example 3.25. Example 3.23 and rule (ii) give us the transform of the sequence {λn /n!}∞ 0 , viz., Λ(z) = e1/(z/λ) = eλ/z . When solving problems concerning the Z transform, you should have a table at hand, containing rules of computation as well as actual transforms. Such a table is included at the end of this book (p. 250). Example 3.26. Find a formula for the so-called Fibonacci numbers, which are deﬁned by f0 = f1 = 1, fn+2 = fn+1 + fn for n ≥ 0. Solution. Let F = Z[f ]. If we Z-transform the recursion formula, using (iii) from the theorem, we get z 2 F (z) − z 2 − z = (zF (z) − z) + F (z), whence (z 2 − z − 1)F (z) = z 2 and F (z) =

z2 z =z· 2 . z2 − z − 1 z −z−1

In order to recover fn , a good idea would be to expand into partial fractions, in the hope that simple expressions could be looked up in the table on page 250. A closer look at this table reveals, however, that it would be a good thing to have a z in the numerator of the partial fractions, instead of just a constant. Thus, here we have peeled oﬀ a factor z from F (z) and proceed to expand the remaining expression: A F (z) z B = = 2 + , z z −z−1 z−α z−β where α=

√ 1+ 5 , 2

β=

√ 1− 5 , 2

5+1 √ , 2 5

This gives F (z) =

√

√ A=

Bz Az + z−α z−β

B=

5−1 √ . 2 5

3.6 The Z transform

65

and from the table we conclude that √ √ n √ √ n 5+1 1+ 5 5−1 1− 5 n n √ + √ . fn = Aα + Bβ = 2 2 2 5 2 5 This can be rewritten as % √ n+1 & √ n+1 1 1− 5 1+ 5 fn = √ , − 2 2 5 (In spite of all the appearances of all n ≥ 0.)

√

n = 0, 1, 2, . . . .

5 in the expression, it is an integer for

As you can see in this example, the method of expanding rational functions into partial fractions can be useful in dealing with Z transforms, provided one starts out by securing an extra factor z to be reintroduced in the numerators after the expansion. If a and b are two number sequences, we can form a third sequence, c, called the convolution of a and b, by writing cn =

n k=0

an−k bk =

n

ak bn−k ,

n = 0, 1, 2, . . . .

k=0

One writes c = a ∗ b, and we also permit ourselves to write things like cn = (a ∗ b)n . We determine the Z transform C = Z[c]: C(z) = =

∞ n n=0 k=0 ∞ ∞

an−k bk z −n =

∞ ∞

an−k bk z −n

k=0 n=k

an−k z −(n−k) bk z −k =

k=0 n=k ∞ ∞ = bk z −k am z −m m=0 k=0

∞

bk z −k

k=0

∞

an−k z −(n−k)

n=k

= A(z)B(z).

The manipulations of the double series are permitted for |z| > max(σa , σb ), because in that region everything converges absolutely. This notion of convolution appears in, e.g., control theory, if a system is considered in discrete time (see Appendix A). Example 3.27. Find x(t), t = 0, 1, 2, . . ., from the equation t k=0

3−k x(t − k) = 2−t ,

t = 0, 1, 2, . . . .

66

3. Laplace and Z transforms

Solution. The left-hand side is the convolution of x and the function t → (1/3)t , so that taking Z transforms of both members gives z z−

1 3

· X(z) =

z z−

1 2

.

(We have used the result of Example 3.22.) We get z) =

z− z−

1 3 1 2

=

z z−

1 2

−

1 3

·

1 , z − 12

and, using Example 3.22 and rule (iv) of Theorem 3.7, we see that 1 for t = 0, x(t) = 1 t 1 1 t−1 −3· 2 for t ≥ 1. 2 The ﬁnal expression can be rewritten as t−1 x(t) = 12 − 13 · 12 = 16 · 21−t =

1 3

· 2−t ,

t ≥ 1.

In a ﬁnal example, we indicate a way of viewing the Z transform as a particular case of the Laplace transform. Here we use translates of the Dirac delta “function,” as in Sec. 3.5. Example 3.28. Let {an }∞ n=0 be a sequence having a Z transform A(z), and deﬁne a function f by f (t) =

∞

an δn (t) =

n=0

∞

an δ(t − n).

n=0

The convergence of this series is no problem, because for any particular t at most one of the terms is diﬀerent from zero. Its Laplace transform must be ∞ ∞ ∞ ∞ −n f(s) = e−st an δ(t − n) dt = an e−ns = an es = A(es ). n=0

0−

n=0

n=0

Thus, via a change of variable z = es , the two transforms are more or less the same thing. Exercises 3.44 Determine the Z transforms of the following sequences {an }∞ n=0 : 1 n 2 n (b) an = n · 3 (c) an = n · 2 (a) an = n 2 n(n − 1) · · · (n − p + 1) n (d) an = = for n ≥ p, = 0 for 0 ≤ n ≤ p (p p! p is a ﬁxed integer).

3.7 Applications in control theory

67

3.45 Determine the sequence a = {an }∞ n=0 , if its Z transform is (a) A(z) = z 1 , (b) A(z) = . 3z − 2 z 3.46 Determine the numbers an and bn , n = 0, 1, 2, . . ., if a0 = 0, b0 = 1 and

an+1 + bn = −2n, an + bn+1 = 1,

n = 0, 1, 2, . . . .

3.47 Find the numbers an and bn , n = 0, 1, 2, . . ., if a0 = 0, b0 = 1 and

an+1 + bn = 2, an − bn+1 = 0,

n = 0, 1, 2, . . . .

3.48 Find an , n = 0, 1, 2, . . ., such that a0 = a1 = 0 and an+2 − 3an+1 + 2an = 1 − 2n for n = 0, 1, 2, . . .. 3.49 Find an , n = 0, 1, 2, . . ., if a0 = a1 = 0 and an+2 + 2an+1 + an = (−1)n n,

n = 0, 1, 2, . . . .

3.50 Find an , n = 0, 1, 2, . . ., if a0 = 1, a1 = 3 and an+2 + an = 2n + 4 when n ≥ 0. 3.51 Determine the numbers y(t) for t = 0, 1, 2, . . . , so that t

t−k

(t − k) 3

y(k) =

k=0

3.52 Find an for n ≥ 0, if a0 = 0 and

n

0, t = 0, 1, t = 1, 2, 3, . . . .

kan−k − an+1 = 2n for n ≥ 0.

k=0

3.53 Determine x(n) for n = 0, 1, 2, . . ., so that x(n) + 2

n

(n − k) x(k) = 2n ,

n = 0, 1, 2, . . . .

k=0

3.7 Applications in control theory We return to the “black box” of Sec. 3.4 (p. 53). Such a box can often be described by a diﬀerential equation of the type P (D)y(t) = x(t), where x is the input and y the output. If x(t) is taken to be a unit pulse, x(t) = δ(t), the solution y(t) with y(t) = 0 for t < 0 is called the pulse response, or impulse response, of the black box. The pulse response is the same thing as the fundamental solution. In the general case, Laplace transformation will give P (s) y (s) = 1 and thus y(s) = 1/P (s). The function G(s) =

1 P (s)

68

3. Laplace and Z transforms

is called the transfer function of the box. When solving the general problem P (D)y(t) = x(t),

y(t) = 0 for t < 0,

Laplace transformation will now result in P (s) y (s) = x (s) or y(s) = G(s) x(s). This formula is actually the Laplace transform of the convolution formula (3.8) of page 53. It provides a quick way of ﬁnding the outsignal y to any insignal x. The function g in the convolution is actually the impulse response. In control theory, great importance is attached to the notion of stability. A black box is stable, if its impulse response is transient, i.e., g(t) tends to zero as time goes by. This means that disturbances in the input will aﬀect the output only for a short time and will not accumulate. If P (s) is a polynomial, the impulse response will be transient if and only if all its zeroes have negative real parts. Example 3.29. The polynomial P1 (s) = s2 + 2s + 2 has zeroes s = −1±i. Both have real part −1, so that the device described by the equation y +2y +2y = x(t) is √ stable. In contrast, the polynomial P2 (s) = s2 +2s−1 has zeroes s = −1 ± 2. One of these is positive, which implies that the corresponding black box is unstable. Finally, the polynomial P3 (s) = s2 + 1 has zeroes s = ±i. These have real part zero; the impulse reponse is g(t) = sin t, which is not transient. The situation is considered as unstable. (It is unstable also inasmuch as a small disturbance of the coeﬃcients of P3 (s) can cause the zeroes to move into the right half-plane, which gives rise to exponentially growing solutions.) So far, we have assumed that the black box is described in continuous time. In the real world, it is often more realistic to assume that time is discrete, i.e., that input and output are sampled at equidistant points in time. For simplicity, we assume that the sampling is done at t = 0, 1, 2, . . ., and that the input signal x(t) and the output y(t) are both zero for t < 0. Then, of course, the Z transform is the adequate tool. A black box is often described by a diﬀerence equation of the type y(t+k)+ak−1 y(t+k−1)+· · ·+a2 y(t+2)+a1 y(t+1)+a0 y(t) = x(t), t ∈ Z. (3.12) We introduce the characteristic polynomial P (z) = z k + ak−1 z k−1 + · · · + a2 z 2 + a1 z + a0 . We assumed that x(t) and y(t) were both zero for negative t. Putting t = −k in (3.12), we ﬁnd that y(0) = x(−k) − ak−1 y(−1) − · · · − a1 y(−k + 1) − a0 y(−k),

3.7 Applications in control theory

69

which implies that also y(0) = 0. Consequently, putting t = −k + 1, also y(1) = 0, and so on. Not until we have an x(t) that is diﬀerent from zero do we ﬁnd a y(t + k) diﬀerent from zero. Thus we have initial values y(0) = · · · = y(k − 1) = 0. By the rules for the Z transform, we can then easily transform the equation (3.12). With obvious notation we get P (z)Y (z) = X(z). Thus, Y (z) =

X(z) = G(z)X(z), P (z)

where G(z) = 1/P (z) is the transfer function. Just as in the previous situation, it is also the impulse response, because it is the output resulting from inputting the signal δ(t) = 1 for t = 0,

δ(t) = 0 otherwise.

The stability of equation (3.12) hinges on the localization of the zeroes of the polynomial P (z). As can be seen from a table of Z transforms, a zero a of P (z) implies that the solution contains terms involving at . Thus we have stability precisely if all the zeroes of P (z) are in the interior of the unit disc |z| < 1. Example 3.30. The diﬀerence equation y(t + 2) + 12 y(t + 1) + 14 y(t) = x(t) √ has P (z) = z 2 + 12 z + 14 with zeroes z = − 14 ± 43 i. These satisfy |z| = 12 < 1, so that the equation is stable. The equation y(t + 3) + 2y(t + 2) − y(t + 1) + 2y(t) = x(t) is unstable. This can be seen from the constant term (= 2) of the characteristic polynomial; as is well known, this term is (plus or minus) the product of the zeroes, which implies that these cannot all be of modulus less than one. More sophisticated methods for localizing the zeroes of polynomials can be found in the literature on complex analysis and in books dealing with these applications. Exercises 3.54 Investigate the stability of the following equations: (a) y +2y +3y = x(t), (b) y +3y +3y +y = x(t), 3.55 Are these diﬀerence equations stable or unstable? (a) 2y(t + 2) − 2y(t + 1) + y(t) = x(t), (b) y(t + 2) − y(t + 1) + y(t) = x(t), (c) 2y(t + 3) − y(t + 2) + 3y(t + 1) + 3y(t) = x(t).

(c) y +4y = x(t).

70

3. Laplace and Z transforms

Summary of Chapter 3 To provide an overview of the results of this chapter, we collect the main deﬁnitions and theorems here. The precise details of the conditions for the validity of the results are sometimes indicated rather sketchily. Thus, this summary should serve as a memory refresher. Details should be looked up in the core of the text. Facts that rather belong in a table of transforms, such as rules of computation, are not included here, but can be found at the end of the book (p. 247 ﬀ).

Deﬁnition If f (t) is deﬁned for t ∈ R and f (t) = 0 for t < 0, its Laplace transform is deﬁned by ∞ f(s) = f (t)e−st dt, 0

provided the integral is abolutely convergent for some value of s. Theorem For f to exist it is suﬃcient that f grows at most exponentially, i.e., that |f (t)| ≤ M ekt for some constants M and k. Theorem If f(s) = g(s) for all (suﬃciently large) s, then f (t) = g(t) for all t where both f and g are continuous. Theorem If we deﬁne the convolution h = f ∗ g by t t h(t) = f ∗ g(t) = f (t − u)g(u) du = f (u)g(t − u) du, 0

0

then its Laplace transform is h = fg. Deﬁnition If {an }∞ n=0 is a sequence of numbers, its zeta transform is deﬁned by A(z) =

∞

an z −n ,

n=0

provided the series is convergent for some value of z. This holds if |an | ≤ M Rn for some constants M and R.

Historical notes The Laplace transform is, not surprisingly, found in the works of Pierre Simon de Laplace, notably his Th´eorie analytique des probabilit´es of 1812. In this book, he made free use of Laplace transforms and also generating functions (which are related to the Z transform) in a way that baﬄed his contemporaries. During the

Problems for Chapter 3

71

nineteenth century, the technique was developed further, and also inﬂuenced by similar ideas such as the “operational calculus” of Oliver Heaviside (British physicist and applied mathematician, 1850–1925). With the development of modern technology in computing and control theory, the importance of these methods has grown enormously.

Problems for Chapter 3 3.56 Solve the system y − 2z = (1 − t)e−t , z + 2y = 2te−t , t > 0, with initial conditions y(0) = 0, z(0) = 1. 3.57 Solve the problem y + 2y + 2y = 5et , t > 0; y(0) = 1, y (0) = 0. 3.58 Solve the problem y + y + y − 3y = 1, t > 0, when y(0) = y (0) = 0, y (0) = 1. 3.59 Solve the problem y + 4y = f (t), t > 0; y(0) = 0, y (0) = 1, where

f (t) =

(t − 1)2 , t ≥ 1 0, 0 < t < 1.

3.60 Find y = y(t) for t > 0 that solves y −4y +5y = ϕ(t), y(0) = 2, y (0) = 0, where ϕ(t) = 0 for t < 2, ϕ(t) = 5 for t > 2. 3.61 Find f (t) for t ≥ 0, such that f (0) = 1 and

8

t

f (t − u) e−u du + f (t) − 3f (t) + 2e−t = 0,

t > 0.

0

3.62 Let f be the function described by f (t) = 0, t ≤ 0;

f (t) = t, 0 < t ≤ 1;

f (t) = 1, t > 1.

Solve the diﬀerential equation y (t) + y(t) = f (t) with initial values y(0) = 0, y (0) = 1. 3.63 Solve y + y = t − 1, y(0) = 2, y (0) = y (0) = 0. 3.64 Solve y + 3y + 3y + y = t + 3, t > 0; y(0) = 0, y (0) = 1, y (0) = 2. 3.65 Solve the initial value problem

z − y = e−t , y + y + z + z = 0,

t > 0;

y(0) = 0, z(0) = 0,

y (0) = 1; z (0) = −1.

3.66 Find f such that f (0) = 1 and −t

2e

t

(t − u) eu f (u) du + f (t) + 2t2 e−t = 0.

0

3.67 Solve the problem

y (t) + 2z (t) − y(t) = 4et , z (t) − 2y (t) − z(t) = 0,

t > 0;

y(0) = 0, y (0) = 2, z(0) = z (0) = 0.

72

3. Laplace and Z transforms

3.68 Solve y + y + y + y = 4e−t , t > 0; y(0) = 0, y (0) = 3, y (0) = −6. 3.69 Find f that solves

t

f (u)(t − u) sin(t − u) du − 2f (t) = 12e−t , t > 0;

f (0) = 6.

0

3.70 Solve y + 3y + y − 5y = 0, t > 0; y(0) = 1, y (0) = −2, y (0) = 3. 3.71 Solve y (t) + y (t) + 4y (t) + 4y(t) = 8t + 4, t > 0, with initial values y(0) = −1, y (0) = 4, y (0) = 0. 3.72 Solve y + y + y + y = 2e−t , t > 0; y(0) = 0, y (0) = 2, y (0) = −2. 3.73 Find a solution y = y(t) for t > 0 to the initial value problem y + 2ty − 4y = 1, y(0) = y (0) = 0. 3.74 Find a solution of the partial diﬀerential equation utt + 2ut + xux + u = xt for x > 0, t > 0, such that u(x, 0) = ut (x, 0) = 0 for x > 0 and u(0, t) = 0 for t > 0. 3.75 Use Laplace transformation to ﬁnd a solution of y (t) − ty (t) + y(t) = 5,

t > 0;

y(0) = 5,

y (0) = 3.

3.76 Find f such that f (t) = 0 for t < 0 and −t

5e

t

ey cos 2(t − y) f (y) dy = f (t) + f (t) − e−t ,

t > 0.

0

3.77 Solve the integral equation y(t) +

t 0

(t − u) y(u) du = 3 sin 2t.

3.78 Solve the diﬀerence equation an+2 − 2an+1 + an = bn for n ≥ 0 with initial values a0 = a1 = 0 and right-hand member (a) bn = 1, (b) bn = en , (c) b0 = 1, bn = 0 for n > 0.

4 Fourier series

4.1 Deﬁnitions We are going to solve, as far as we can, the approximation problem that was presented in Sec. 1.4. The strategy will perhaps appear somewhat surprising: starting from a function f , we shall deﬁne a certain series, and in due time we shall ﬁnd that the function can be recovered from this series in various ways. All functions that we consider will have period 2π. The whole theory could just as well be carried through for functions having some other period. This is equivalent to the standard case that we treat, via a simple linear transformation of the independent variable. The formulae that hold in the general case are collected in Sec. 4.5. A function deﬁned on R with period 2π can alternatively be thought of as deﬁned on the unit circle T, the variable being the polar coordinate. We shall frequently take this point of view. For example, the integral of f over an interval of one period can be written T f (t) dt. When we want to compute this integral, we can choose any convenient period interval for the actual calculations:

=

T

π

= −π

2π

= 0

a+2π

,

a ∈ R.

a

(If T is viewed as a circle, the integral T f (t) dt is not to be considered as a line integral of the sort used to calculate amounts of work in mechanics, or

74

4. Fourier series

that appears in complex analysis. Instead, it is a line integral with respect to arc length.) One must be careful when working on T and speaking of notions such as continuity. The statement that f ∈ C(T) must mean that f is continuous at all points of the circle. If we switch to viewing f as a 2π-periodic function, this function must also be continuous. The formula f (t) = t for −π < t < π, for instance, deﬁnes a function that cannot be made continuous on T: at the point on T that corresponds to t = ±π, the limits of f (t) from diﬀerent directions are diﬀerent. Similar care must be taken when speaking of functions belonging to C k (T), i.e., having continuous derivatives of orders up to and including k. As an example, the deﬁnition g(t) = t2 , |t| ≤ π, describes a function that is in C(T), but not in C 1 (T). The ﬁrst derivative does not exist at t = ±π. This can be seen graphically by drawing the periodic continuation, which has corners at these points (sketch a picture!). Let us now do a preparatory maneuver. Suppose that a function f is the sum of a series ∞ f (t) = cn eint = cn eint . (4.1) n=−∞

n∈Z

We assume that the coeﬃcients cn are complex numbers such that |cn | < ∞. n∈Z

By the Weierstrass M -test, the series actually converges absolutely and uniformly, since |eint | is always equal to 1. Each term of the series is continuous and has period 2π, and the sum function f inherits both these properties. Now let m be any integer (positive, negative, or zero), and multiply the series by e−imt . It will still converge uniformly, and it can be integrated term by term over a period, such as the interval (−π, π): π

−imt

f (t) e −π

dt =

π

i(n−m)t

cn e

−π n∈Z

n∈Z

But it is readily seen that

π ikt

e −π

dt =

dt =

cn

π

ei(n−m)t dt. −π

2π, k = 0, 0, k = 0.

It follows that all the terms in the sum vanish, except the one where n−m = 0, which is the same thing as n = m, and the result is that π f (t) e−imt dt = 2πcm . −π

4.1 Deﬁnitions

75

Thus, for an absolutely convergent series of the form (4.1), the coeﬃcients can be computed from the sum function using this formula. This fact can be taken as a motivation for the following deﬁnition. Deﬁnition 4.1 Let f be a function with period 2π that is absolutely Riemann-integrable over a period. Deﬁne the numbers cn , n ∈ Z, by π 1 1 cn = f (t) e−int dt = f (t) e−int dt. 2π T 2π −π These numbers are called the Fourier coeﬃcients of f , and the Fourier series of f is the series cn eint . n∈Z

Notice that the deﬁnition does not state anything about the convergence of the series, even less what its sum might be if it happens to converge. It is the main task of this chapter to investigate these questions. When dealing simultaneously with several functions and their Fourier coeﬃcients it is convenient to indicate to what function the coeﬃcients belong by writing things like cn (f ). Another commonly used way of denoting the Fourier coeﬃcients of f is f'(n). When we want to state, as a formula, that f has a certain Fourier series, we write f (t) ∼ cn eint . n∈Z

This means nothing more or less than the fact that the numbers cn are computable from f using certain integrals. There are a number of alternative ways of writing the terms in a Fourier series. For instance, when dealing with real-valued functions, the complexvalued functions eint are often felt to be rather “unnatural.” One can then write eint = cos nt + i sin nt and reshape the two terms corresponding to ±n like this: cn eint + c−n e−int = cn (cos nt + i sin nt) + c−n (cos nt − i sin nt) = (cn + c−n ) cos nt + i(cn − c−n ) sin nt = an cos nt + bn sin nt, n = 1, 2, . . . . In the special case n = 0 we have only one term, c0 . This gives a series of the form ∞ (an cos nt + bn sin nt). c0 + n=1

The coeﬃcients in this series are given by new integral formulae: 1 1 an = cn + c−n = f (t)e−int dt + f (t)eint dt 2π T 2π T

76

4. Fourier series

1 = π

f (t) T

1 int 2 (e

−int

+e

1 ) dt = π

and similarly one shows that 1 bn = f (t) sin nt dt, π T

f (t) cos nt dt,

n = 1, 2, 3, . . . ,

T

n = 1, 2, 3, . . . .

If we extend the validity of the formula for an to n = 0, we ﬁnd that a0 = 2c0 . For this reason the Fourier series is commonly written f (t) ∼

1 2 a0

+

∞

(an cos nt + bn sin nt).

(4.2)

n=1

This is sometimes called the “real” or trigonometric version of the Fourier series for f . It should be stressed that this is nothing but a diﬀerent way of writing the series — it is really the same series as in the deﬁnition. The terms in the series (4.2) can be interpreted as vibrations of diﬀerent frequencies. The constant term 12 a0 is a “DC component,” the term a1 cos t + b1 sin t has period 2π, the term with n = 2 has half the period length, for n = 3 the period is one-third of 2π, etc. These terms can be written in yet another way, that emphasizes this physical interpretation. The reader should be familiar with the fact that the sum of a cosine and a sine with the same period can always be rewritten as a single cosine (or sine) function with a phase angle: a b a cos nt + b sin nt = a2 + b2 √ cos nt + √ sin nt a2 + b2 a2 + b2 = a2 + b2 (cos α cos nt + sin α sin nt) = a2 + b2 cos(nt − α), √ 2 2 where √ the phase angle α is a number such that cos α = a/ a + b , sin α = 2 2 b/ a + b . This means that (4.2) can be written in the form ∞

An cos(nt − αn ).

(4.3)

n=0

This is sometimes called the physical version of the Fourier series. In this formula one can immediately see the amplitude An of each partial frequency. In this text, however, we shall not work with this form of the series, since it is slightly unwieldy from a mathematical point of view. When asked to compute the Fourier series of a speciﬁc function, it is normally up to the reader to choose what version to work with. This is illustrated by the following examples. Example 4.1. Deﬁne f by saying that f (t) = et for −π < t < π and f (t + 2π) = f (t) for all t. (This leaves f (t) undeﬁned for t = (2n + 1)π,

4.1 Deﬁnitions

◦

◦

◦

◦

◦ π

◦

77

10

◦

◦ −π

t

FIGURE 4.1.

but this does not matter. The value of a function at one point or another does not aﬀect the values of its Fourier coeﬃcients!) We get a function with period 2π (see Figure 4.1). Its Fourier coeﬃcients are 1 cn = 2π =

π

t −int

e e −π

1 dt = 2π

π

(1−in)t

e −π

π 1 e(1−in)t dt = 2π 1 − in t=−π

(−1)n (eπ − e−π ) (−1)n sinh π eπ−inπ − e−π+inπ = = . 2π(1 − in) 2π(1 − in) π(1 − in)

Here we used the fact that e±inπ = (−1)n . Now we can write f (t) ∼

1 (−1)n sinh π int sinh π (−1)n int e = e . π 1 − in π 1 − in n∈Z

n∈Z

We remind the reader of a couple of notions of symmetry that turn out to be useful in connection with Fourier series. A function f deﬁned on R is said to be even, if f (−t) = f (t) for all t ∈ R. A function f is odd, if f (−t) = −f (t). (The terms should bring to mind the special function f (t) = tn , which is even if n is an even integer, odd if n is an odd integer.) An odd function f on a symmetric interval (−a, a) has the property that the integral over (−a, a) is equal to zero. This has useful consequences for the so-called real Fourier coeﬃcients an and bn . If f is even and has period 2π, the sine coeﬃcients bn will be zero, and furthermore the cosine coeﬃcients will be given by the formula 2 π f even ⇒ an = f (t) cos nt dt. π 0 In an analogous way, an odd function has all cosine coeﬃcients equal to zero, and its sine coeﬃcients are given by 2 π f odd ⇒ bn = f (t) sin nt dt. π 0

78

4. Fourier series

◦

◦

◦ t

◦

◦

◦

FIGURE 4.2.

When computing the Fourier series for an even or odd function these facts are often useful. Example 4.2. Let f be an odd function with period 2π, that satisﬁes f (t) = (π − t)/2 for 0 < t < π. Find its Fourier series! (See Figure 4.2.) Solution. Notice that the description as given actually determines the function completely (except for its value at one point in each period, which does not matter). Because the function is odd we have an = 0 and 2 π π−t sin nt dt bn = π 0 2 π π 1 − cos nt 1 = (π − t) + (−1) cos nt dt π n nπ 0 t=0 π 1 1 1 = . = − 2 sin nt n n π n t=0 Thus, f (t) ∼

∞ sin nt . n n=1

Example 4.3. Let f (t) = t2 for |t| ≤ π and deﬁne f outside of this interval by proclaiming it to have period 2π (draw a picture!). Find the Fourier series of this function. Solution. Now the function is even, and so bn = 0 and n = 0 π π ↓ 2 sin nt 2 t2 t cos nt dt = − 2t sin nt dt π n nπ 0 0 0 π π − cos nt 4 4 4π cos nπ 4(−1)n t =− − 2 1 · cos nt dt = . −0= 2 nπ n n π 0 n π n2 0

2 an = π

π

2

For n = 0 we must do a separate calculation: 2π 2 2 π 2 2 π3 = . t dt = · a0 = π 0 π 3 3

4.1 Deﬁnitions

79

Collecting the results we get f (t) ∼

∞ (−1)n π2 +4 cos nt. 3 n2 n=1

The series obtained in Example 4.3 is clearly convergent; indeed it even converges uniformly, by Weierstrass. At this stage we cannot tell what its sum is. The goal of the next few sections is to investigate this. For the moment, we can notice two facts about Fourier coeﬃcients: Lemma 4.1 Suppose that f is as in the deﬁnition of Fourier series. Then 1. The sequence of Fourier coeﬃcients is bounded; more precisely, 1 |cn | ≤ |f (t)| dt for all n. 2π T 2. The Fourier coeﬃcients tend to zero as |n| → ∞. Proof. For the cn we have 1 1 −int −int ≤ 1 |cn | = f (t) e dt |f (t)||e | dt = |f (t)| dt = M, 2π 2π T 2π T T where M is a ﬁxed number that does not depend on n. (In just the same way one can estimate an and bn .) The second assertion of the lemma is just a case of Riemann–Lebesgue’s lemma. The constant term in a Fourier series is of particular interest: π a0 1 c0 = f (t) dt. = 2 2π −π This can be interpreted as the mean value of the function f over one period (or over T). This can often be useful in problem-solving. It is also intuitively reasonable in that all the other terms of the series have mean value 0 over any period (think of the graph of, say, sin nt). Exercises 4.1 Prove the formulae cn = (where b0 = 0).

1 (an 2

− ibn ) and c−n =

1 (an 2

+ ibn ) for n ≥ 0

4.2 Assume that f and g are odd functions and h is even. Find out which of the following functions are odd or even: f + g, f g, f h, f 2 , f + h. 4.3 Show that an arbitrary function f on a symmetric interval (−a, a) can be decomposed as fE + fO , where fE is even and fO is odd. Also show that this decomposition is unique. Hint: put fE (t) = (f (t) + f (−t))/2.

80

4. Fourier series

4.4 Determine the Fourier series of the 2π-periodic function described by f (t) = t + 1 for |t| < π. 4.5 Prove the following relations for a (continuous) function f and its “complex” Fourier coeﬃcients cn : (a) If f is even, then cn = c−n for all n. (b) If f is odd, then cn = −c−n for all n. (c) If f is real-valued, then cn = c−n for all n (where denotes complex conjugation). 4.6 Find the Fourier series (in the “real” version) of the functions (a) f (t) = cos 2t, (b) g(t) = cos2 t, (c) h(t) = sin3 t. Sens moral? 4.7 Let f have the Fourier coeﬃcients {cn }. Prove the following rules for Fourier coeﬃcients (F.c.’s): (a) Let a ∈ Z. Then the function t → eiat f (t) has F.c.’s {cn−a }. (b) Let b ∈ R. Then the function t → f (t − b) has F.c.’s {e−inb cn }. 4.8 Find the Fourier series of h(t) = e3it f (t − 4), when f has period 2π and satisﬁes f (t) = 1 for |t| < 2, f (t) = 0 for 2 < |t| < π. 4.9 Compute the Fourier series of f , where f (t) = e−|t| , |t| < π, f (t + 2π) = f (t), t ∈ R. 4.10 Let f and g be deﬁned on T with Fourier coeﬃcients cn (f ) resp. cn (g). Deﬁne the function h by 1 h(t) = 2π

f (t − u) g(u) du. T

Show that h is welldeﬁned on T (i.e., h has also period 2π), and prove that cn (h) = cn (f ) cn (g). (The function h is called the convolution of f and g.)

4.2 Dirichlet’s and Fej´er’s kernels; uniqueness It is a regrettable fact that a Fourier series need not be convergent. For example, it is possible to construct a continuous function such that its Fourier series diverges at a speciﬁed point (see, for example, the book by ¨ rner mentioned in the bibliography). We shall see, in due Thomas Ko time, that if we impose somewhat harder requirements on the function, such as diﬀerentiability, the results are more positive. It is, however, true that the Fourier series of a continuous function is Ces` aro summable to the values of the function, and this is the main result of this section. We start by establishing a closed formula for the partial sums of a Fourier series. To this end we shall use the following formula: Lemma 4.2 DN (u) :=

1 π

1 2

+

N n=1

cos nu

=

N sin(N + 12 )u 1 inu e = . 2π 2π sin 12 u n=−N

4.2 Dirichlet’s and Fej´er’s kernels; uniqueness

81

Proof. The equality of the two sums follows easily from Euler’s formulae. Let us then start from the “complex” version of the sum and compute it as a ﬁnite geometric sum: N

2N

1 − ei(2N +1)u 1 − eiu n=0 n=−N 1 i(N + 12 )u −i(N + 12 )u − ei(N + 2 )u e −iN u e =e · eiu/2 e−iu/2 − eiu/2

2πDN (u) =

einu = e−iN u

einu = e−iN u ·

sin(N + 12 )u e−iN u+i(N + 2 )u −2i sin(N + 12 )u · = = . 1 eiu/2 −2i sin 2 u sin 12 u 1

The function DN is called the Dirichlet kernel. Its graph is shown in Figure 4.3 on page 87. When discussing the convergence of Fourier series, the natural partial sums are those containing all frequencies up to a certain value. Thus we deﬁne the partial sum sN (t) to be 1 2

sN (t) :=

a0 +

N

(an cos nt + bn sin nt) =

n=1

N

cn eint .

n=−N

Using the Dirichlet kernel we can obtain an integral formula for this sum, assuming the cn to be the Fourier coeﬃcients of a function f : sN (t) =

N

int

cn e

=

n=−N

1 = π =

1 2π

n=−N

π

−π

N

f (u) ·

1 2

N

π

−π

f (u) e−inu du · eint

in(t−u)

e

f (t − u)

π

du =

n=−N

π

−π

1 2π

−π

f (u) DN (t − u) du

sin(N + 12 )u du. sin 12 u

In the last step we change the variable (t − u is replaced by u) and make use of the periodicity of the integrand. We shall presently take another step and form the arithmetic means of the N + 1 ﬁrst partial sums. To achieve this we need a formula for the mean of the corresponding Dirichlet kernels: Lemma 4.3 FN (u) :=

2 N sin 12 (N + 1)u 1 1 Dn (u) = . N + 1 n=0 2π(N + 1) sin 12 u

82

4. Fourier series

The proof can be done in a way similar to Lemma 4.2 (or in some other ´r kernel. way). It is left as an exercise. The function FN (t) is called the Feje Now we can form the mean of the partial sums: N s0 (t) + s1 (t) + · · · + sN (t) 1 π f (t − u) Dn (u) du = N +1 N + 1 n=0 −π π π N 1 = f (t − u) · Dn (u) du = f (t − u) FN (u) du. N + 1 n=0 −π −π

σN (t) =

Lemma 4.4 The Fej´er kernel FN (u) has the following properties: 1. FN is an even function, and FN (u) ≥ 0. π 2. −π FN (u) du = 1. π 3. If δ > 0, then limN →∞ δ FN (u) du = 0. Proof. Property 1 is obvious. Number 2 follows from π 1 π 1 Dn (u) du = 2 +cos u+· · ·+cos nu du = 1, π −π −π

n = 0, 1, 2, . . . , N,

and the fact that FN is the mean of these Dirichlet kernels. Finally, property 3 can be proved thus: π π sin2 12 (N + 1)u 1 0≤ FN (u) du = du 2π(N + 1) δ sin2 12 u δ π π−δ 1 1 Cδ 1 →0 du = = ≤ 2π(N + 1) δ sin2 12 δ 2π(N + 1) sin2 21 δ N +1 as N → ∞. ∞ The lemma implies that {FN }N =1 is a positive summation kernel such as the ones studied in Sec. 2.4. Applying Corollary 2.1 we then have the result on Ces`aro sums of Fourier series. Theorem 4.1 (Fej´ er’s theorem) If f is piecewise continuous on T and continuous at the point t, then lim σN (t) = f (t). N →∞

Remark. Using the remark following Corollary 2.1, we can sharpen the result of the theorem a bit. If f is continuous in an interval I0 =]a0 , b0 [, and I = [a, b] is a compact subinterval of I0 , then σN (t) will converge to f (t) uniformly on I.

If a series is convergent in the traditional sense, then its sum coincides with the Ces`aro limit. This means that if a continuous function happens to have a Fourier series, which is seen to be convergent, in one way or another, then it actually converges to the function it comes from. In particular we have the following theorem.

4.2 Dirichlet’s and Fej´er’s kernels; uniqueness

83

Theorem 4.2 If f is continuous on T and its Fourier coeﬃcients cn are such that |cn | is convergent, then the Fourier series is convergent with sum f (t) for all t ∈ T, and the convergence is even uniform on T. The uniform convergence follows using the Weierstrass M -test just as at the beginning of this chapter. This result can be applied to Example 4.3 of the previous section, where we computed the Fourier series of f (t) = t2 (|t| ≤ π). Applying the usual comparison test, the series obtained is easily seen to be convergent, and now we know that its sum is also equal to f (t). We now have this formula: t2 =

∞ (−1)n π2 +4 cos nt, 3 n2 n=1

−π ≤ t ≤ π.

(4.4)

(Why does this formula hold even for t = ±π ?) In particular, we can amuse ourselves by inserting various values of t just to see what we get. For t = 0 the result is ∞ π2 (−1)n 0= +4 . 3 n2 n=1 From this we can conclude that ∞ (−1)n π2 = − . n2 12 n=1

If t = π is substituted into (4.4), we have π2 =

∞ ∞ (−1)n 1 π2 π2 n +4 + 4 (−1) = , 2 3 n 3 n2 n=1 n=1

which enables us to state that ∞ 1 π2 . = n2 6 n=1

Thus, Fourier series provide a means of computing the sums of numerical series. Regrettably, it can hardly be called a “method”: if one faces a more-or-less randomly chosen series, there is no general method to ﬁnd a function whose Fourier expansion will help us to sum it. As an illustration we mention that it is rather easy to ﬁnd nice expressions for the values of ζ(s) =

∞ 1 s n n=1

for s = 2, 4, 6, . . ., but no one has so far found such an expression for, say, ζ(3). The following uniqueness result is also a consequence of Theorem 4.2.

84

4. Fourier series

Theorem 4.3 Suppose that f is piecewise continuous and that all its Fourier coeﬃcients are 0. Then f (t) = 0 at all points where f is continuous. In fact, all the partial sums are zero and the series is trivially convergent, and by Theorem 4.2 it must then converge to the function from which it is formed. Corollary 4.1 If two continuous functions f and g have the same Fourier coeﬃcients, then f = g. Proof. Apply Theorem 4.3 to the function h = f − g.

Exercises 4.11 Prove the formula for the Fej´er kernel (i.e., Lemma 4.3). 4.12 Study the function f (t) = t4 − 2π 2 t2 , |t| < π, and compute the value of ζ(4). 4.13 Determine the Fourier series of f (t) = |cos t|. Prove that the series converges uniformly to f and ﬁnd the value of s=

∞ (−1)n n=1

4n2 − 1

.

4.14 Prove converse statements to the assertions in Exercise 4.5; i.e., show that if f is continuous (say), we can say that (a) if cn = c−n for all n, then f is even; (b) If cn = −c−n for all n, then f is odd; (c) If cn = c−n for all n, then f is real-valued.

4.3 Diﬀerentiable functions Suppose that f ∈ C 1 (T), which means that both f and its derivative f are continuous on T. We compute the Fourier coeﬃcients of the derivative: 1 cn (f ) = 2π

π π 1 1 −int −int π f (t) e f (t) e dt = − f (t)(−in)e−int dt −π 2π 2π

−π

−π

1 f (π)(−1)n − f (−π)(−1)n + in cn (f ) = in cn (f ). = 2π (The fact that f is continuous on This means T implies that f (−π) = f (π).) that if f has the Fourier series cn eint , then f has the series in cn eint . This indeed means that the Fourier series can be diﬀerentiated termwise (even if we have no information at all concerning the convergence of either of the two series).

4.3 Diﬀerentiable functions

85

If f ∈ C 2 (T), the argument can be repeated, and we ﬁnd that the Fourier series of the second derivative is (−n2 )cn eint . Since the Fourier coeﬃcients of f are bounded, by Lemma 4.1, we conclude that | − n2 cn | ≤ M for some constant M , which implies that |cn | ≤ M/n2 for n = 0. But then we can use Theorem 4.2 to conclude that the Fourier series of f converges to f (t) for all t. Here we have a ﬁrst, simple, suﬃcient condition on the function f itself that ensures a nice behavior of its Fourier series. In the next section, we shall see that C 2 can be improved to C 1 and indeed even less demanding conditions. By iteration of the argument above, the following general result follows. Theorem 4.4 If f ∈ C k (T), then |cn | ≤ M/|n|k for some constant M . The smoother the function, the smaller the Fourier coeﬃcients: a function with high diﬀerentiability contains small high-frequency components. The assertion of the theorem is really rather weak. Indeed, one can say more, which is exempliﬁed in Exercises 4.15 and 4.17. The situation concerning integration of Fourier series is extremely favorable. It turns out that termwise integration is always possible, both when talking about antiderivatives and integrals over an interval. There is one complication: if the constant term in the series is not zero, the formally integrated series is no longer a Fourier series. However, we postpone the treatment of these matters until later on, when it will be easier to carry through. (Sec. 5.4, Theorem 5.9 on p. 122.) The fact that termwise diﬀerentiation is possible can be used when looking for periodic solutions of diﬀerential equations and similar problems. We give an example of this. Example 4.4. Find a solution y(t) with period 2π of the diﬀerentialdiﬀerence equation y (t) + 2y(t − π) = sin t, −∞ < t < ∞. Solution. Assume the solution to be the sum of a “complex” Fourier series (a “real” series could also be used): y(t) =

cn eint .

n∈Z

If we diﬀerentiate termwise and substitute into the given equation, we get y (t)+2y(t−π) = incn eint +2 cn eint−inπ = (in+2(−1)n )cn eint . (4.5) This should be equal to sin t = (eit − e−it )/(2i) = 21 i e−it − 12 i eit . The equality must imply that the coeﬃcients in the last series of (4.5) are zeroes for all n = ±1, and furthermore i (i − 2)c1 = − , 2

(−i − 2)c−1 =

i . 2

86

4. Fourier series

From this we solve c1 = other n), which gives

1 10 (2i

− 1), c−1 =

1 10 (−2i

− 1) (and cn = 0 for all

1 2 (eit + e−it ) + 10 i(eit − e−it ) y(t) = c1 eit + c−1 e−it = − 10 = − 15 cos t + 15 i · 2i sin t = 15 (− cos t − 2 sin t).

Check the solution by substituting into the original equation!

Exercises 4.15 Prove the following improvement on Theorem 4.4: If f ∈ C k (T), then lim nk cn = 0. n→±∞

4.16 Find the values of the constant a for which the problem y (t) + ay(t) = y(t + π), t ∈ R, has a solution with period 2π which is not identically zero. Also, determine all such solutions. 4.17 Try to prove the following partial improvements on Theorem 4.4: (a) If f is continuous and diﬀerentiable on T except possibly for a ﬁnite number of jump discontinuities, then |cn | ≤ M/|n| for some constant M . (b) If f is continuous on T and has a second derivative everywhere except possibly for a ﬁnite number of points, where there are “corners” (i.e., the left-hand and right-hand ﬁrst derivatives exist but are diﬀerent from each other), then |cn | ≤ M/n2 for some constant M .

4.4 Pointwise convergence Time is now ripe for the formulation and proof of our most general theorem on the pointwise convergence of Fourier series. We have already mentioned that continuity of the function involved is not suﬃcient. Now let us assume that f is deﬁned on T and continuous except possibly for a ﬁnite number of ﬁnite jumps. This means that f is permitted to be discontinuous at a ﬁnite number of points in each period, but at these points we assume that both the one-sided limits exist and are ﬁnite. For convenience, we introduce this notation for these limits: f (t0 −) = lim f (t), tt0

f (t0 +) = lim f (t). tt0

In addition, we assume that the “generalized left-hand derivative” fL (t0 ) exists: f (t0 + h) − f (t0 −) f (t0 − u) − f (t0 −) = lim . h0 u0 h −u

fL (t0 ) = lim

If f happens to be continuous at t0 , this coincides with the usual left-hand derivative; if f has a discontinuity at t0 , we take care to use the left-hand limit instead of just writing f (t0 ).

4.4 Pointwise convergence

87

21/(2π)

−π

π

t

FIGURE 4.3. The graph of D10

Symmetrically, we shall also assume that the “generalized right-hand derivative” exists: fR (t0 ) = lim

h0+

f (t0 + h) − f (t0 +) . h

Intuitively, the existence of these generalized derivatives amounts to the fact that at a jump discontinuity, the graphs of the two parts of the function on either side of the jump have each an end-point tangent direction. In Sec. 4.2 we proved the following formula for the partial sums of the Fourier series of f : sN (t) =

1 2π

π

−π

f (t − u)

sin(N + 12 )u du. sin 12 u

(4.6)

What complicates matters is that the Dirichlet kernel occurring in the integral is not a positive summation kernel. On the contrary, it takes a lot of negative values, which causes a proof along the lines of Theorem 2.1 to fail completely (see Figure 4.3). We shall make use of the following formula: 1 π

0

π

sin(N + 21 )u du = 1. sin 12 u

(4.7)

This follows directly from the fact that the integrated function is 2πDN (u) N = 1 + 2 1 cos nu, where all the cosine terms have integral zero over [0, π]. We split the integral (4.6) in two parts, each covering half of the interval of integration, and begin by taking care of the right-hand half:

88

4. Fourier series

Lemma 4.5 1 N →∞ π

π

lim

0

f (t0 − u)

sin(N + 12 )u du = f (t0 −). sin 12 u

Proof. Rewrite the diﬀerence between the integral on the left and the number on the right, using (4.7): 1 π

0

π

sin(N + 12 )u du − f (t0 −) sin 12 u sin(N + 12 )u 1 π (f (t0 − u) − f (t0 −)) = du π 0 sin 12 u −u 1 π f (t0 − u) − f (t0 −) · · sin(N + 12 )u du. = π 0 −u sin 12 u

f (t0 − u)

The last integrand consists of three factors: The ﬁrst one is continuous (except for jumps), and it has a ﬁnite limit as u → 0+, namely, fL (t0 ). The second factor is continuous and bounded. The product of the two ﬁrst factors is thus a function g(u) which is clearly Riemann-integrable on the interval [0, π]. By the Riemann–Lebesgue lemma we can then conclude that the whole integral tends to zero as N goes to inﬁnity, which proves the lemma. In just the same way one can prove that if f has a generalized right-hand derivative at t0 , then 1 N →∞ π

0

lim

−π

f (t0 − u)

sin(N + 12 )u du = f (t0 +). sin 12 u

Taking the arithmetic mean of the two formulae, we have proved the convergence theorem: Theorem 4.5 Suppose that f has period 2π, and suppose that t0 is a point where f has one-sided limiting values and (generalized) one-sided derivatives. Then the Fourier series of f converges for t = t0 to the mean value 1 2 (f (t0 +) + f (t0 −)). In particular, if f is continuous at t0 , the sum of the series equals f (t0 ). We emphasize that if f is continuous at t0 , the sum of the series is simply f (t0 ). At a point where the function has a jump discontinuity, the sum is instead the mean value of the right-hand and left-hand limits. It is important to realize that the convergence of a Fourier series at a particular point is really dependent only on the local behavior of the function in the neighborhood of that point. This is sometimes called the Riemann localization principle.

4.4 Pointwise convergence

89

Example 4.5. Let us return to Example 4.2 on page 78. Now we ﬁnally know that the series ∞ sin nt n=1

n

is indeed convergent for all t. If, for example, t = π/2, we have sin nt equal to zero for all even values of n, while sin(2k + 1)t = (−1)k . Since f is continuous and has a derivative at t = π/2, and f (π/2) = π/4, we obtain ∞

π (−1)k = =1− 4 2k + 1

1 3

+

1 5

−

1 7

+ ···.

k=0

(In theory, this formula could be used to compute numerical approximations to π, but the series converges so extremely slowly that it is of no practical use whatever.) The most comprehensive theorem concerning pointwise convergence of Fourier series of continuous functions was proved in 1966 by Lennart Carleson. In order to formulate it we ﬁrst introduce the notion of a zero set: a set E ⊂ T is called a zero set if, for every ε > 0, it is possible to construct a sequence of intervals {ωn }∞ n=1 on the circle, that together cover the set E and whose total length is less that ε. Theorem 4.6 (Carleson’s theorem) If f is continuous on T, then its Fourier series converges at all points of T except possibly for a zero set. In fact, it is not even necessary that f be continuous; it is suﬃcient that f ∈ L2 (T), which will be explained in Chapter 5. The proof is very complicated. Carleson’s theorem is “best possible” in the following sense: Theorem 4.7 (Kahane and Katznelson) If E is a zero set on T, then there exists a continuous function such that its Fourier series diverges precisely for all t ∈ E. Exercises 4.18 Deﬁne f by letting f (t) = t sin t for |t| < π and f (t + 2π) = f (t) for all t. Determine the Fourier series of f and investigate for which values of t it converges to f (t). 4.19 If f (t) = (t + 1) cos t for −π < t < π, what is the sum of the Fourier series of f for t = 3π? (Note that you do not have to compute the series itself!) 4.20 The function f has period 2π and satisﬁes

f (t) =

t + π, −π < t < 0, 0, 0 ≤ t ≤ π.

90

4. Fourier series (a) Find the Fourier series of f and sketch the sum of the series on the interval [−3π, 3π]. ∞ 1 . (b) Sum the series (2n − 1)2 n=1

4.21 Let f (x) be deﬁned for −π < x < π by f (x) = cos 32 x and for other values of x by f (x) = f (x + 2π). Determine the Fourier series of f . For all real x, investigate whether the series is convergent. Find its sum for x = n · π/2, n = 1, 2, 3. 4.22 Let α be a complex number but not an integer. Determine the Fourier series of cos αt (|t| ≤ π). Use the result to prove the formula π cot πz = lim

N →∞

N n=−N

1 z−n

(z ∈ / Z)

(“expansion into partial fractions of the cotangent”).

4.5 Formulae for other periods Here we have collected the formulae for Fourier series of functions with a period diﬀerent from 2π. It is convenient to have a notation for the halfperiod, so we assume that the period is 2P , where P > 0: f (t + 2P ) = f (t) for all t ∈ R. Put Ω = π/P . The number Ω could be called the fundamental angular frequency. A linear change of variable in the usual formulae results in the following set of formulae: P 1 inΩt cn e , where cn = f (t) e−inΩt dt, f (t) ∼ 2P −P n∈Z

and, alternatively, f (t) ∼

1 2

a0 +

∞

an 1 (an cos nΩt+bn sin nΩt), where b = n P n=1

P f (t)

cos nΩt dt. sin

−P

In all cases, the intervals of integration can be changed from (−P, P ) to an arbitrary interval of length 2P . If f is even or odd, we have the special cases 2 P f even ⇒ bn = 0, an = f (t) cos nΩt dt, P 0 2 P f (t) sin nΩt dt. f odd ⇒ an = 0, bn = P 0

4.6 Some worked examples

91

All results concerning summability, convergence, diﬀerentiability, etc., that we have proved in the preceding sections, will of course hold equally well for any period length. Exercises 4.23 (a) Determine the Fourier series for the even function f with period 2 that satisﬁes f (t) = t for 0 < t < 1. (b) Determine the Fourier series for the odd function f with period 2 that satisﬁes f (t) = t for 0 < t < 1. (c) Compare the convergence properties of the series obtained in (a) and (b). Illuminate by drawing pictures! 4.24 Find, in the guise of a “complex” Fourier series, a periodic solution with a continuous ﬁrst derivative on R of the diﬀerential equation y + y + y = g, where g has period 4π and g(t) = 1 for |t| < π, g(t) = 0 for π < |t| < 2π. 4.25 Determine a solution with period 2 of the diﬀerential-diﬀerence equation y (t) + y(t − 1) = cos2 πt. 4.26 Compute the Fourier series of the odd function f with period 2 that satiﬁes f (x) = x − x2 for 0 < x < 1. Use the result to ﬁnd the sum of the series ∞ (−1)n n=0

(2n + 1)3

.

4.6 Some worked examples In this section we give a few more examples of the computational work that may occur in calculating the Fourier coeﬃcients of a function. Example 4.6. Take f (t) = t cos 2t for −π < t < π, and assume f to have period 2π. First of all, we try to see if f is even or odd — indeed, it is odd. This means that it should be a good idea to compute the Fourier series in the “real” version; because all an will be zero, and bn is given by the half-range integral 2 π bn = t cos 2t sin nt dt. π 0 The computation is now greatly simpliﬁed by using the product formula sin x cos y = 12 sin(x + y) + sin(x − y) . Integrating by parts, we get 1 t sin(n + 2)t + sin(n − 2)t dt (n = 2) bn = π π 1 cos(n + 2)t cos(n − 2)t ! = t − − π n+2 n−2 0

92

4. Fourier series

1 π cos(n + 2)t cos(n − 2)t ! + dt π 0 n+2 n−2 1 (−1)n cos(n + 2)π cos(n − 2)π ! (−1)n ! =− ·π +0=− + + π n+2 n−2 n+2 n−2 2n(−1)n . =− 2 n −4 +

This computation fails for n = 2. For this n we get instead π 1 1 π 1 − cos 4t t + b2 = t(sin 4t + 0) dt = cos 4t dt π 0 π 4 4π 0 = − 14 + 0 = − 14 . Noting that b1 = − 23 , we can conveniently describe the Fourier series as f (t) ∼ − 23 sin t −

1 4

sin 2t − 2

∞ n(−1)n sin nt. n2 − 4 n=3

Example 4.7. Find the Fourier series of the odd function of period 2 that is described by f (t) = t(1 − t) for 0 ≤ t ≤ 1. Using the result, ﬁnd the value of the sum ∞ (−1)k s1 = . (2k + 1)3 k=0

Solution. Since the function is odd, we compute a sine series. The coeﬃcients are 1 4(1 − (−1)n ) bn = 2 t(1 − t) sin nπt dt = (integrations by parts) = , n3 π 3 0 which is zero for all even values of n. Writing n = 2k + 1 when n is odd, we get the series ∞ 8 sin(2k + 1)πt f (t) ∼ 3 . π (2k + 1)3 k=0

A sketch of the function shows that f is everywhere continuous and has both right- and left-hand derivatives everywhere, which permits us to replace the sign ∼ by =. In particular we note that if t = 12 , then sin(2k + 1)πt = sin(k + 12 )π = (−1)k , so that 1 4

= f ( 12 ) =

8 · s1 π3

⇒

s1 =

π3 . 32

4.7 The Gibbs phenomenon

−π

π

93

t

FIGURE 4.4.

Exercises 4.27 Find the Fourier series of f with period 1, when f (x) = x for 1 < x < 2. Indicate the sum of the series for x = 0 and x = 12 . Explain your answer! 4.28 Develop into Fourier series the function f given by x f (x) = sin , −π < x ≤ π; f (x + 2π) = f (x), x ∈ R. 2 4.29 Compute the Fourier series of period 2π for the function f (x) = (|x| − π)2 , |x| ≤ π, and use it to ﬁnd the sums ∞ (−1)n−1 n=1

n2

and

∞ 1 n=1

n2

.

4.7 The Gibbs phenomenon Let f be a function that satisﬁes the conditions for pointwise convergence of the Fourier series (Theorem 4.5) and that has a jump discontinuity at a certain point t0 . If we draw a graph of a partial sum of the series, we discover a peculiar behavior: When t approaches t0 , for example, from the left, the graph of sn (t) somehow grows restless; you might say that it prepares to take oﬀ for the jump; and when the jump is accomplished, it overshoots the mark somewhat and then calms down again. Figure 4.4 shows a typical case. This sort of behavior had already been observed during the nineteenth century by experimental physicists, and it was then believed to be due to imperfection in the measuring apparatuses. The fact that this is not so, but that we are dealing with an actual mathematical phenomenon, was proved by J. W. Gibbs, after whom the behavior has also been named. The behavior is fundamentally due to the fact that the Dirichlet kernel Dn (t) is restless near t = 0. We are going to analyze the matter in detail in one special case and then, using a simple maneuver, show that the same sort of thing occurs in the general case.

94

4. Fourier series ◦

◦

◦

◦

◦ t

π ◦

◦

◦

◦

◦

FIGURE 4.5.

Let f (t) be a so-called square-wave function with period 2π, described by f (t) = 1 for 0 < t < π, f (t) = −1 for −π < t < 0 (see Figure 4.5). Since f is odd, it has a sine series, with coeﬃcients π cos nt 2 π 2 2 − bn = sin nt dt = = (1 − (−1)n ), π 0 π n nπ 0 which is zero if n is even. Thus, f (t) ∼

∞ 4 sin 3t sin 5t 4 sin(2k + 1)t = sin t + + + ··· . π 2k + 1 π 3 5

(4.8)

k=0

Because of symmetry we can restrict our study to the interval (0, π/2). For a while we dump the factor 4/π and consider the partial sums of the series in the brackets: Sn (t) = sin t +

1 3

sin 3t +

1 5

sin 5t + · · · +

1 sin(2n + 1)t. 2n + 1

By diﬀerentiation we ﬁnd Sn (t) = cos t + cos 3t + · · · + cos(2n + 1)t =

1 2

n

ei(2k+1)t + e−i(2k+1)t

k=0

= 12 e−i(2n+1)t

2n+1 k=0

ei2kt = 12 e−i(2n+1)t

1 − ei2(2n+2)t sin 2(n + 1)t = 1 − ei2t 2 sin t

(compare the method that we used to sum Dn (t)). The last formula does not hold for t = 0, but it does hold in the half-open interval 0 < t ≤ π/2. The derivative has zeroes in this interval; they are easily found to be where 2(n+1)t = kπ or t = τk = (kπ)/((2(n+1)), k = 1, 2, . . . , n. Considering the sign of the derivative between the zeroes one realizes that these points are alternatingly maxima and minima of Sn . More precisely, since Sn (0) = 0, integration gives t sin 2(n + 1)u Sn (t) = du, 2 sin u 0 where the numerator of the integrand oscillates in a smooth fashion between the successive τk , while the denominator increases throughout the interval.

4.7 The Gibbs phenomenon

95

(t) Sn

Sn (t) π 2(n+1)

0 0

π 2(n+1)

FIGURE 4.6.

This means that the ﬁrst maximum value, for t = τ1 , is also the largest, and the oscillations in Sn then quiet down as t increases (see Figure 4.6). It follows that the maximal value of Sn (t) on ]0, π/2] is given by An = Sn (τ1 ) = Sn

π 2(n + 1)

=

n k=0

(2k + 1)π 1 sin . 2k + 1 2(n + 1)

We can interpret the last sum as a Riemann sum for a certain integral: Let tk = kπ/(n+1) and ξk = 12 (tk +tk+1 ). Then the points 0 = t0 , t1 , . . . , tn+1 = π describe a subdivision of the interval (0, π), the point ξk lies in the subinterval (xk , xk+1 ) and, in addition, ξk = (2k + 1)π/(2(n + 1)). Thus we have π n sin ξk sin x An = 12 ∆xk → 12 dx as n → ∞. ξk x 0 k=0

A more detailed scrutiny of the limit process would show that the numbers An decrease toward the limit. Now we reintroduce the factor 4/π. We have then established that the partial sums of the Fourier series (4.8) have maximum values that tend to the limit 2 π sin t dt ≈ 1.1789797, π 0 t and the maximal value of Sn (t) is taken at t = π/(2(n + 1)). On the righthand side of the maximum, the partial sums oscillate around the value 1 with a decreasing amplitude, up to the point t = π/2. Because of symmetry, the behavior to the left will be analogous. What we want to stress is the fact that the maximal oscillation does not tend to zero when more terms of the series are added; on the contrary, it stabilizes toward a value that is approximately 9 percent of the total size of the jump. The point where the maximum oscillation takes place moves indeﬁnitely closer to the point of the jump. It is even possible to prove that the Fourier series is actually uniformly convergent to 1 on intervals of the form [a, π − a], where a > 0. Now let g be any function with a jump discontinuity at t0 with the size of the jump equal to δ = g(t0 +) − g(t0 −), and assume that g satisﬁes the

96

4. Fourier series

σ15

FIGURE 4.7.

conditions of Theorem 4.5 for convergence of the Fourier series in some neighborhood of t0 . Form the function h(t) = g(t) − 12 δf (t − t0 ), where f is the square-wave function just investigated. Then, h(t0 +) = h(t0 −), so that h is actually continuous at t0 if one deﬁnes h(t0 ) in the proper way. Furthermore, h has left- and right-hand derivatives at t0 , and so the Fourier series of h will converge nicely to h in a neighborhood of t = t0 . The Fourier series of g can be written as the series of h plus some multiple of a translate of the series of f ; the former series is calm near t0 , but the latter oscillates in the manner demonstrated above. It follows that the series of g exhibits on the whole the same restlessness when we approach t0 , as does the series of f when we approach 0. The size of the maximum oscillation is also approximately 9 percent of the size of the whole jump. If a Fourier series is summed according to Ces`aro (Theorem 4.1) or Poisson–Abel (see Sec. 6.3), the Gibbs phenomenon disappears completely. Compare the graphs of s15 (t) in Figure 4.4 and σ15 (t) (for the same f ) in Figure 4.7.

4.8 *Fourier series for distributions We shall here consider the generalized functions of Sec. 2.6 and 2.7 and their Fourier series. Since the present chapter deals with objects deﬁned on T, or, equivalently, periodic phenomena, we begin by considering periodic distributions as such. In this context, the Heaviside function H is not really interesting. But we can still think of the object δa (t) as a “unit pulse” located at a point a ∈ T, having the property ϕ(t)δa (t) dt = ϕ(a) if ϕ is continuous at a. T

The periodic description of the same object consists of a so-called pulse train consisting of unit pulses at all the points a + n · 2π, n ∈ Z. As an

4.8 *Fourier series for distributions

97

object deﬁned on R, this pulse train could be described by ∞

∞

δa+2πn (t) =

n=−∞

δ(t − a − 2πn).

n=−∞

The convergence of this series is uncontroversial, because at any individual point t at most one of the terms is diﬀerent from zero. The derivatives of δa can be described using integration by parts, just as in Sec. 2.6, but now the integrals are taken over T (i.e., over one period). Because everything is periodic, the contributions at the ends of the interval will cancel: b+2π ϕ(t)δa (t) dt = ϕ(t)δa (t) − ϕ (t)δa (t) dt = −ϕ (a). T

T

b

What would be the Fourier series of these distributions? Let us ﬁrst consider δa . The natural approach is to deﬁne Fourier coeﬃcients by the formula 1 1 cn = δa (t)e−int dt = · e−ina . 2π T 2π The series then looks like this: δa (t) ∼

1 −ina int e ·e . 2π n∈Z

In particular, when a = 0, the Fourier coeﬃcients are all equal to 1/(2π), and the series is 1 int e . δ(t) ∼ 2π n∈Z

By pairing terms with the same values of |n|, we can formally rewrite this as ∞ 1 1 + δ(t) ∼ cos nt. 2π π n=1 Compare the Dirichlet kernel! We might say that δ is the limit of DN as N → ∞. These series cannot be convergent in the usual sense, since their terms do not tend to zero. But for certain values of t they can be summed according to Ces` aro. Indeed, we can use the result of Exercise 2.16 on page 22. The series for 2πδa can be written (with z = ei(t−a) )

ein(t−a) =

n∈Z

=

∞ n=0 ∞ n=0

ei(t−a)

!n +

−1

ei(t−a)

!n

n=−∞ n

z +

∞ n=1

−i(t−a)

e

!n =

∞ n=0

n

z +z

∞ n=0

zn

98

4. Fourier series

According to Exercise 2.16, both the series in the last expression can be summed (C, 1) if |z| = 1 but z = 1, which is the case if t = a, and the result will be z 1 1 − zz 1 − |z|2 1 − z + z(1 − z) = = = 0. + = 1−z 1−z |1 − z|2 |1 − z|2 |1 − z|2 If t = a, all the terms are ones, and the series diverges to inﬁnity. Thus the series behaves in a way that is most satisfactory, as it enhances our intuitive image of what δa looks like. Next we ﬁnd the Fourier series of δa . The coeﬃcients are π 1 1 d −int cn = δa (t)e−int dt = − · e 2π −π 2π dt t=a 1 in −ina −int (−ine e =− ) t=a = . 2π 2π We recognize that the rule in Sec. 4.3 for the Fourier coeﬃcients of a derivative holds true. The summation of the series i −ian int i in(t−a) ne e = ne δa (t) = 2π 2π n∈Z

n∈Z

is tougher than that of δa itself, because the terms now have moduli that even tend to inﬁnity as |n| → ∞. It can be shown, however, that for t = a the series is summable (C, 2) to 0. We give a couple of examples to illustrate the use of these series. Example 4.8. Consider the function of Example 4.2 on page 78. Its Fourier series can be written f (t) ∼

∞ sin nt 1 int = e . n 2in n=1 n =0

(Notice that the last version is correct — the minus sign in the Euler formula for sin is incorporated in the sign of the n in the coeﬃcient.) The derivative of f consists of an “ordinary” term − 12 , which takes care of the slope between the jumps, and a pulse train that on T is identiﬁed with π · δ(t). This would mean that the Fourier series of the derivative is given by 1 int e f (t) = − 12 + πδ(t) ∼ − 12 + π · 2π n∈Z

= − 12 +

1 2

n∈Z

eint =

1 2

∞ n=1

(eint + e−int ) =

∞

cos nt.

n=1

Notice that this is precisely what a formal diﬀerentiation of the original series would yield.

4.8 *Fourier series for distributions

99

Example 4.9. Find a 2π-periodic solution of the diﬀerential equation y + y = 1 + δ(t) (−π < t < π). Solution. We try a solution of the form y = cn eint . Diﬀerentiating this and expanding the right-hand member in Fourier series, we get

incn eint +

n∈Z

or c0 +

cn eint = 1 +

n∈Z

1 eint , 2π

n∈Z

(in + 1)cn eint = 1 +

n =0

1 2π

+

1 eint . 2π

n =0

Identiﬁcation of coeﬃcients yields c0 = 1 + 1/(2π) and, for n = 0, cn = 1/(2π(1 + in)). A solution should thus be given by 1 eint 1 + . y(t) ∼ 1 + 2π 2π 1 + in n =0

By a stroke of luck, it happens that this series has been almost encountered before in the text: in Example 4.1 on page 76 f. we found that (−1)n sinh π inu f (u) ∼ 1+ e , π 1 − in n =0

where f (u) = eu for −π < u < π and f has period 2π. From this we can ﬁnd that (−1)n π f (u) − 1. einu = 1 − in sinh π n =0

On the other hand, the series on the left of this equation can be rewritten, using (−1)n = einπ and letting t = π − u: eint (−1)n ein(π−u) (−1)n einu = e−inu = = . 1 − in 1 + in 1 + in 1 + in

n =0

n =0

n =0

n =0

This means that our solution can be expressed in the following way: 1 1 π 1 f (π − t) y(t) ∼ 1+ + f (u)−1 = 1+ f (u) = 1+ . 2π 2π sinh π 2 sinh π 2 sinh π In particular, y(t) = 1 +

eπ eπ−t =1+ e−t , 2 sinh π 2 sinh π

0 < t < 2π,

since this condition on t is equivalent to −π < π − t < π. At the points t = n · 2π, y(t) has an upward jump of size 1 (check this!).

100

4. Fourier series

Let us check the solution by substitution into the equation. Diﬀerentiating, we ﬁnd that y (t) contains the pulse δ(t) at the origin, and between jumps one has y (t) = −(y(t) − 1). This proves that we have indeed found a solution. Exercises 4.30 Let f be the even function with period 2π that satisﬁes f (t) = π − t for 0 ≤ t ≤ π. Determine f and f , and use the result to ﬁnd the Fourier series of f . 4.31 Let f have period 2π and satisfy

f (t) =

et , |t| < π/2, 0, π/2 < |t| < π.

Compute f − f , and then determine the Fourier series of f .

Summary of Chapter 4 Deﬁnition If f is a suﬃciently nice function deﬁned on T, we deﬁne its Fourier coefﬁcients by 1 1 cos an cn = f (t)e−int dt or = f (t) nt dt. sin b 2π T π T n The Fourier series of f is the series n∈Z

cn eint ,

resp.

1 2 a0

+

∞

(an cos nt + bn sin nt).

n=1

If f has a period other than 2π, the formulae have to be adjusted accordingly. If f is even or odd, the formulae for an and bn can be simpliﬁed. Theorem If two continuous functions f and g have the same Fourier coeﬃcients, then f = g. Theorem If f is piecewise continuous on T and continuous at the point t, then, for this value of t, its Fourier series is summable (C, 1) to the value f (t). Theorem If f is continuous on T and its Fourier coeﬃcients satisfy |cn | < ∞, then its Fourier series converges absolutely and uniformly to f (t) on all of T.

Historical notes

101

Theorem If f is diﬀerentiable on T, then the Fourier series of the derivative f can be found by termvise diﬀerentiation. Theorem If f ∈ C k (T), then its Fourier coeﬃcients satisfy |cn | ≤ M/|n|k . Theorem If f is continuous except for jump discontinuities, and if it has (generalized) one-sided derivatives at a point t, then its Fourier series for this value of t converges with the sum 12 (f (t+) + f (t−)). Formulae for Fourier series are found on page 251.

Historical notes Joseph Fourier was not the ﬁrst person to consider trigonometric series of the kind that came to bear his name. Around 1750, both Daniel Bernoulli and Leonhard Euler were busy investigating these series, but the standard of rigor in mathematics then was not suﬃcient for a real understanding of them. Part of the problem was the fact that the notion of a function had not been made precise, and diﬀerent people had diﬀerent opinions on this matter. For example, a graph pieced together as in Figure 4.2 on page 78 was not considered to represent one function but several. It was not until the times of Bernhard Riemann and Karl Weierstrass that something similar to the modern concept of a function was born. In 1822, when Fourier’s great treatise appeared, it was generally regarded as absurd that a series with terms that were smooth and nice trigonometric functions should be able to represent functions that were not everywhere diﬀerentiable, or even worse—discontinuous! The convergence theorem (Theorem 4.5) as stated in the text is a weaker version of a result by the German mathematician J. Peter Lejeune-Dirichlet ´ t Feje ´r (1880–1959) had the (1805–59). At the age of 19, the Hungarian Lipo bright idea of applying Ces` aro summation to Fourier series. In the twentieth century the really hard questions concerning the convergence of Fourier series were ﬁnally resolved, when Lennart Carleson (1928–) proved his famous Theorem 4.6. The author of this book, then a graduate student, attended the series of seminars in the fall of 1965 when Carleson step by step conquered the obstacles in his way. The ﬁnal proof consists of 23 packed pages in one of the world’s most famous mathematical journals, the Acta Mathematica.

Problems for Chapter 4 4.32 Determine the Fourier series of the following functions. Also state what is the sum of the series for all t. (a) f (t) = 2 + 7 cos 3t − 4 sin 2t, −π < t < π. (b) f (t) = |sin t|, −π < t < π.

102

4. Fourier series

(c) f (t) = (π − t)(π + t), −π < t < π. (d) f (t) = e|t| , −π < t < π. 4.33 Find the cosine series of f (t) = sin t, 0 < t < π. 4.34 Find the sine series of f (t) = cos t, 0 < t < π. Use this series to show that √ π 2 1 3 5 7 = 2 − 2 + 2 − 2 + ···. 16 2 −1 6 −1 10 − 1 14 − 1 4.35 Let f be the 2π-periodic continuation of the function H(t − a) − H(t − b), where −π < a < b < π. Find the Fourier series of f . For what values of t does it converge? Indicate its sum for for all such t ∈ [−π, π]. 4.36 Let f be given by f (x) = −1 for −1 < x < 0, f (x) = x for 0 ≤ x ≤ 1 and f (x + 2) = f (x) for all x. Compute the Fourier series of f . State the sum of this series for x = 10, x = 10.5, and x = 11. 4.37 Develop f (t) = t(t − 1), 0 < t < 1, period 1, in a Fourier series. Quote some criterion that implies that the series converges to f (t) for all values of t. 4.38 The function f is deﬁned by f (t) = t2 for 0 ≤ t ≤ 1, f (t) = 0 for 1 < t < 2 and by the statement that it has period 2. (a) Develop f in a Fourier series with period 2 and indicate the sum of the series in the interval [0, 5]. ∞ (−1)n (b) Compute the value of the sum s = . n2 n=1 4.39 Suppose that f is integrable, has period T , and Fourier series ∞

f (t) ∼

cn e2πint/T .

n=−∞

Determine the Fourier series of the so-called autocorrelation function r of f , which is deﬁned by 1 r(t) = T

T

f (t + u) f (u) du. 0

4.40 An application to sound waves: Suppose the variation in pressure, p, that 1 s (seconds), and satisﬁes causes a sound has period 262 p(t) = 1,

0 0 be given. By the deﬁnition of the Riemann integral, there exists a step function (i.e., a piecewise constant function) g such that ε2 |f (t) − g(t)| dt < . 2M T Clearly we can choose g in such a way that |g(t)| ≤ M , and then it follows that ε2 2 2 = ε2 , |f (t) − g(t)| dt ≤ 2M |f (t) − g(t)| dt ≤ 2M · f − g = 2M T T and so f − g < ε. In the next step of the proof we round oﬀ the corners of the step function g to obtain a C 2 function h such that g − h < ε. At this point, the

120

5. L2 Theory

author appeals to the reader’s willingness to accept that this is possible (see Figure 5.2). The function h has a Fourier series γn eint , where the 2 coeﬃcients satisfy |γn | ≤ C/n for some C (by Theorem 4.4), which implies that the series converges uniformly. If we take N suﬃciently large, the partial sum sN (t; h) of this series will thus satisfy ε |h(t) − sN (t; h)| < √ , 2π

t ∈ T.

From this we conclude that ε2 |h(t) − sN (t; h)|2 dt ≤ · 2π = ε2 , h − sN ( · ; h)2 = 2π T so that h−sN ( · ; h) ≤ ε. Finally, let sN be the corresponding partial sum of the Fourier series of the function f that we started with. Because of the Approximation theorem (Theorem 5.3), it is certainly true that f −sN ≤ f − sN ( · ; h). Time is now ripe for combining all our approximations in this manner: f − sN ≤ f − sN ( · ; h) = f − g + g − h + h − sN ( · ; h) ≤ f − g + g − h + h − sN ( · ; h) < ε + ε + ε = 3ε. This means that f can be approximated to within 3ε by a certain linear combination of the functions eint , and since ε can be chosen arbitrarily small we have proved the theorem. As a consequence we now have the Parseval formula and the formula for the inner product (which is also often called Parseval’s formula, sometimes qualiﬁed as the polarized Parseval formula). For the “complex” system these formulae take the form 1 1 2 2 |f (t)| dt = |cn | , f (t) g(t) dt = cn dn , 2π T 2π T n∈Z

n∈Z

and for the “real” system,

1 π

1 π

T

T

|f (t)|2 dt = 12 |a0 |2 +

f (t) g(t) dt = 12 a0 α0 +

∞

(|an |2 + |bn |2 ),

n=1 ∞

(an αn + bn βn ).

n=1

(The reader will have to ﬁgure out independently how the letters on the right correspond to the functions involved.) Example 5.10. In Sec. 4.1, we saw that the odd function f with period 2π that is described by f (t) = (π − t)/2 for 0 < t < π has Fourier series

5.4 The Fourier system is complete

121

∞

(sin nt)/n. Parseval’s formula looks like this π ∞ ∞ 1 (π − t)3 1 1 2 π (π − t)2 2 2 dt = = b = (f (t)) dt = n2 n=1 n π T π 0 4 2π −3 0 n=1 1

=

1 π2 (0 − π 3 ) = . −6π 6

This provides yet another way of ﬁnding the value of ζ(2).

Example 5.11. For f (t) = t2 on |t| ≤ π we had a0 = 2π 2 /3, an = 4(−1)n /n2 for n ≥ 1 and all bn = 0. Parseval’s formula becomes 2 2 ∞ 1 π 4 2π 1 1 t dt = 2 + 16 , π −π 3 n4 n=1 which can be solved for ζ(4) = π 4 /90. Suppose that f is deﬁned only on the interval (0, π). Then f can be extended to an odd function on (−π, π) by deﬁning f (t) = −f (−t) for −π < t < 0 (if f (0) happens to be deﬁned already, this value may have to be changed to 0, but changing the value of a function at one point does not matter when dealing with Fourier series). The extended function can be expanded in a series containing only sine terms. Since ordinary Fourier series present a complete system in L2 (−π, π), f can be approximated as closely as we want in this space by partial sums of this series. But then f is also approximated in L2 (0, π) by the same partial sums (for the square of the norm in this space is exactly one half of the norm in L2 (−π, π) for odd functions, and, for that matter, even functions). We interpret this to say that the system ψn (t) = sin nt, n ≥ 1, is a complete orthogonal system on the interval (0, π) (the orthogonality was pointed out in Example 5.9). In an analogous way, a function on (0, π) can be extended to an even function and be approximated by the partial sums of a cosine series. This shows that the orthogonal system ϕn (t) = cos nt, n ≥ 0, is also complete on (0, π). We see that a function on (0, π) can be represented by either a sine series or a cosine series, whichever is suitable, and both these series converge to the function in the norm of L2 (0, π). This turns out to be useful in applications to problems for diﬀerential equations. Remark. The reader may now be asking the question: suppose that following {cn }n∈Z is a sequence of numbers such that |cn |2 converges. Does there then exist some f ∈ L2 (T) having these numbers as its Fourier coeﬃcients? The answer is yes — provided we admit functions that are Lebesgue-measurable but not necessarily Riemann-integrable. If we do this, we actually have a bijective mapping between L2 (T) and the space l2 (Z), so that f ∈ L2 (T) corresponds to the sequence of its Fourier coeﬃcients, considered as an element of l2 (Z).

As an application of Parseval we can prove the following nice theorem.

122

5. L2 Theory

Theorem 5.9 Let f ∈ L2 (T). If the Fourier series of f is integrated term by term over a ﬁnite interval (a, b), the series obtained is convergent with b the sum a f (t) dt. Note that we do not assume that the Fourier series of f is convergent in itself! Proof. Let us ﬁrst assume that the interval (a, b) is contained within a period, for instance, −π ≤ a < b ≤ π. We deﬁne a function g on T by letting g(t) = 1 for a < t < b and 0 otherwise. We compute the Fourier coeﬃcients of g: −int b b 1 e i −inb e g'(n) = e−int dt = = − e−ina , n = 0; 2π a −2πin a 2πn b 1 b−a . g'(0) = 1 dt = 2π a 2π If now f ∼ cn eint , the polarized Parseval relation takes the form 1 i −inb b−a e f (t) g(t) dt = cn − e−ina + c0 2π T 2πn 2π n =0 1 einb − eina = + c0 (b − a) . cn 2π in n =0

b But the integral on the left is nothing but a f (t) dt divided by 2π, and the terms in the sum on the right are just what you get if you integrate cn eint from a to b. After multiplication by 2π we have the assertion for this case. If the interval (a, b) is longer than 2π, it can be subdivided into pieces, each of them shorter than 2π, and then we can use the case just proved on each piece. When the results are added, the contributions from the subdivision points will cancel (convergent series can be added termwise!), and the result follows also in the general case. If we choose a = 0 and let the upper limit of integration be variable and equal to t, the theorem gives a formula for the primitive functions (antiderivatives) of f : t eint − 1 F (t) = + c0 t + K, f (u) du + K = cn in 0 n =0

where K is some constant. We shall rewrite this constant; ﬁrst notice that, by the Cauchy–Schwarz inequality for sums, 1/2 2 1/2 1/2 1/2 |cn | π 1 f ≤ |cn |2 ≤ < ∞, 2 |n| n 2π 3 n =0

n =0

n =0

5.5 Legendre polynomials

123

which means that the series n =0 cn /(in) converges absolutely with sum equal to some number K1 . Write C = K − K1 and use the fact that convergent series can be added term by term, and we ﬁnd that F (t) =

cn eint + c0 t + C. in

n =0

This is the simplest form of the “formally” integrated Fourier series of f , and we have thus shown that this integration is permitted and indeed results in a series convergent for all t. In general, the integrated series is no longer a Fourier series; this happens only if c0 = 0, i.e., if f has mean value 0. Exercises 5.14 Using the result of Exercise 4.13 on page 84, ﬁnd the value of the sum ∞ n=1

1 . (4n2 − 1)2

5.15 We reconnect to Exercise 4.22 on page 90. By studying the series established there on the interval (0, π/2), prove the formula ∞ k=0

(−1)k π = (2k + 1)((2k + 1)2 − α2 ) 4α2

1 cos 12 απ

−1 ,

α∈ / Z.

5.16 Let f be a continuous real-valued function on 0 < x < π such that f (0) = f (π) = 0 and f ∈ L2 (0, π). π π (a) Prove that 0 (f (x))2 dx ≤ 0 (f (x))2 dx. (b) For what functions does equality hold? (Hint: extend f to an odd function on (−π, π).)

5.5 Legendre polynomials A number of “classical” ON systems in various L2 spaces consist of polynomials. Polynomials are very practical functions because their values always can be computed exactly using elementary operations (addition and multiplication), which makes them immediately accessible to computers. If you want a value of a function such as ex or cos x, the eﬀective calculation always has to be performed using some sort of approximation, and this approximation often consists of some polynomial (or a combination of polynomials). The success of such approximations depends fundamentally on the validity of the following theorem.

124

5. L2 Theory

Theorem 5.10 (The Weierstrass approximation theorem) An arbitrary continuous function f on a compact interval K can be approximated uniformly arbitrarily well by polynomials. In greater detail, the assertion is the following: If K is compact, f : K → C is continuous and ε is any positive number, then there exists a polynomial P (x) such that |f (x) − P (x)| < ε for all x ∈ K. A proof can be conducted along the following lines (which are best understood by a reader who is familiar with slightly more than the barest elements about power series expansions of analytic functions): By a linear change of variable, the interval can be assumed to be, say, K = [0, π]. On this interval, f can be represented by a cosine series (which involves, if you like, considering f to be extended to an even function). The Fej´er sums σn of this series converge uniformly to f , according to the remark following Theorem 4.1. We can then choose n to make supK |f (x) − σn (x)| < ε/2. The function σn is a ﬁnite linear combination of functions of the form cos kx. These can be developed in Maclaurin series, each converging to its cosine function uniformly on every compact set, in particular on K. Take partial sums of these series and construct a polynomial P , such that supK |σn (x) − P (x)| < ε/2. Using the triangle inequality one sees that P is a polynomial with the required property. Now we make things concrete. Let the interval be K = [−1, 1], so that we live in the space L2 (−1, 1), where the inner product is given by f, g =

1

f (x) g(x) dx. −1

If we orthogonalize the polynomials 1, x, x2 , . . . , according to the Gram– Schmidt procedure with respect to this inner product, the result is a sequence {Pn } of polynomials of degree 0, 1, 2, . . .. They are traditionally scaled by the condition Pn (1) = 1. The polynomials obtained are called Legendre polynomials. The ﬁrst few Legendre polynomials are P0 (x) = 1, P1 (x) = x, P2 (x) = 12 (3x2 − 1), P3 (x) = 12 (5x3 − 3x). We notice a few simple facts that are easily seen to be universally valid. The polynomial Pn has degree exactly n; for odd n it contains only odd powers of x and for even n only even powers of x. An arbitrary polynomial p(x) of degree n can, in a unique way, be written as a linear combination of P0 , . . . , Pn , with the coeﬃcient in front of Pn diﬀerent from zero. We illustrate this with the example p(x) = x2 + 3x: x2 + 3x = 23 (P2 (x) + 12 ) + 3P1 (x) = 23 P2 (x) + 3P1 (x) + 13 P0 (x). We saw in Sec. 5.3 that uniform convergence implies L2 -convergence on bounded intervals. By Theorem 5.10, continuous functions can be uniformly

5.5 Legendre polynomials

125

approximated by polynomials; these can be rewritten as linear combinations of Legendre polynomials, and thus a continuous function on [−1, 1] can be approximated arbitrarily well by such expressions in the sense of L2 . Just as in the proof of Theorem 5.8 it follows that the Legendre polynomials make up a complete orthogonal system in L2 (−1, 1). For historical reasons, they are not normed; instead one has Pn 2 = 2/(2n + 1) (see Exercise 5.17). The following so-called Rodrigues formula holds for the Legendre polynomials: 1 (5.4) Pn (x) = n Dn (x2 − 1)n . 2 n! Example 5.12. Find the polynomial p(x) of degree at most 4 that minimizes the value of 1 | sin πx − p(x)|2 dx. −1

Solution. By the general theory, the required polynomial can be obtained as the orthogonal projection of f (x) = sin πx onto the ﬁrst ﬁve Legendre polynomials: 4 f, Pk Pk (x). p(x) = Pk , Pk k=0

Since f is an odd function, its inner products with even functions are zero. Thus the sum reduces to just two terms: p(x) =

f, P1 f, P3 P1 (x) + P3 (x). P1 , P1 P3 , P3

The denominators are taken from a table, Pk , Pk = 2/(2k + 1), and the numerators are computed (taking advantage of symmetries): f, P1 =

1

−1

f, P3 = 2

0

(sin πx) · x dx = 2 1

3 1 2 (5x

1

x sin πx dx = 0

− 3x) sin πx dx =

2 , π

2π 2 − 30 . π3

Putting everything together, we arrive at p(x) =

315 − 15π 2 525 − 35π 2 3 x− x ≈ 2.6923x − 2.8956x3 . 3 2π 2π 3

In Figure 5.3 we can see the graphs of f and p. For comparison, we have also included the Taylor polynomial T (x) of degree 3, that approximates f (x) near x = 0. It is clear that T and p serve quite diﬀerent purposes: T is a very good approximation when we are close to the origin, but quite

126

5. L2 Theory

FIGURE 5.3. Solid line: f , dashed: p, dotted: T

worthless away from that point, whereas p is a reasonable approximation over the whole interval. We have standardized the situation in this section by choosing the interval to be (−1, 1). By a simple linear change of variable everything can be transferred to an arbitrary ﬁnite interval (a, b). Here, the polynomials Qn make up a complete orthogonal system, if we let 2x − (a + b) , Qn (x) = Pn b−a and the norm is given by Qn 2 =

a

b

|Qn (x)|2 dx =

b−a . 2n + 1

When solving problems, use the formula collection in Appendix C, page 254. Exercises 5.17 Show that the polynomials deﬁned by (5.4) are orthogonal and that Pn 2 2 = . (Hint: write down Pm , Pn , where m ≤ n, and, integrating by 2n + 1 parts, move diﬀerentiations from Pn to Pm . It is also possible to keep track of the leading coeﬃcients.)

5.6 Other classical orthogonal polynomials

127

5.18 Find the best approximations with polynomials of degree at most 3, in the sense of L2 (−1, 1), to the functions (a) H(x) (the Heaviside function), (b) 1/(1 + x2 ). Draw pictures! 5.19 Compare the result of Exercise 5.4, page 110, with what is said in the text about Legendre polynomials on an interval (a, b). 5.20 Let p0 (x) = 1, p1 (x) = x, and deﬁne pn for n ≥ 2 by the recursion formula (n + 1)pn+1 (x) = (2n + 1)x pn (x) − n pn−1 (x) for n = 1, 2, . . .. Prove that pn is the same as Pn . 5.21 *Prove that u(x) = Pn (x), as deﬁned by Rodrigues’ formula, satisﬁes the diﬀerential equation (1 − x2 )u (x) − 2x u (x) + n(n + 1) u(x) = 0.

5.6 Other classical orthogonal polynomials In this section we collect data concerning some orthogonal systems that have been studied ever since the nineteenth century, because they occur, for instance, in the study of problems for diﬀerential equations. Proofs may sometimes be supplied by an interested reader; see the exercises at the end of the section. When solving problems in the ﬁeld, a handbook containing the formulae should of course be consulted. A small collection of such formulae is found on page 254 f. First we consider the L2 space on the semi-inﬁnite interval (0, ∞) with the weight function w(x) = e−x , which means that the inner product is given by f, g =

∞

f (x) g(x) e−x dx.

0

The Laguerre polynomials Ln (x) can be deﬁned by a so-called Rodrigues formula (where D denotes diﬀerentiation with respect to x): Ln (x) =

ex n n −x . D x e n!

(5.5)

It is not hard to see that Ln is actually a polynomial of degree n; it is somewhat more laborious to check that Lm , Ln = δmn ; indeed these polynomials are not only orthogonal but even normed. See Exercises 5.22–23. Next we take the interval to be the whole axis R and the weight to be 2 w(x) = e−x . Thus the inner product is 2 f, g = f (x) g(x) e−x dx. R

The Hermite polynomials Hn (x) can be deﬁned by 2 2 Hn (x) = (−1)n ex Dn e−x .

(5.6)

128

5. L2 Theory

The facts that these functions are actually polynomials of degree equal to the index n and that they are orthogonal with respect to the considered inner product are left to the reader in Exercises√5.24–25. The polynomials are not normed; instead one has Hn 2 = n! 2n π. Finally, we return to √ a ﬁnite interval, taken to be (−1, 1), and let the weight function be 1/ 1 − x2 : f, g =

1

−1

f (x) g(x) √

dx . 1 − x2

Orthogonal polynomials are deﬁned by the formula Tn (x) = cos(n arccos x). They are called Chebyshev polynomials (which can be spelled in various ˇ ways: Cebyˇ sev, Chebyshev, Tschebyschew, Tchebycheﬀ, and Qebyxev are a few variants seen in the literature, the last one being (more or less) the original). That the formula actually deﬁnes polynomials is most easily recognized after the change of variable x = cos θ, 0 ≤ θ ≤ π, which gives the formula Tn (cos θ) = cos nθ, and it is well known that cos nθ can be expressed as a polynomial in cos θ. In the case n = 2, for example, one has cos 2θ = 2 cos2 θ − 1, which means that T2 (x) = 2x2 − 1. The orthogonality is proved by making the same change of variable in the integral Tm , Tn . One also ﬁnds that T0 2 = π and Tn 2 = π/2 for n > 0. It can be proved that the polynomials named after Laguerre, Hermite, and Chebyshev actually constitute complete orthogonal systems in their respective spaces. We round oﬀ with a couple of examples. Example 5.13. Find the polynomial p(x) of degree at most 2, that minimizes the value of the integral ∞ |x3 − p(x)|2 e−x dx. 0

Solution. The norm occurring in the problem belongs together with the Laguerre polynomials. These even happen to be orthonormal (not merely orthogonal), which means that the wanted polynomial must be p(x) = f, L0 L0 (x) + f, L1 L1 (x) + f, L2 L2 (x), where f (x) = x3 . From a handbook we fetch L0 (x) = 1, L1 (x) = 1 − x, L2 (x) = 1 − 2x + 12 x2 . When computing the inner products it is convenient ∞ to notice that 0 xn e−x dx = n!. We get

f, L0 =

0

∞

x3 e−x dx = 3! = 6,

5.6 Other classical orthogonal polynomials

f, L1 =

0

f, L2 =

0

∞

∞

129

x3 (1 − x) e−x dx = 3! − 4! = 6 − 24 = −18, x3 (1 − 2x +

1 2

x2 ) e−x dx = 3! − 2 · 4! +

1 2

· 5! = 18.

Thus, p(x) = 6L0 (x)−18L1 (x)+18L2 (x) = 6−18(1−x)+18(1−2x+ 12 x2 ) = 6 − 18x + 9x2 . √ Example 5.14. Let f (x) = 1 − x2 for |x| ≤ 1. Find the polynomial p(x), of degree at most 3, that minimizes the value of the integral 1 dx |f (x) − p(x)|2 √ . 1 − x2 −1 Solution. This inner product belongs with the Chebyshev polynomials. Because of “odd-even” symmetry, these have the property that a polynomial of even index contains only terms of even degree, and similarly for odd indices. Since f is an even function and the inner product itself has “even” symmetry, the wanted polynomial will only contain terms of even degree: p(x) =

f, T0 f, T2 T0 (x) + T2 (x). T0 , T0 T2 , T2

The data required are taken from a handbook: T0 (x) = 1, T2 (x) = 2x2 − 1, and the denominators are found above (and in the handbook), so all that remains to be computed are the numerators: 1 dx f, T0 = 2 1 − x2 · 1 · √ = 2, 1 − x2 0 1 1 dx f, T2 = 2 1 − x2 · (2x2 − 1) · √ =2 (2x2 − 1) dx = − 23 . 2 1 − x 0 0 Substituting we get p(x) =

2/3 2 1 2 ·1− (2x2 − 1) = (6 − 8x2 + 4) = (5 − 4x2 ). π π/2 3π 3π

Exercises 5.22 Show that the formula (5.5) deﬁnes a polynomial of degree n. 5.23 Show that the Laguerre polynomials are orthonormal. (Hint: the same as for Exercise 5.17.) 5.24 Show that the formula (5.6) gives a polynomial of degree n. 5.25 Show that the Hermite polynomials are orthogonal and Hn 2 = n! 2n

√

π.

130

5. L2 Theory

5.26 Expand ex/3 in a Laguerre series; i.e., determine the coeﬃcients cn in the formula ex/3 ∼ (The formula

∞ 0

∞

cn Ln (x),

x ≥ 0.

n=0

e−at tn dt = n!/an+1 may come in handy.)

2

5.27 Let f (x) = ex (H(x + 1) − H(x − 1)) Approximate f with a polynomial p(x) of degree at most 3 so as to minimize the expression

∞

2

|f (x) − p(x)|2 e−x dx.

−∞

√

5.28 Let f (t) = 1 − t2 for |t| ≤ 1. Find a polynomial p(t) of degree at most 3 that minimizes 1 dt |f (t) − p(t)|2 √ . 1 − t2 −1 5.29 Approximate f (x) = |x| on the interval (−1, 1) with a polynomial of √ degree ≤ 3, ﬁrst with the weight function 1 and secondly with weight 1/ 1 − x2 . Thirdly, do the same with weight function (1 − x2 ) (but here you’ll have to construct your own orthogonal polynomials). Compare the approximating polynomials obtained in the three cases. Draw pictures! Comment!

Summary of Chapter 5 In this chapter we studied vector spaces where the scalars are the complex numbers. Practically all results from real linear algebra remain valid in this case. The only important exception to this is the appearance of the inner product. A typical example of an inner product space is given by the set L2 (I, w), where I is an interval on the real axis and w is a weight function, i.e., a function such that w(x) > 0 on I; the inner product in L2 (I, w) is deﬁned by f, g = f (x)g(x) w(x) dx. I

With the norm deﬁned by u = u, u, a notion of distance is given by u − v. Theorem In an inner product space the inequalities |u, v| ≤ uv, u + v ≤ u + v are valid. With respect to an inner product, one deﬁnes orthogonality and orthonormal sets (or ON sets), as in the real case. Gram–Schmidt’s method can be used to construct such sets.

Summary

131

If {ϕk }N k=1 is an ON set, the orthogonal projection of a u ∈ V on to the subspace spanned by this set is the vector P (u) =

N

u, ϕk ϕk .

k=1

Theorem If {ϕ1 , ϕ2 , . . . , ϕN } is an ON basis in an N -dimensional inner product space N V , then every u ∈ V can be written as u = u, ϕj ϕj , and furthermore j=1

one has u2 =

N

|u, ϕj |2

(theorem of Pythagoras).

j=1

For the inner product of two vectors one also has the following formula: u, v =

N

u, ϕj v, ϕj .

j=1

Theorem Let {ϕk }N V and let u k=1 be an orthonormal set in an inner product space N be a vector in V . Among all the linear combinations Φ = k=1 γk ϕk , the one that minimizes the value of u − Φ is the orthogonal projection of u on to the subspace spanned by the ON set, i.e., Φ = P (u). Also, it holds that * *2 N N * * * * u, ϕk ϕk * = u2 − |u, ϕk |2 . *u − * * k=1

k=1

Theorem If {ϕk }∞ k=1 is an ON set in V and u ∈ V , then ∞

|u, ϕk |2 ≤ u2

(Bessel’s inequality).

k=1

If every element in V can be approximated arbitrarily closely by linear combinations of the elements of {ϕk }, then this set is said to be complete in V . Theorem The system {ϕk }∞ k=1 is complete in V if and only if for every u ∈ V it holds that ∞ u2 = |u, ϕk |2 k=1

(the Parseval formula or the completeness relation).

132

5. L2 Theory

Theorem ∞ If the system ∞ {ϕk }k=1 is complete in V , then every u ∈ V can be written as u *= k=1 u, ϕk ϕk where * the series converges in the sense of the norm, N * * i.e., *u − k=1 u, ϕk ϕk * → 0 as N → ∞). Theorem If the system {ϕk }∞ k=1 is complete in V , then u, v =

∞

u, ϕk v, ϕk

k=1

for all u, v ∈ V . If the set {ϕk } is not ON but merely orthogonal, all these formulae must be adjusted by dividing each occurrence of a ϕk by its norm. Theorem The two orthogonal systems {eint }n∈Z and {cos nt, n ≥ 0; sin nt, n ≥ 1} are each complete in L2 (T). As a consequence of this, Parseval’s identities hold for ordinary Fourier series (with conventional notation): 1 1 |f (t)|2 dt = |cn |2 , f (t) g(t) dt = cn dn ; 2π T 2π T n∈Z

1 π

1 π

T

T

|f (t)|2 dt = 12 |a0 |2 +

f (t) g(t) dt = 12 a0 α0 +

n∈Z

∞

(|an |2 + |bn |2 ),

n=1 ∞

(an αn + bn βn ).

n=1

Theorem The Fourier series of a function f ∈ L2 (T) can always be integrated term by term over any bounded interval (a, b). The series obtained by this operation is always convergent, regardless of the convergence of the original Fourier series. Theorem (The Weierstrass approximation theorem) An arbitrary continuous function f on a compact interval K can be approximated uniformly arbitrarily well using polynomials.

Historical notes The insight that certain notions of geometry, such as orthogonality and projections, can be fruitfully applied to sets of functions dawned upon mathematicians

Problems for Chapter 5

133

in various situations during the nineteenth century. Round the turn of the century, the Swedish mathematician Ivar Fredholm (1866–1927) treated certain problems for linear integral equations in a way that made obvious analogies with problems for systems of linear equations. Building on these ideas, the German David Hilbert (1862–1943) and the Pole Stefan Banach (1892–1945) introduced notions such as Hilbert and Banach spaces. The Lp spaces mentioned in the present text are all Banach spaces (if one uses the Lebesgue integral in the deﬁnitions); and in particular L2 spaces are Hilbert spaces. The latter spaces are inﬁnite-dimensional, complex-scalar counterparts of ordinary Euclidean spaces, with a concept of distance that is coupled to an inner product. Parseval’s formula, which can be seen as a counterpart of the theorem of Pythagoras, is named after an obscure French amateur mathematician, Marcˆnes (1755–1836). Antoine Parseval des Che Adrien-Marie Legendre (1752–1833) was an inﬂuential French mathematician who worked in many areas. Edmond Laguerre (1834-86) and Charles Hermite (1822–1901) were also French. Hermite is most famous for his proof that the number π is transcendental. Pafnuty Lvovich Chebyshev (1821–94) founded the great Russian mathematical tradition that lives on to this day.

Problems for Chapter 5 5.30 Determine the Fourier series of the function

f (x) =

Also compute the sum S =

cos x, 0 < x < π, − cos x, −π < x < 0.

∞ n=1

n2 . − 1)2

(4n2

5.31 Let f be the even function with period 2π described by f (x) = sin 32 x for 0 < x < π. Using the Fourier series of f , ﬁnd the values of the sums s1 =

∞ n=1

1 , 4n2 − 9

s2 =

∞ (−1)n n=1

4n2 − 9

,

s3 =

∞ n=1

1 . (4n2 − 9)2

5.32 Use the result of Problem 4.46 on page 103 to compute the value of ∞ n=1

1 . (2n − 1)6

5.33 Use the result of Problem 4.48 on page 103 to compute the value of ζ(8). 5.34 Find a polynomial p(x) of degree at most 1 that minimizes the integral

0

1

(p(x) − x2 )2 (1 + x) dx.

134

5. L2 Theory

5.35 Let Q be the square {(x, y) : |x| ≤ π, |y|≤ π}, and let L2 (Q) denote the set of functions f : Q → C that satisfy |f (x, y)|2 dx dy < ∞. In this Q space we deﬁne an inner product by the formula

f, g =

f (x, y) g(x, y) dx dy. Q

Deﬁne the functions ϕmn ∈ L2 (Q) by ϕmn (x, y) = ei(mx+ny) , m, n ∈ Z. Show that these functions are orthogonal with respect to ·, ·, and determine their norms in L2 (Q). 5.36 Expand the function f (x) = e−ax in a Fourier–Hermite series: f (x) ∼

∞

cn Hn (x).

n=0

5.37 Expand f (x) = x3 , x ≥ 0, in a Fourier–Laguerre series: f (x) ∼

∞

cn Ln (x).

n=0

5.38 Prove this formula for Legendre polynomials: (2n + 1)Pn (x) = Pn+1 (x) − Pn−1 (x),

n ≥ 1.

5.39 A function f (x), deﬁned on (−1, 1), can be expanded in a Fourier–Legendre series: f (x) ∼

∞

cn Pn (x).

n=0

What does the Parseval formula look like for this expansion? 5.40 Determine the distance in L2 (−1, 1) from sin πx to the subspace spanned by 1, x, x2 . (The distance is the norm of the residual.) √ 5.41 The functions 1 and 3 (2x − 1) constitute an orthogonal system in the 2 space L (0, 1). Find the linear combination of these that is the best approximation of cos x in L2 (0, 1). 5.42 f is continuous on the interval [0, 1]. Moreover,

1

f (x) xn dx = 0,

n = 0, 1, 2, . . . , .

0

Prove that f (x) = 0 for all x in [0, 1]. 5.43 Determine the coeﬃcients ak , k = 0, 1, 2, 3, so that the integral

1

|a0 + a1 x + a2 x2 + a3 x3 − x4 |2 dx

−1

is made as small as possible.

Problems for Chapter 5

135

5.44 Let f (x) = cos πx. Let V be the space of continuous functions on the interval [−1, 1] with the inner product

1

u, v =

u(x) v(x) dx. −1

M is the subspace in V consisting of polynomials of degree at most 3. Find the orthogonal projection of f onto M . 5.45 Determine the numbers a, b och c so as to make the expression

2 1 cos πx − (a + bx + cx2 ) dx 2 −1

as small as possible. 5.46 Let f (x) = sgn x = 2H(x)−1 for x ∈ R. Approximate f with a third-degree polynomial in the sense of Hermite. 5.47 Let f (x) = (1 − x2 )3/2 . Find a polynomial P (x) of degree at most 3 that minimizes 1 |f (x) − P (x)| √ dx. 1 − x2 −1

This page intentionally left blank

6 Separation of variables

6.1 The solution of Fourier’s problem We now return, at last, to the problem stated in Sec. 1.4: heat conduction in a rod of ﬁnite length, with its end points kept at temperature 0. The mathematical formulation of the problem was this: (E) (B) (I)

uxx = ut , 0 < x < π, t > 0; u(0, t) = u(π, t) = 0, t > 0; u(x, 0) = f (x),

(6.1)

0 < x < π.

We had found the following solutions of the homogeneous sub-problem consisting of the conditions (E) and (B): u(x, t) =

N

bn e−n

2

t

sin nx.

(6.2)

n=1

Then we asked two questions: can we allow N → ∞ in this sum? And can the coeﬃcients be chosen so that (I) is also satisﬁed? Now we can answer these questions. Let f (x) be the initial values for 0 < x < π. By deﬁning f (x) = −f (−x) for −π < x < 0 we get an odd function. It can be expanded in a Fourier series, which is a sine series with coeﬃcients 2 π bn = f (x) sin nx dx. π 0

138

6. Separation of variables

The coeﬃcients are bounded, |bn | ≤ M , they even tend to zero as n → ∞. This implies that the series u(x, t) =

∞

bn e−n

2

t

sin nx

(6.3)

n=1

converges very nicely as soon as t > 0. If a > 0, we can estimate the terms like this for t ≥ a : |bn e−n

2

t

sin nx| ≤ M e−n

2

a

≤ M e−na = Mn ,

and Mn is a convergent geometric series. The considered series then converges uniformly in the region t ≥ a. If it is diﬀerentiated termwise with respect to t once, or with respect to x twice, the new series are also uniformly convergent in the same region (check this!). According to the theorem on diﬀerentiation of series, the function u, deﬁned by (6.3), is diﬀerentiable to the extent needed, and since all the partial sums satisfy (E)+(B), so will the sum. To check that the initial values are right is somewhat more tricky. If f happens to be so nice that |bn | < ∞, then we are home; for in this case the series will actually converge uniformly in the closed set 0 ≤ x ≤ π, t ≥ 0, and so the sum is continuous in this set, making lim u(x, t) = u(x, 0) =

t0

∞

bn sin nx = f (x)

n=1

(cf. Theorem 4.2, page 83). This holds, say, if the odd, 2π-periodic extension of f belongs to C 2 ; it even holds under weaker assumptions, but this is harder to prove. If f ∈ L2 (0, π), we can alternatively study convergence in the L2 sense. Let vt be the restriction of u to time t, i.e., vt (x) = u(x, t), 0 < x < π (here the subscript t does not stand for a derivative). The function vt has 2 Fourier coeﬃcients bn e−n t , and by Parseval we have π ∞ ∞ π π 2 2 2 −2n2 t |vt (x)| dx = |bn | e ≤ |bn |2 = f 2 < ∞. vt = 2 n=1 2 n=1 0 Thus, vt also belongs to L2 (0, π) for each t > 0. Now we investigate what happens if t 0: f − vt 2 =

∞ 2 π |bn |2 (1 − e−n t )2 = Φ(t). 2 n=1

The series deﬁning Φ(t) converges uniformly on t ≥ 0 and its terms are continuous functions of t. Thus Φ(t) is continuous on the right for t = 0, and lim Φ(t) = Φ(0) = 0, t0

6.2 Variations on Fourier’s theme

139

which means that f − vt → 0 as t decreases to 0. The solution u thus has the L2 -limit f , which is our way of saying that π lim |u(x, t) − f (x)|2 dx = 0. t0

0

The terms of the series representing the solution consist of sine functions, multiplied by exponentially decreasing factors. The higher the frequency of the sine factor, the faster does the term containing it tend to zero – small ﬂuctuations in the temperature along the rod are faster to even out than ﬂuctuations of longer period. As time goes by, the temperature of the entire rod will approach zero – which should be expected, considering the physical experiment that we have attempted to describe with our model. Remark. For t > 0, the series in (6.3) can actually be diﬀerentiated an indeﬁnite number of times with respect to both variables. What happens to the 2 term bn e−n t sin nx when it is diﬀerentiated is that one or more factors n come out, that sin and cos may interchange and also the sign may change. But, for t ≥ a > 0, the resulting term can always be estimated by an expression of the 2 form M nP e−n t ≤ M nP e−na = Qn , and it is easy to see that Qn < ∞ (apply the ratio test). We conclude that all functions such as (6.3) are indeed of class C ∞ ; they are “inﬁnitely smooth.”

Exercises 6.1 Find the solution of Fourier’s problem when (a) f (x) = sin3 x for 0 < x < π; (b) f (x) = cos 3x for 0 < x < π. 6.2 Find a solution to the following modiﬁed Fourier problem (heat conduction in a rod of length 1; a is a positive constant): 1 uxx , 0 < x < 1, t > 0; a2 u(0, t) = u(1, t) = 0, t > 0; u(x, 0) = f (x), 0 < x < 1.

ut =

6.2 Variations on Fourier’s theme In this section we perform some slight variations on the theme that has just been concluded. Later on in the chapter we shall indicate the possibility of more far-reaching variations. Example 6.1. Let us study the problem of heat conduction in a completely isolated rod, where there is no exchange of heat with the surroundings, not even at the end points. As before, the rod is represented by the interval [0, π], and the temperature at the point x at time t is denoted by u(x, t). Within the mathematical model that gives rise to the heat equation, the ﬂow of heat is assumed to run from warmer to colder areas in such a way

140

6. Separation of variables

that the velocity of the ﬂow is proportional to the gradient of the temperature (and having the opposite direction). The mathematical formulation of the condition that no heat shall ﬂow past the end points is then that the gradient of the temperature be zero at these points; in the one-dimensional case this condition is simply ux (0, t) = ux (π, t) = 0. If the temperature of the rod at time 0 is called f (x), we have the following problem: (E) (B) (I)

0 < x < π, t > 0; uxx = ut , ux (0, t) = ux (π, t) = 0, t > 0; u(x, 0) = f (x),

(6.4)

0 < x < π.

This problem is largely similar to the previous one, and we attack it by the same means (cf. Sec. 1.4). Thus we start by looking for nontrivial solutions of the homogeneous sub-problem (E)+(B), and we try to ﬁnd solutions having the form u(x, t) = X(x)T (t). Substituting into (E) leads, just as before, to the separated conditions X (x) + λX(x) = 0,

T (t) + λT (t) = 0.

To satisfy (B) without having u identically zero we must also have X (0) = X (π) = 0. This leaves us with the following boundary value problem for X: X (x) + λX(x) = 0,

0 < x < π;

X (0) = X (π) = 0.

(6.5)

Just as in Sec. 1.4, we look through the diﬀerent cases according to the value of λ. It will be suﬃcient for us to give account of “basis vectors,” so we omit scalar factors that can always be adjoined. For all λ < 0 one ﬁnds that the only possible solution is X(x) ≡ 0 (the reader should check this). If λ = 0, the equation is X (x) = 0 with solutions X(x) = A + Bx. The boundary conditions are satisﬁed if B = 0. This means that we have the solutions X(x) = X0 (x) = A = constant. For the same value of λ, the T -equation also has the solutions T = constants; as a “basis vector” we can choose u0 (x, t) = X0 (x) T0 (t) = 12 .

(6.6)

When λ > 0 we can put λ = ω 2 with ω > 0. Thus we have X + ω 2 X = 0 with solutions X(x) = A cos ωx + B sin ωx and X (x) = −ωA sin ωx + ωB cos ωx. The condition X (0) = 0 directly gives B = 0, and then X (π) = 0 means that 0 = −ωA sin ωπ. This can be satisﬁed with A = 0 precisely if ω is a (positive) integer. Thus, for λ = n2 we have the solution X(x) = Xn (x) = cos nx and multiples of this function. The corresponding equation 2 for T is solved by Tn (t) = e−n t . In addition to (6.6), the problem (E)+(B) thus has the solutions un (x, t) = Xn (x) Tn (t) = e−n

2

t

cos nx,

n = 1, 2, 3, . . . .

6.2 Variations on Fourier’s theme

141

By homogeneity, series of the form u(x, t) =

1 2

a0 +

∞

an e−n t cos nx 2

(6.7)

n=1

are solutions of (E)+(B), provided they converge nicely enough. It remains to be seen if it is possible to choose the constants an so that (I) can be satisﬁed. Direct substitution of t = 0 in the solution would give f (x) = u(x, 0) =

1 2

a0 +

∞

an cos nx,

0 < x < π.

n=1

We can see that if f is extended to an even function on the interval (−π, π) and we let the an be the Fourier coeﬃcients of this function, then we ought to have a solution to the whole problem. And, just as in the preceding section, everything works excellently if we know, for example, that |an | < ∞. It can be noted that the solution (6.7) has the property that all terms except for the ﬁrst one tend rapidly to zero when t tends to inﬁnity. One is left with the term 12 a0 . As we have seen, this is equal to the mean value of f , and this is in accordance with the intuitive feeling for what ought to happen in the physical situation: a completely isolated rod will eventually assume a constant temperature, which is precisely the mean of the initial temperature distribution. Example 6.2. Let us now modify the original problem in a few diﬀerent ways. We let the rod be the interval (0, 2), and the end points are kept each at a constant temperature, but these are diﬀerent at the two ends. To be speciﬁc, say that u(0, t) = 2 and u(2, t) = 5. Let us take the initial temperature to be given by f (x) = 1 − x2 . The whole problem is (E) (B) (I)

uxx = ut , 0 < x < 2, t > 0; u(0, t) = 2, u(2, t) = 5, t > 0; u(x, 0) = 1 − x2 , 0 < x < 2.

(6.8)

Here, separation of variables cannot be applied directly; an important feature of that method is making use of the homogeneity of the conditions, enabling us to add solutions to each other to obtain other solutions. For this reason, we now start by homogenizing the problem in the following way. Since the boundary values are constants, independent of time, it should be possible to write u(x, t) = v(x, t) + ϕ(x), where ϕ(x) should be chosen to make v the solution of a modiﬁed problem with homogeneous boundary conditions. Substitution into (E) gives vxx (x, t) + ϕ (x) = vt (x, t),

142

6. Separation of variables

so it is desirable to have ϕ (x) = 0. If we can also achieve ϕ(0) = 2 and ϕ(2) = 5, we would get v(0, t) = v(2, t) = 0. Thus we are faced with this simple problem for an ordinary diﬀerential equation: ϕ (x) = 0; ϕ(0) = 2, ϕ(2) = 5. The unique solution is easily found to be ϕ(x) = 32 x + 2. Substituting this into the initial condition of the original problem, we have 1 − x2 = u(x, 0) = v(x, 0) + ϕ(x) = v(x, 0) +

3 2

x + 2.

We collect all the conditions to be satisﬁed by v: (E ) (B ) (I )

vxx = vt ,

0 < x < 2,

v(0, t) = 0,

v(2, t) = 0,

v(x, 0) = −x2 −

3 2

x − 1,

t > 0; t > 0;

(6.9)

0 < x < 2.

This problem is essentially of the sort considered and solved in Sec. 1.4 and 6.1. A slight diﬀerence is the fact that the length of the rod is 2 instead of π, but the only consequence of this is that the sine functions in the solution will be adapted to this interval (as in Sec. 4.5). The reader is urged to perform all the steps that lead to the following formula for “general” solutions of (E )+(B ): 2 2 ∞ nπ n π t sin x. an exp − v(x, t) = 4 2 n=1 Next, the coeﬃcients are adapted to (I ): 16(−1)n − 2 16(1 − (−1)n ) 2 2 2 3 nπ x dx = + −x − 2 x − 1) sin . an = 2 0 2 nπ n3 π 3 Finally, we put together the answer to the original problem: ∞ 16(−1)n − 2 16(1 − (−1)n ) −n2 π2 t/4 nπ 3 u(x, t) = 2 x + 2 + + x. e sin 3 π3 nπ n 2 n=1 As time goes by, the temperature along the rod will stabilize at the distribution given by the function ϕ(x). This is called the stationary distribution of the problem. Example 6.3. In our next variation we consider a rod with a built-in source of heat. The length of the rod is again π, and we assume that at the point with coordinate x there is generated an amount of heat per unit of time and unit of length along the rod, described by the function sin(x/2). It can be shown that this leads to the following modiﬁcation of the heat equation: (E)

x ut = uxx + sin , 2

0 < x < π,

t > 0.

6.2 Variations on Fourier’s theme

143

We also assume that both ends are kept at temperature 0 for t > 0 and that the initial temperature along the rod is 1: (B)

u(0, t) = u(π, t) = 0, t > 0;

(I) u(x, 0) = 1, 0 < x < π.

Here there is an inhomogeneity in the equation itself. We try to amend this by using the same trick as in Example 2: put u(x, t) = v(x, t) + ϕ(x) and substitute into (E) and (B). (Do it!) We conclude that it would be very nice to have x ϕ(0) = ϕ(π) = 0. ϕ (x) = − sin , 2 The ﬁrst condition implies that ϕ must be of the form ϕ(x) = 4 sin(x/2) + Ax+B, and the boundary conditions force us to take B = 0 and A = −4/π. As a consequence, v shall be a solution of the problem (E )

(B ) (I )

vxx = vt ,

0 < x < π,

v(0, t) = 0,

v(π, t) = 0,

t > 0; t > 0;

v(x, 0) = 1 − 4 sin(x/2) + (4x)/π,

(6.10) 0 < x < π.

The reader is asked to complete the calculations; the answer is u(x, t) = 4 sin

∞ 4 2 1 − (−1)n (4n2 − 5) −n2 t x − x+ e sin nx. 2 π π n=1 n(4n2 − 1)

Example 6.4. We leave the heat equation and turn to the wave equation. We shall solve the problem of the vibrating string. Imagine a string (a violin string or guitar string), stretched between the points 0 and π of an x-axis. The point with coordinate x at time t has a position deviating from the equilibrium by the amount u(x, t). If the string is homogeneous, its vibrations are small and considered to be at right angles to the x-axis, gravitation can be disregarded; and the units of mass, length, and time are suitably chosen, then the function u will satisfy the wave equation in the simple form uxx = utt . The fact that the string is anchored at its ends means that u(0, t) = u(π, t) = 0. At time t = 0, every point of the string is located at a certain position and has a certain speed of movement. We want to ﬁnd u(x, t) for t > 0 and all the interesting values of x. This is collected into a problem of the following appearance: (E) (B) (I1 ) (I2 )

uxx = utt , 0 < x < π, t > 0; u(0, t) = u(π, t) = 0, t > 0; u(x, 0) = f (x), 0 < x < π, ut (x, 0) = g(x), 0 < x < π;

(6.11)

Again, (E) and (B) are homogeneous conditions. The usual attempt u(x, t) = X(x) T (t) this time leads up to this set of coupled problems: X (x) + λX(x) = 0, T (t) + λT (t) = 0. X(0) = X(π) = 0;

144

6. Separation of variables

The X problem is familiar by now: it has nontrivial solutions exactly for λ = n2 (n = 1, 2, 3, . . .), viz., multiples of Xn (x) = sin nx. For these values of λ, the T problem is solved by Tn (t) = an cos nt + bn sin nt. Because of homogeneity we obtain the following solutions of the sub-problem (E)+(B): u(x, t) =

∞ n=1

Xn (x) Tn (t) =

∞

(an cos nt + bn sin nt) sin nx.

(6.12)

n=1

Letting t = 0 in order to investigate (I1 ), we get f (x) = u(x, 0) =

∞

an sin nx.

n=1

Termwise diﬀerentiation with respect to t and then substitution of t = 0 gives for the second initial condition (I2 ) that g(x) = ut (x, 0) =

∞

nbn sin nx.

n=1

Thus, if we choose an to be the sine coeﬃcients of (the odd extension of) f , and choose bn so that nbn are the corresponding coeﬃcients of g, then the series (6.12) ought to represent the wanted solution. As we saw already in Sec. 1.3, the wave equation may have rather irregular, non-smooth solutions. This is reﬂected by the fact that the series in (6.12) can converge quite “badly.” See, for example, the solution of Exercise 6.7, which is, after all, an attempt at a quite natural situation. If we allow distributions as derivatives, as indicated in Sec. 2.6–7, the mathematical troubles go away. It should also be borne in mind that the conditions of Exercise 6.7 are not physically realistic: a string does not really have thickness 0 and cannot really take on the shape of an angle. Remark. The typical term in the sum (6.12) can be rewritten in the form An sin(nt + αn ) sin nx. Its musical signiﬁcance is the nth partial tone in the sound emitted by the string. (The ﬁrst partial is often called the fundamental.) Figure 6.1 illustrates in principle the shapes of the string that correspond to diﬀerent values of n. These are also called the modes of vibrations of the string. Remark. Of considerable musical importance is the fact that the nth partial also vibrates in time with a frequency that is the nth multiple of the fundamental. This is what was noted already by Pythagoras: if the length of the string is halved (making it vibrate in the same manner as the whole string would vibrate in the second mode), one hears a note sounding one octave higher. The successive partials are illustrated in Figure 6.2. The accidental ↓ stands for lowering the pitch ↑

by slightly more than a (tempered) semi-tone, while ↓ and indicate raising the pitch by slightly less or respectively more, than a semi-tone. Partial number 7 is

6.2 Variations on Fourier’s theme

n=1

n=2

n=3

n=4

n=5

n=6

145

FIGURE 6.1.

•• 1 •

..

2

•

3

••

4

• 5

••

• ↓•

••

••

••

6

7

8

9

10

• ↓•

↑ •• •• ↓ •• ••

••

11

12

16

13

14

15

••

•• FIGURE 6.2. wellknown to musicians (especially brass players) as an ugly pitch that is to be avoided in normal music. Partials 11 and 13 are also bad approximations of the pitches indicated in the ﬁgure, but they are so high up that they cause relatively little trouble in normal playing.

We round oﬀ this section with a problem for the Laplace equation in a square. This sort of problem is called a Dirichlet problem: the Laplace equation in a region of the plane, with values prescribed on the boundary of the region. Example 6.5. Find u(x, y) that solves uxx + uyy = 0, 0 < x < π, 0 < y < π, with boundary conditions u(x, 0) = sin 3x − 3 sin 2x for 0 < x < π, u(x, π) = u(0, y) = u(π, y) = 0, 0 < x, y < π. Solution. Draw a picture! We have a homogeneous equation, (E)

uxx + uyy = 0,

together with three homogeneous boundary conditions, (B1,2,3 )

u(0, y) = u(π, y) = 0,

u(x, π) = 0,

146

6. Separation of variables

and one non-homogeneous boundary condition, (B4 )

u(x, 0) = sin 3x − 3 sin 2x.

We begin by disregarding (B4 ) and look for nontrivial functions u of the special form u(x, y) = X(x)Y (y) satisfying the homogeneous conditions. Substitution into (E) gives X (x)Y (y) + X(x)Y (y) = 0, which can be separated to look like X (x) Y (y) =− , X(x) Y (y) and by the same argument as in preceding cases we conclude that the two sides of this equation must be constant. This constant is (again by force of tradition) given the name −λ. The boundary conditions (B1,2 ) can be met by saying that X(0) = X(π) = 0, and (B3 ) by putting Y (π) = 0. We ﬁnd that we have the following couple of problems for X and Y : X (x) + λX(x) = 0 Y (y) − λY (y) = 0 X(0) = X(π) = 0 Y (π) = 0 The problem for X is, by now, wellknown. It has nontrivial solutions if and only if λ = n2 for n = 1, 2, 3, . . ., and these solutions are of the form Xn (x) = sin nx. For the same values of λ, the Y problem is solved by Yn (y) = Aeny +Be−ny , where A and B shall be chosen to meet the condition Yn (π) = 0. This is done by letting B = −Ae2nπ . We thus have the solutions un (x, y) = An eny − en(2π−y) sin nx, n = 1, 2, 3, . . . , of the homogeneous conditions (E) and (B1,2,3 ). Because of the homogeneity, sums of these solutions are again solutions. A “general” solution is given by ∞ u(x, y) = An eny − en(2π−y) sin nx. n=1

We now have to choose the coeﬃcients An to meet the remaining condition (B4 ). The reader should check the computations that lead to the ﬁnal result u(x, y) =

1 3y −3 2y e − e2(2π−y) sin 2x + e − e3(2π−y) sin 3x. 1 − e4π 1 − e6π

In the last example, the boundary condition was homogeneous on three of the edges of the square. A general Dirichlet problem for a square might be

6.2 Variations on Fourier’s theme

147

taken care of by solving four problems of this kind, with non-homogeneous boundary values on one edge at a time, and adding the solutions. In the exercises the reader will have the opportunity to apply the basic ideas of the method of separation of variables to a variety of problems. In all cases, the success of the method is coupled to the fact that one reaches a problem for an ordinary diﬀerential equation together with boundary conditions. This problem turns out to have nontrivial solutions only for certain values of the “separation constant,” and these solutions are a sort of building blocks out of which the solutions are constructed. This sort of ODE problem is called a Sturm–Liouville problem and will be considered in Sec. 6.4 for its own sake. It is even possible to treat partial diﬀerential equations with more than two independent variables in much the same way. Exercises 6.3 Find a solution of the heat problem ut = uxx for 0 < x < π, t > 0, such that ux (0, t) = ux (π, t) = 0 for t > 0 and u(x, 0) = 12 (1 + cos 3x) for 0 < x < π. 6.4 Determine a solution of the problem

uxx = t ut , 0 < x < π, t > 1; u(0, t) = u(π, t) = 0, t > 1, u(x, 1) = sin x + 2 sin 3x, 0 < x < π.

6.5 Find a solution of the non-homogeneous heat conduction problem

uxx = ut + sin x, 0 < x < π, t > 0; u(0, t) = u(π, t) = 0, t > 0; u(x, 0) = sin x + sin 2x, 0 < x < π.

6.6 Solve the following problem for the vibrating string:

uxx = utt , 0 < x < π, t > 0; u(x, 0) = 3 sin 2x, ut (x, 0) = 5 sin 3x, u(0, t) = u(π, t) = 0, t > 0.

0 < x < π;

6.7 The plucked string: a point on the string is pulled from its resting position and then released with no initial speed. If the string is plucked at its middle point, what tones are heard? In a mathematical formulation: Solve the problem (6.11), when f is given by f (x) = ax, 0 ≤ x ≤

1 2

π,

f (x) = a(π − x),

1 2

π ≤ x ≤ π,

and g(x) = 0. 6.8 Find u(x, t) if

uxx (x, t) = utt (x, t), 0 < x < 1, t > 0; u(0, t) = u(1, t) = 0, t > 0; u(x, 0) = sin 3πx, ut (x, 0) = sin πx cos2 πx,

0 < x < 1.

148

6. Separation of variables

6.9 Find a solution of the following problem (one-dimensional heat conduction with loss of heat to the surrounding medium) for h > 0 constant: ut = uxx − hu, 0 < x < π, t > 0, together with u(0, t) = 0, u(π, t) = 1 for t > 0 and u(x, 0) = 0 for 0 < x < π. 6.10 A Dirichlet problem: uxx + uyy = 0 for 0 < x, y < 1, u(x, 0) = u(x, 1) = 0, u(0, y) = 0 and u(1, y) = sin3 πy. 6.11 Find a solution u = u(x, t) of this problem:

uxx + 14 u = ut , 0 < x < π, t > 0; u(0, t) = 0, u(π, t) = 1, t > 0; u(x, 0) = 0, 0 < x < π.

6.3 The Dirichlet problem in the unit disk We shall study a problem for the Laplace equation in two dimensions. Let u = u(x, y) be a function deﬁned in an open, connected set Ω in R2 . The Laplace equation in Ω is ∆u :=

∂2u ∂2u + 2 = 0, ∂x2 ∂y

(x, y) ∈ Ω.

The solutions of this equation are called harmonic functions in Ω. The Dirichlet problem is the task of ﬁnding all such functions with prescribed values on the boundary ∂Ω. We shall study this problem in the case when Ω is the unit disk D : x2 + y 2 < 1, so that the boundary ∂Ω is the unit circle T : x2 + y 2 = 1. Concisely, the problem is ∆u(x, y) = 0, (x, y) ∈ D; u(x, y) = g(x, y) = known function, (x, y) ∈ T. (6.13) We shall describe two lines of attack: ﬁrst a method that requires knowledge of the elementary theory of analytic (or holomorphic) functions, then a diﬀerent approach involving separation of variables. Method 1. Interpret (x, y) as a complex number z = reiθ . The boundary function g can then conveniently be considered as a function of the polar coordinate θ, so that we are looking for harmonic functions u = u(z) = u(reiθ ) for r < 1 with boundary values u(eiθ ) = lim u(reiθ ) = g(θ), r1

−π < θ ≤ π.

The unit disk D is simply connected. By the theory of analytic functions, every harmonic function u in D has a conjugate-harmonic partner v such that the expression f (z) = u(z) + iv(z) is analytic in D. An analytic function in the unit disk is the sum of a power series: u(z) + iv(z) = f (z) =

∞ n=0

n

An z =

∞ n=0

An rn einθ

6.3 The Dirichlet problem in the unit disk

= =

∞ n=0 ∞

149

(Bn + iCn ) rn (cos nθ + i sin nθ) rn (Bn cos nθ − Cn sin nθ) + i(Cn cos nθ + Bn sin nθ) ,

n=0

where the An are Taylor coeﬃcients with real parts Bn and imaginary parts Cn . Taking the real part of the whole equation one sees that u(z) must be representable by a series of the form u(z) = u(reiθ ) =

∞

rn Bn cos nθ − Cn sin nθ ,

n=0

and, conversely, one realizes (by reading the equation backward) that all such represent harmonic functions (provided the corresponding series series An z n converges in D). In order to make the formula neater, we switch letters: put an = Bn and bn = −Cn for n ≥ 1, a0 = 2B0 , and note that the value of C0 is immaterial (since sin 0θ = 0 for all θ), and we get u(reiθ ) =

1 2

a0 +

∞

rn an cos nθ + bn sin nθ .

n=1

Method 2. We want to ﬁnd solutions of the Laplace equation in the region described in polar coordinates by r < 1, −π ≤ θ ≤ π. First we transform the equation into polar coordinates. Using the chain rule one ﬁnds that ∆u = 0 (for r > 0) is equivalent to ∂u ∂2u ∂ r + 2 = 0 r ∂r ∂r ∂θ (the computations required are usually carried through in calculus textbooks as examples of the chain rule). We then proceed to ﬁnd nontrivial solutions of the special form u(r, θ) = R(r) Θ(θ), i.e., solutions that are products of one function of r and one function of θ. Substitution into the equation results in dR d2 Θ ∂ r Θ(θ) + R(r) 2 = 0 r ⇐⇒ r rR Θ = −R Θ . ∂r dr dθ We divide by RΘ and get 1 Θ r rR = − . R Θ The left-hand member in this equation is independent of θ and the righthand member is independent of r. Just as in Sec. 1.4 we can conclude that

150

6. Separation of variables

both members must then be constant, and this constant value is called λ. The situation splits into the two ordinary diﬀerential equations Θ + λΘ = 0, r rR − λR = 0. In addition, there are a couple of “boundary conditions”: in order that the function u = RΘ be uniquely determined in D, the function Θ(θ) must have period 2π. Furthermore, since u shall have a ﬁnite value at the origin, we demand that R(r) have a ﬁnite limit R(0+) as r 0 . We begin with the problem for Θ: Θ (θ) + λΘ(θ) = 0, Θ(θ + 2π) = Θ(θ) for all θ. As in Sec. 1.4, we work through the cases λ < 0, λ = 0 and λ > 0. In the ﬁrst case there are no periodic solutions (except for Θ(θ) ≡ 0). In the case λ = 0, all constant functions will do: Θ0 (θ) = A0 . When λ > 0, let λ = ω 2 with ω > 0, and we ﬁnd the solutions Θω (θ) = Aω cos ωθ + Bω sin ωθ. These have period 2π precisely if ω is a positive integer: ω = n, n = 1, 2, 3, . . .. Summarizing, we have found interesting solutions of the Θ problem precisely when λ = n2 , n = 0, 1, 2, . . .. For these λ we solve the R-problem. When λ = 0, the equation becomes C r rR = 0 ⇐⇒ rR = C ⇐⇒ R = ⇐⇒ R = C ln r + D. r The value R(0+) exists only if C = 0. In this case we thus have a solution u = u0 = Θ0 (θ)R0 (r) = A0 · D = constant. For reasons that will presently become evident we denote this constant by 12 a0 . When λ = n2 with n > 0 we have a so-called Euler equation: ⇐⇒ r2 R + rR − n2 R = 0. r rR = n2 R To solve it, we change the independent variable by putting r = es , which results in d2 R − n2 R = 0, ds2 which has the solutions R = Cens + De−ns = Crn + Dr−n . We must take D = 0 to ascertain that R(0+) exists. Piecing together with Θ we arrive at the solution u(reiθ ) = un (reiθ ) = Θn (θ) Rn (r) = Cn rn (An cos nθ + Bn sin nθ) = rn (an cos nθ + bn sin nθ). The Laplace equation is homogeneous. Assuming convergence for the series, the solutions of ∆u = 0 in the unit disk should be representable by series of the form ∞ iθ 1 u(re ) = 2 a0 + rn an cos nθ + bn sin nθ . n=1

6.3 The Dirichlet problem in the unit disk

151

This is the same form for harmonic functions in D as obtained by “Method 1” above. The formal solutions that we have obtained can, of course, also be written in “complex” form. Via Euler’s formulae we ﬁnd u(r, θ) = u(reiθ ) =

cn r|n| einθ .

(6.14)

n∈Z

Notice that the exponents on r have a modulus sign. Now we turn to the boundary condition. As r 1, we wish that the values of the solution approach a prescribed function g(θ). For simplicity, we assume that g is continuous. Let the numbers cn be the Fourier coeﬃcients of g: 1 g(θ) e−inθ dθ, cn = 2π T and, using these coeﬃcients, form the function u(r, θ) as in (6.14). By Lemma 4.1, there exists a number M such that |cn | ≤ M . Using the Weierstrass M -test we can easily conclude that the series deﬁning u converges absolutely and uniformly in every inner closed circular disk r ≤ r0 , where r0 < 1, and this still holds after diﬀerentiations with respect to r as well as θ. According to the theorem on diﬀerentiation of series, termwise diﬀerentiation is thus possible, and since each term of the series satisﬁes the Laplace equation and this equation is homogeneous, the sum function u will also satisfy the same equation. Now we turn to the boundary condition. The uniform convergence in r ≤ r0 allows us to interchange the order of sum and integral in the following formula: |n| inθ |n| inθ 1 u(r, θ) = cn r e = r e g(t) e−int dt 2π T n∈Z n∈Z $ # 1 = r|n| ein(θ−t) g(t) dt. 2π T n∈Z

The sum in brackets can be computed explicitly – it is made up of two geometric series:

r|n| eins =

n∈Z

=

−1

r−n eins +

n=−∞ ∞ n −ins

r e

n=1

rn eins

n=0

+

∞

n=0 −is

rn eins =

r e−is 1 + 1 − r e−is 1 − r eis

+ 1 − re−is (1 − re )re 1 − r2 . = is 2 |1 − r e | 1 + r2 − 2r cos s is

=

∞

152

6. Separation of variables

We deﬁne the Poisson kernel to be the function 1 |n| ins 1 1 − r2 Pr (s) = P (s, r) = r e = · . 2π 2π 1 + r2 − 2r cos s n∈Z

This gives the following formula for u: Pr (θ − t) g(t) dt = Pr (t) g(θ − t) dt. u(r, θ) = T

T

The Poisson kernel has some interesting properties: 1. Pr (s) = Pr (−s) ≥ 0 for r < 1, s ∈ T. 2. T Pr (s) ds = 1 for r < 1. 3. If δ > 0, then

lim

r1

π

Pr (s) ds = 0. δ

The proofs of 1 and 2 are simple (2 follows by integrating the series term by term, which is legitimate). The property 3 can be shown thus: since Pr (s) is decreasing as s goes from 0 to π, we have Pr (s) ≤ Pr (δ) on the interval, and π π Pr (s) ds ≤ Pr (δ) ds = (π − δ)Pr (δ) → 0 as r 1. δ

δ

This sort of properties of a collection of functions should be familiar to the reader. They actually amount to the fact that Pr is a positive summation kernel of the kind studied in Sec. 2.4. The only diﬀerence is the fact that the present kernel is “numbered” by a variable r that tends to 1, instead of using an integer N tending to inﬁnity. Theorem 2.1 can be used, and we get the result that we have constructed a solution of the Dirichlet problem with boundary values g(θ) in the sense that lim u(r, θ) = g(θ)

r1

at all points θ where g is continuous. In addition, the solution is actually unique. This can be proved using a technique similar to that employed at the end of Sec. 4.2. First one proves that the problem with boundary values identically zero has only the solution identically zero, and then this is applied to the diﬀerence of two solutions corresponding to the same boundary values. Remark. We have here touched upon another method of summing series that may not convergent. It is called Poisson or Abel summation. For a numerical be ∞ series a it consists in forming the function n=0 n f (r) =

∞ n=0

an r n ,

0 < r < 1.

6.4 Sturm–Liouville problems

153

If this function exists in the interval indicated, and if it has a limit as r 1, then this limit is called the Poisson or Abel sum of the series. It can be proved that this method sums a convergent series to its ordinary sum. It is also a quite powerful method: it is stronger than Ces` aro summation in the sense that every Ces` aro summable series is also Abel summable; and there exist series summable by Abel that are not summable by Ces` aro, not even after any number of iterations.

Example 6.6. Find a solution of the Dirichlet problem in the disk having boundary values u(1, θ) = cos 4θ − 1. Express the solution in rectangular coordinates! Solution. It is immediately seen that in polar coordinates the solution must be u(r, θ) = −1 + r4 cos 4θ. We rewrite the cosine to introduce cos and sin of the single value θ: u = −1 + r4 (cos2 2θ − sin2 2θ) = −1 + r4 ((cos2 θ − sin2 θ)2 − (2 sin θ cos θ)2 ) = −1 + r4 (cos4 θ − 2 cos2 θ sin2 θ + sin4 θ − 4 sin2 θ cos2 θ) = −1 + x4 − 6x2 y 2 + y 4 . Exercises 6.12 Find a solution of the Dirichlet problem in the unit disk such that u(eiθ ) = 2 + cos 3θ + sin 4θ. 6.13 Find a solution of the same problem such that u(x, y) = x4 + y 4 for x2 + y 2 = 1. 6.14 Solve the Dirichlet problem with boundary values u(1, θ) = sin3 θ. 6.15 Perform the details of the proof of the uniqueness of the solution of Dirichlet’s problem.

6.4 Sturm–Liouville problems In our solutions of the problems in the preceding sections, a central role was played by a boundary value problem for an ordinary diﬀerential equation containing a parameter λ. This problem proved to have nontrivial solutions for certain values of λ, but these values had the character of being “exceptional”. The situation seems loosely similar to a kind of problem that the reader should have been faced with in a seemingly completely diﬀerent context, namely linear algebra: eigenvalue problems for an operator or a matrix. We shall see that this similarity is really not loose at all!

154

6. Separation of variables

We start with a few deﬁnitions. Let V be a space with an inner product ·, ·. A linear mapping A, deﬁned in some subspace DA of V and having its values in V , is called an operator on V . Notice that this deﬁnition is slightly diﬀerent from the one that is common in the case of ﬁnite-dimensional spaces: we do not demand that the domain of deﬁnition of the operator be A the entire space V . We write V ⊇ DA −→ V or A : DA → V . The image of a vector u ∈ DA is written A(u) or, mostly, simply Au. Deﬁnition 6.1 An operator A : DA → V is said to be symmetric, if Au, v = u, Av

for all u, v ∈ DA .

Example 6.7. Let V = L2 (T), DA = V ∩C 2 (T) and let A be the operator −D2 , so that Au = −u . Since u ∈ C 2 (T), the image Au is a continuous function and thus belongs to V . We have π u (x) v(x) dx = − u (x) v(x) −π + u (x) v (x) dx Au, v = − T T π = u(x) v (x) −π − u(x) v (x) dx = u, Av. T

The integrated parts are zero, because all the functions are periodic and thus have the same values at −π and π. Deﬁnition 6.2 An operator A : DA → V is said to have an eigenvalue λ, if there exists a vector u ∈ DA such that u = 0 and Au = λu. Such a vector u is called an eigenvector, more precisely, an eigenvector belonging to the eigenvalue λ. The set of eigenvectors belonging to a particular eigenvalue λ (together with the zero vector) make up the eigenspace belonging to λ. Example 6.8. We return to the situation in Example 6.7. If u(x) = a cos nx+b sin nx, where a and b are arbitrary constants and n is an integer ≥ 0, then clearly Au = n2 u. In this situation we have thus the eigenvalues λ = 0, 1, 4, 9, . . .. For λ = 0, the eigenspace has dimension 1 (it consists of the constant functions), for the other eigenvalues the dimension is 2. (The fact that this is the complete story of the eigenvalues of this operator was shown in Sec. 6.3, “Method 2.”) For symmetric operators on a ﬁnite-dimensional space there is a spectral theorem, which is a simple adjustment to the case of complex scalars of the theorem from real linear algebra: If A is a symmetric operator deﬁned on all of C n (for example), then there is an orthogonal basis for C n , consisting of eigenvectors for A. The proof of this can be performed as a replica of the corresponding proof for the real case (if anything, the complex case is rather easier to do than a purely “real” proof). In inﬁnite dimensions things are more complicated, but in many cases similar results do hold there as well. First we give a couple of simple results that do not depend on dimension.

6.4 Sturm–Liouville problems

155

Lemma 6.1 A symmetric operator has only real eigenvalues, and eigenvectors corresponding to diﬀerent eigenvalues are orthogonal. Proof. Suppose that Au = λu and Av = µv, where u = 0 and v = 0. Then we can write λu, v = λu, v = Au, v = u, Av = u, µv = µu, v.

(6.15)

First, choose v = u, so that also µ = λ, and we have that λu2 = λu2 . Because of u = 0 we conclude that λ = λ, and thus λ is real. It follows that all eigenvalues must be real. But then we can return to (6.15) with the information that µ is also real, and thus (λ − µ)u, v = 0. If now λ − µ = 0, then we must have that u, v = 0, which proves the second assertion. Regrettably, it is not easy to prove in general that there are “suﬃciently many” eigenvectors (to make it possible to construct a “basis,” as in ﬁnite dimensions). We shall here mention something about one situation where this does hold, the study of which was initiated by Sturm and Liouville during the nineteenth century. As special cases of this situation we shall recognize some of the boundary value problems studied in this text, starting in Sec. 1.4. We settle on a compact interval I = [a, b]. Let p ∈ C 1 (I) be a real-valued function such that p(a) = 0 = p(b); let q ∈ C(I) be another real-valued function; and let w ∈ C(I) be a positive function on the same interval (i.e., w(x) > 0 for x ∈ I). We are going to study the ordinary diﬀerential equation (pu ) + qu + λwu = 0 ⇐⇒ du d p(x) + q(x) u(x) + λw(x)u(x) = 0, dx dx

(E)

x ∈ I.

Here, λ is a parameter and u the “unknown” function. Furthermore, we shall consider boundary conditions, initially of the form (B)

A0 u(a) + A1 u (a) = 0,

B0 u(b) + B1 u (b) = 0.

Here, Aj and Bj are real constants such that (A0 , A1 ) = (0, 0) = (B0 , B1 ). Remark. If we take p(x) = w(x) = 1, q(x) = 0, A0 = B0 = 1 and A1 = B1 = 0, we recover the problem studied in Sec. 1.4.

The problem (E)+(B) is called a regular Sturm–Liouville problem. We introduce the space L2 (I, w), where w is the function occurring in (E). This means that we have an inner product u, v = u(x) v(x) w(x) dx. I

In particular, all functions u ∈ C(I) will belong to L2 (I, w), since the interval is compact.

156

6. Separation of variables

We deﬁne an operator A by the formula 1 (pu ) + qu , w DA = {u ∈ C 2 (I) : Au ∈ L2 (I, w) and u satisﬁes (B)}.

Au = −

Then, (E) can be written simply as Au = λu. The problem of ﬁnding nontrivial solutions of the problem (E)+(B) has been rephrased as the problem of ﬁnding eigenvectors of the operator A. (The fact that DA is a linear space is a consequence of the homogeneity of the boundary conditions.) The symmetry of A can be shown as a slightly more complicated parallel of Example 6.7 above. On the one hand, b Au, v = −

1 (pu ) + qu v w dx = − w

a

(pu ) + qu)v dx

a

b

b

(pu ) v dx −

=−

b

a

b q u v dx = − p u v a +

a

b

(p u v − q u v) dx.

a

On the other hand (using the fact that p, q and w are real-valued), b u, Av =

b b 1 (pv ) + qv w dx = − u(p v ) dx − u q v dx u· − w

a

b = − u p v a +

a

b

a

(u p v − u q v) dx.

a

We see that & % u(x) u (x) x=b b Au, v − u, Av = puv − pu v a = p(x) . v(x) v (x) x=a

But the determinant in this expression, for x = a, must be zero: indeed, we assume that both u and v satisfy the boundary condition (B) at a, which means that A0 u(a) + A1 u (a) = 0, A0 v(a) + A1 v (a) = 0. This can be considered to be a homogeneous linear system of equations with (the real numbers) A0 and A1 as unknowns, and it has a nontrivial solution (since we assume that (A0 , A1 ) = (0, 0)). Thus the determinant is zero. In the same way it follows that the determinant is zero at x = b. We conclude then that Au, v = u, Av,

6.4 Sturm–Liouville problems

157

so that A is symmetric. In this case, the symmetry is achieved by the fact that a certain substitution of values results in zero at each end of the interval. Clearly, this is not necessary. An operator can be symmetric for other reasons, too. We shall not delve deeper into this in this text, but refer the reader to texts on ordinary diﬀerential equations. For the case we have sketched above, the following result holds. Theorem 6.1 (Sturm–Liouville’s theorem) The operator A, belonging to the problem (E)+(B), has inﬁnitely many eigenvalues, which can be arranged in an increasing sequence: λ 1 < λ2 < λ3 < · · · ,

where λn → ∞ as n → ∞.

The eigenspace of each eigenvalue has dimension 1, and if ϕn is an eigenvector corresponding to λn , then {ϕn }∞ n=1 is a complete orthogonal system in L2 (I, w). This can be rewritten to refer directly to the diﬀerential equation problem: Theorem 6.2 The problem (E)+(B) has solutions for an inﬁnite number of values of the parameter λ, which can be arranged in an increasing sequence: λ 1 < λ2 < λ3 < · · · ,

where λn → ∞ as n → ∞.

For each of these values of λ, the solutions make up a one-dimensional space, and if ϕn is a non-zero solution corresponding to λn , the set {ϕn }∞ n=1 is a complete orthogonal system in L2 (I, w). Proofs can be found in texts on ordinary diﬀerential equations. It is of considerable interest that one gets a complete orthogonal system. We already know this to be true in a couple of special cases. First we have the problem u (x) + λu(x) = 0,

0 < x < π;

u(0) = u(π) = 0,

(6.16)

that we ﬁrst met already in Sec. 1.4; here the eigenfunctions are ϕn (x) = sin nx, and according to Sec. 5.4 these are complete in L2 (0, π) (with weight function 1). Secondly, we have seen this problem, treated in Example 6.1 of Sec. 6.2: u (x) + λu(x) = 0,

0 < x < π;

u (0) = u (π) = 0.

(6.17)

There we found the eigenfunctions ϕ0 (x) = 12 and ϕn (x) = cos nx, and we have seen that they are also complete in L2 (0, π).

158

6. Separation of variables

In the exercises, the reader is invited to investigate a few more problems that fall within the conditions of Theorem 6.2. If the assumptions are changed, the results may deviate from those of Theorem 6.2. We have already seen this in Examples 6.7 and 6.8 of the present section. There, we studied the operator −D2 on T, which corresponds to the problem u (x) + λu(x) = 0,

−π ≤ x ≤ π;

u(−π) = u(π),

u (−π) = u (π).

The boundary conditions are of a diﬀerent character from (B): they mean that u and u have periodic extensions with period 2π (so that they can truly be considered to be functions on the unit circle T). They are also commonly called periodic boundary conditions. (In contrast, the conditions considered in (B) are said to be separated: the values at a and b have no connection with each other.) In this case the eigenspaces (except for one) have dimension 2. If we choose orthogonal bases in each of the eigenspaces and pool all these together, the result is again a complete system in the relevant space, which is L2 (T). Yet another few examples are given in the next section. In one of these cases it happens that the function p goes to zero at the ends of the compact interval; in others the interval is no longer compact. It can be ﬁnite, but open, and one or more of the functions p, q, and w may have singularities at the ends; the interval may also be a half-axis or even the entire real line. All these situations give rise to what are known as singular Sturm–Liouville problems, and they sometimes occur when treating classical situations for partial diﬀerential equations. Exercises 6.16 Determine a complete orthogonal system in L2 (0, π) consisting of solutions of the problem u (x) + λ u(x) = 0,

0 < x < π;

u(0) = u (π) = 0.

6.17 The same problem, but with boundary conditions u(0) = u(π) + u (π) = 0. 6.18 Show that the problem

d du 1 − x2 dx dx

+√

λ u(x) = 0, 1 − x2

−1 < x < 1

has the eigenvalues λ = n2 (n = 0, 1, 2, . . .) and eigenfunctions Tn (x) = cos(n arccos x) for λ = n2 . (You are not expected to prove that these are all the eigenvalues and eigenfunctions of the problem.)

6.5 Some singular Sturm–Liouville problems

159

6.5 Some singular Sturm–Liouville problems Some celebrated problems in classical physics lead up to problems for ordinary diﬀerential equations that are similar to the problems considered in the preceding section. We review some of these problems here, partly because of their historical interest, but also because they have solutions that are polynomials that we met in Sec. 5.5–6. The Legendre polynomials are solutions of the following singular Sturm– Liouville problem. Let I = [−1, 1] and study the problem d (1 − x2 ) u (x) + λ u(x) = 0, dx

−1 < x < 1,

with no boundary conditions at all (except that u(x) should be deﬁned in the closed interval). Here we can identify p(x) = 1 − x2 , q(x) = 0 and w(x) = 1. Since p(x) = 0 at both ends of the interval, the corresponding operator A will be symmetric if one takes DA = {u ∈ C 2 (I) : Au ∈ L2 (I)} (the reader should check this, which is not diﬃcult). It can be proved that this problem has eigenvalues λ = n(n + 1), n = 0, 1, 2, . . ., and that the eigenfunctions are actually (multiples of) the Legendre polynomials. Remark. The origin of this problem is the three-dimensional Laplace equation in spherical coordinates (r, θ, φ), deﬁned implicitly by

r ≥ 0, 0 ≤ φ ≤ π, −π < θ ≤ π.

x = r sin φ cos θ y = r sin φ sin θ z = r cos φ

In these coordinates, the equation takes the form ∆u ≡

∂2u 2 ∂u ∂2u cot φ ∂u 1 ∂2u 1 + + 2 + 2 = 0. + 2 2 2 2 ∂r r ∂r r ∂φ r ∂φ r sin φ ∂θ2

This can also be written as

r ru

rr

+

1 1 uθθ = 0. sin φ uφ φ + sin φ sin2 φ

(6.18)

A function f (x, y, z) is said to be homogeneous of degree n, if f (tx, ty, tz) = tn f (x, y, z) for t > 0. This means that f is completely determined by its values on, say, the unit sphere, so that it can be written f (x, y, z) = rn g(φ, θ) for a certain function g. We now look for solutions un of (6.18) that are homogeneous of degree n; these solutions are called spherical harmonics. Write un (x, y, z) = rn Sn (φ, θ), where Sn is called a spherical surface harmonic. Substitution into (6.18) and subsequent division by rn gives (n + 1)nSn +

1 ∂ ∂Sn sin φ sin φ ∂φ ∂φ

! +

1 ∂ 2 Sn = 0. sin2 φ ∂θ2

160

6. Separation of variables

Now we specialize once more and restrict ourselves to solutions Sn that are independent of θ; denote them by Zn (φ). The equation reduces to (n + 1)nZn +

1 d dZn sin φ sin φ dφ dφ

! = 0.

(6.19)

Finally, we put x = cos φ and Pn (x) = Zn (φ). The reader is asked (in Exercise 6.19) to check that the equation ends up as (1 − x2 )P (x) − 2xP (x) + n(n + 1)Pn (x) = 0. This is the Legendre equation.

(6.20)

The Laguerre polynomials are solutions of the following singular Sturm– Liouville problem. Take I = [0, ∞[, p(x) = x e−x , q(x) = 0 and w(x) = e−x . The diﬀerential equation is d −x x e u (x) + λ e−x u(x) = 0 ⇐⇒ dx x u (x) + (1 − x) u (x) + λ u(x) = 0, x ≥ 0, and the “boundary conditions” are that u(0) shall exist (of course) and that u(x)/xm shall tend to 0 as x → ∞ for some number m. (The latter condition can be phrased thus: u(x) is majorized by some power of x, as x → ∞, or u(x) “increases at most like a polynomial”.) The eigenvalues of this problem are λ = n = 0, 1, 2, . . ., and the Laguerre polynomials Ln are eigenfunctions. The Hermite polynomials come from the following singular Sturm–Liouville problem. On I = R one studies the equation 2 d −x2 e u (x) + λ e−x u(x) = 0 dx

with the “boundary condition” that the solutions are to satisfy u(x)/xm → 0 as |x| → ∞ for some m > 0. Eigenvalues are the numbers λ = 2n, n = 0, 1, 2, . . . and the Hermite polynomials Hn are eigenfunctions. Exercise 6.19 Check that the change of variable x = cos φ does transform the equation (6.19) into (6.20).

Summary of Chapter 6 The Method of Separation of Variables Given a linear partial diﬀerential equation of order 2, with independent variables (x, y) and unknown function u(x, y), together with boundary and/or initial conditions—

Historical notes

161

1. If necessary (and possible), homogenize the equation and as many as possible of the other conditions. 2. Look for solutions of the homogeneous sub-problem having the particular form u(x, y) = X(x)Y (y). This normally leads to a Sturm– Liouville problem, and the result should be a sequence of solutions un = un (x, y) = Xn (x)Yn (y), n = 1, 2, 3, . . .. 3. The homogeneous problem has the “general” solution u = cn un , where the cn are constants. 4. Adapt the constants cn to make the solutions satisfy also the nonhomogeneous conditions. 5. If you began by homogenizing the problem, don’t forget to re-adapt the solution to suit the original problem. Deﬁnition Assume p, q real, w > 0 on an interval I = [a, b]. Then the following is a regular Sturm–Liouville problem on I: (pu ) + qu + λwu = 0 A0 u(a) + A1 u (a) = 0, B0 u(b) + B1 u (b) = 0 With the Sturm–Liouville problem we associate the operator A, deﬁned for functions u that satisfy the boundary conditions by the formula Au = −

1 (pu ) + qu . w

Theorem (The Sturm–Liouville theorem) The operator A, belonging to the Sturm– Liouville problem, has inﬁnitely many eigenvalues, which can be arranged in an increasing sequence: λ 1 < λ2 < λ3 < · · · ,

where λn → ∞ as n → ∞.

The eigenspace of each eigenvalue has dimension 1, and if ϕn is an eigenvector corresponding to λn , then {ϕn }∞ n=1 is a complete orthogonal system in L2 (I, w). Formulae for orthogonal polynomials are found on page 254 f.

Historical notes Jacques Charles Franc ¸ ois Sturm (1803–55) and Joseph Liouville (1809– 82) both worked in Paris. Sturm was chieﬂy concerned with diﬀerential equations; Liouville also did remarkable work in the ﬁeld of analytic functions and the theory of numbers.

162

6. Separation of variables

Problems for Chapter 6 6.20 Using separation of variables, solve the problem ut = uxx , 0 < x < 1, t > 0; u(0, t) = 1, u(1, t) = 3, u(x, 0) = 2x + 1 − sin 2πx.

uxx = utt + 2ut ,

6.21 Find a solution of the problem

0 < x < π, t > 0;

u(0, t) = u(π, t) = 0, t > 0; u(x, 0) = 0, ut (x, 0) = sin3 x, 0 < x < π.

6.22 Find a solution of the diﬀerential equation uxx = ut + u, 0 < x < π, t > 0, that satisﬁes the boundary conditions u(0, t) = u(π, t) = 0, t > 0, and u(x, 0) = x(π − x), 0 < x < π. 6.23 Find a function u(x, t) such that

ut = 4uxx ,

u(0, t) = 10,

0 < x < 4,

t > 0;

u(4, t) = 50,

u(x, 0) = 30,

t > 0;

0 < x < 4.

6.24 Find a solution of the following problem:

uxx = utt ,

0 < x < π, t > 0;

u(0, t) = u(π, t) = 0,

u(x, 0) = x(π − x), ut (x, 0) = sin 2x,

t > 0; 0 < x < π;

0 < x < π.

6.25 Determine a solution of the boundary value problem

uxx + uyy = x,

0 < x < 1, 0 < y < 1;

u(x, 0) = u(x, 1) = 0, 0 < x < 1; u(0, y) = u(1, y) = 0, 0 < y < 1.

6.26 Find a solution in the form of a series to the Dirichlet problem

uxx + uyy = 0,

x2 + y 2 < 1;

u(x, y) = |x|,

x2 + y 2 = 1.

6.27 Solve the following problem for the two-dimensional Laplace equation

uxx + uyy = 0,

0 < x < π, 0 < y < π;

ux (0, y) = ux (π, y) = 0, u(x, 0) = sin2 x,

0 < y < π;

u(x, π) = 0,

0 < x < π.

6.28 Find a function u(x, t) such that ut = uxx + cos x,

0 < x < π, t > 0;

ux (0, t) = ux (π, t) = 0, t > 0;

u(x, 0) = cos2 x + 2 cos4 x,

0 < x < π.

Problems for Chapter 6

163

6.29 Solve the following problem for a modiﬁed wave equation: uxx = utt + 2ut , 0 < x < π, t > 0; u(0, t) = u(π, t) = 0, t > 0, u(x, 0) = sin x + sin 3x, ut (x, 0) = 0, 0 < x < π. 6.30 Find u = u(x, t) that satisﬁes the equation uxx = ut + tu, 0 < x < π, t > 0, with boundary conditions u(0, t) = u(π, t) = 0 for t > 0 and initial condition u(x, 0) = sin 2x, 0 < x < π. 6.31 Find a bounded solution of the problem for a vibrating beam:

utt + uxxxx = 0,

0 < x < π, t > 0;

u(0, t) = u(π, t) = uxx (0, t) = uxx (π, t) = 0, u(x, 0) = x(π − x),

ut (x, 0) = 0,

t > 0;

0 < x < π.

6.32 A (very much) simpliﬁed model of a nuclear reactor is given by the problem

ut = Auxx + Bu,

0 < x < l, t > 0;

u(0, t) = u(l, t) = 0,

t > 0.

Here, u is the concentration of neutrons, while A and B are positive constants. The term Auxx describes the scattering of neutrons by diﬀusion, and the term Bu the creation of neutrons through ﬁssion. Prove that there is a critical value L of the length l such that if l > L, then there exist unbounded solutions; whereas if l < L, then all solutions are bounded. 6.33 In order to get good tone quality from a piano, it is desirable to have vibrations rich in overtones. An exception is the seventh partial, which results in musical dissonance, and should thus be kept low. Under certain idealizations the vibrations of a piano string are described by

utt = uxx ,

0 < x < π, t > 0;

u(0, t) = u(π, t) = 0,

u(x, 0) = 0,

t > 0;

ut (x, 0) =

1/h, for a < x < a + h, 0

otherwise.

Here a describes the point of impact of the hammer; and h, the width of the hammer, is a small number. (a) In the form of a series, compute the limit of u(x, t) as h 0. (b) Where should the point a be located so as to eliminate the seventh partial tone? There are a number of possible answers. Which would you choose? Explain why!

This page intentionally left blank

7 Fourier transforms

7.1 Introduction Suppose that f is piecewise continuous on [−P, P ] (and periodic with period 2P ). For the “complex” Fourier series of f we have ∞

f (t) ∼

n=−∞

where cn =

1 2P

cn exp in

π ! t , P

P

−P

f (t) exp −in

(7.1)

π ! t dt. P

(7.2)

One might say that f is represented by a (formal) sum of oscillations with frequencies nπ/P and complex amplitudes cn . Now imagine that P → ∞, and we want to ﬁnd a corresponding representation of functions deﬁned on the whole real axis (without being periodic). We deﬁne, provisionally, P ' f (P, ω) = f (t) e−iωt dt, ω ∈ R, (7.3) −P

so that cn = f (t) ∼

1 ' f (P, nπ/P ). The formula (7.1) is translated into 2P

∞ ∞ 1 ' π 1 ' f (P, ωn ) eiωn t = f (P, ωn ) eiωn t · , 2P n=−∞ 2π n=−∞ P

ωn =

nπ . P (7.4)

166

7. Fourier transforms

π , this last sum looks rather like a P Riemann sum. Now we let P → ∞ in (7.3) and deﬁne ∞ f'(ω) = lim f'(P, ω) = f (t) e−iωt dt, ω ∈ R (7.5)

Because of ∆ωn = ωn+1 − ωn =

P →∞

−∞

(at this point we disregard all details concerning convergence). If (7.4) had contained f'(ωn ) instead of f'(P, ωn ), the limiting process P → ∞ would have resulted in ∞ 1 f (t) ∼ (7.6) f'(ω) eiωt dω. 2π −∞ The formula couple (7.5) + (7.6) actually will prove to be the desired counterpart of Fourier series for functions deﬁned on all of R. Our strategy will be the following. Placing suitable conditions on f , we let (7.5) deﬁne a new function f', called the Fourier transform of f . We then investigate the properties of f' and show that the formula (7.6) with a suitable interpretation (and under certain additional conditions on f ) constitutes a means of recovering f from f'. Loosely speaking this means that while a function deﬁned on a ﬁnite interval (such as (−P, P )) can be constructed as a sum of harmonic oscillations with discrete frequencies {ωn = nπ/P : n ∈ Z}, a function on the inﬁnite interval ] − ∞, ∞[ demands a continuous frequency spectrum {ω : ω ∈ R}, and the sum is replaced by an integral.

7.2 Deﬁnition of the Fourier transform Assume that f is a function on R, such that the (improper) integral ∞ |f (t)| dt = |f (t)| dt (7.7) −∞

R

is convergent; using the notation introduced in Chapter 5, this is the same as saying that f ∈ L1 (R). In practice we shall only encounter functions that are piecewise continuous, i.e., they are continuous apart from possibly a ﬁnite number of ﬁnite jumps in every ﬁnite sub-interval of R. For such an f , the following integral converges absolutely, and for every real ω its value is some complex number: ' f (ω) = f (t)e−iωt dt. (7.8) R

Deﬁnition 7.1 The function f', deﬁned by (7.8), is called the Fourier transform or Fourier integral of f .

7.2 Deﬁnition of the Fourier transform

167

Common notations, besides f', are F[f ] and F (“capital letter = the transform of lower-case letter”). In this connection, it is useful to work on two distinct real axes: one where f is deﬁned, and the variable is called such things as t, x, y; and one where the transforms live and the variable is ' ω, ξ, λ, etc. We denote the former axis by R and the latter by R. Example 7.1. If f (t) = e−|t| , t ∈ R, then f ∈ L1 (R), and ∞ 0 e−|t| e−iωt dt = e−(1+iω)t dt + e(1−iω)t dt f'(ω) = 0

R

−∞

1 1 2 + = , = 1 + iω 1 − iω 1 + ω2 which can be summarized in the formula F[e−|t| ](ω) =

2 . 1 + ω2

Example 7.2. Let f (t) = 1 for |t| < 1, = 0 for |t| > 1 (i.e., f (t) = H(t + 1) − H(t − 1), where H is the Heaviside function as in Sec. 2.6). Then clearly f ∈ L1 (R), and −iωt 1 1 2 sin ω e 2 eiω − e−iω −iωt ' f (ω) = = , ω = 0. e dt = = · −iω ω 2i ω −1 −1 For ω = 0 one has e−iωt = 1, so that f'(0) = 2 = lim f'(ω). ω→0

The fact noticed at the end of the last example is not accidental. It is a case of (b) in the following theorem. Theorem 7.1 If f ∈ L1 (R), the following holds for the Fourier transform f': ' ' (a) f is bounded; more precisely, |f (ω)| ≤ |f (t)| dt. (b) (c)

' f' is continuous on R. ' lim f (ω) = 0.

R

ω→±∞

Proof. (a) follows immediately from the estimate I ϕ(t) dt ≤ I |ϕ(t)| dt, which holds for any interval I and any Riemann-integrable function ϕ (even if it is complex-valued). (b) is more complicated, and we leave the proof as an exercise (see Exercise 7.3). (c) is a case of the Riemann–Lebesgue Lemma (Theorem 2.2, page 25). When dealing with Fourier series on the interval (−π, π), we have made use of special formulae in the case when the functions happen to be even or

168

7. Fourier transforms

odd. Something similar can be done for Fourier transforms. For example, if f is even, so that f (−t) = f (t), we have π ∞ 1 f (t)(cos ωt − i sin ωt) dt = 2 f (t) cos ωt dt, (7.9) f'(ω) = 2π −π 0 from which is seen that f' is real if f is real, and that f' is even (because cos(−ωt) = cos ωt). Similarly, for an odd function g, g(−t) = −g(t), it holds that ∞ g'(ω) = −2i

g(t) sin ωt dt;

(7.10)

0

if g is real, then g' is purely imaginary, and furthermore g' is odd. Integrals such as those in (7.9) and (7.10) are sometimes called cosine and sine transforms. Exercises 7.1 Compute the Fourier transforms of the following functions, if they exist: (a) f (t) = t if |t| < 1, = 0 otherwise. (b) f (t) = 1 − |t| if |t| < 1, = 0 otherwise. (c) f (t) = sin t. (d) f (t) = 1/(t − i). (e) f (t) = (sin t)(H(t + π) − H(t − π)) (H is the Heaviside function). (f) f (t) = (cos πt) H(t + 12 ) − H(t − 21 ) . 7.2 Find the Fourier transforms of f (t) = e−t H(t) and g(t) = et (1 − H(t)). 7.3 A proof of the assertion (b) in Theorem 7.1 can be accomplished along the following lines: (i) Prove that |f'(ω + h) − f'(ω)| ≤ 2 R |f (t)|sin 12 ht dt. (ii) Approximate f by a function g which is zero outside some bounded interval, as in the last step of the proof of Theorem 2.2, and use that | sin t | ≤ |t|. The proof even gives the result that f' is uniformly continuous ' on R.

7.3 Properties In this section we mention some properties of Fourier transforms that are useful when applying them to, say, diﬀerential equations. Theorem 7.2 The mapping F : f → f' is a linear map from the space ' of those continuous functions deﬁned on R ' that L1 (R) to the space C0 (R) tend to 0 at ±∞. ' is the content of (b) and (c) in Theorem 7.1. Proof. The fact that f' ∈ C0 (R) The linearity of F means just that F[f + g] = F[f ] + F[g],

F[λf ] = λF[f ]

7.3 Properties

169

when f, g ∈ L1 (R) and λ is a scalar (i.e., a complex number). This is an immediate consequence of the deﬁnition. Theorem 7.3 Suppose that f ∈ L1 (R) and let a be a real number. Then the translated function fa (t) = f (t−a) and the function eiat f (t) also belong to L1 (R), and f'a (ω) = F[f (t − a)](ω) = e−iaω f'(ω), F[eiat f (t)](ω) = f'(ω − a).

(7.11) (7.12)

Proof. For the ﬁrst formula, start with f'a (ω) = R f (t − a) e−iωt dt. The change of variable t−a = y gives the result. The proof of the second formula is maybe even simpler. These results are often called the delay rule and the damping rule for Fourier transforms. Notice the pleasant mathematical symmetry of the formulae. A similar symmetry holds for the next set of formulae. Theorem 7.4 Suppose that f is diﬀerentiable and that both f and f belong to L1 (R). Then /)(ω) = f0 (ω) = F[f ](ω) = iω f'(ω). (Df

(7.13)

If both f (t) and tf (t) belong to L1 (R), then f' is diﬀerentiable, and F[tf (t)](ω) = if' (ω) = iDf'(ω).

(7.14)

The proof of (7.13) relies, in principle, on integration by parts: ∞ ∞ −iωt −iωt ∞ ' f (ω) = f (t)e dt = f (t)e − f (t)(−iω)e−iωt dt, −∞ −∞

−∞

and one has to prove that the integrated part is zero. We omit the details, which are somewhat technical; even though f ∈ L1 (R), it does not necessarily have to tend to zero in a simple way as the variable tends to ±∞. The second formula can be proved using some theorem on diﬀerentiation under the integral sign. Indeed, if this operation is permissible, we will have d ∂ −iωt ' f (t)e−iωt dt iDf (ω) = i f (t)e dt = i dω ∂ω R R =i f (t)(−it)e−iωt dt = tf (t)e−iωt dt. R

R

We shall immediately use Theorem 7.4 to ﬁnd the Fourier transform of 2 the function f (t) = e−t /2 . 2 Diﬀerentiating, we get f (t) = −te−t /2 , and we see that f (t) + tf (t) = 0.

170

7. Fourier transforms

It is easy to see that the assumptions for Theorem 7.4, both formulae, are fulﬁlled. Transformation gives iω f'(ω) + if' (ω) = 0 or, after division by i, f' (ω) + ω f'(ω) = 0. Thus, f' satisﬁes the same diﬀerential equation as f . The general solution of this equation is easily determined, for instance, using an integrating factor: 2 2 y + ty = 0 gives y = Ce−t /2 , C = y(0). Thus, f'(ω) = Ce−ω /2 , where √ 2 C = f'(0) = f (t)e−i0t dt = e−t /2 dt = 2π. R

R

Summarizing, we have found that 1 2 √ 1 2 F e− 2 t (ω) = 2π e− 2 ω . Theorem 7.4 implies that Fourier transformation converts diﬀerentiation into an algebraic operation. This hints at the possibility of using Fourier transformation for solving diﬀerential equations, in a way that is analogous to the use of the Laplace transform. The usefulness of this idea is, however (at our present standpoint), somewhat limited, because the Fourier integral has problems with its own convergence. For example, the common homogeneous ordinary linear diﬀerential equations with constant coeﬃcients cannot be treated at all: all solutions of this sort of equation consist of linear combinations and products of functions of the types cos at, sin at, ebt , and polynomials in the variable t. The only function of these types that belongs to L1 (R) is the function that is identically zero. There are, however, categories of problems that can be treated. Later in this chapter, we shall attack some problems for the heat equation and the Laplace equation with Fourier transforms. Also, the introduction of distributions has widened the range of functions that have Fourier transforms. We shall have a glimpse of this in Sec. 7.11, and a fuller treatment is found in Chapter 8. Exercises 7.4 Assume that a is a real number = 0 and that f ∈ L1 (R). Let g(t) = f (at). Express ' g in terms of f'. 7.5 Find the Fourier transform of (a) f (t) = e−|t| cos t,

(b) g(t) = e−|t| sin t.

7.6 If f is deﬁned as in Exercise 7.1 (b), page 168, then f (t) = 0 for |t| > 1, f (t) = 1 for −1 < t < 0, f (t) = −1 for 0 < t < 1. Compute F[f ] in two ways, on the one hand using Theorem 7.4 and on the other hand by direct computation. Remark. The fact that f (t) fails to exist at some points evidently does not destroy the validity of (7.13). But f must be continuous.

7.4 The inversion theorem

171

7.7 Find f'(ω) if f (t) = (a) t e−t /2 , (b) e−(t +2t) . Hint for (b): complete the square, combine formula (7.11), the example following Theorem 7.4 and Exercise 7.4. Another way of solving the problem is indicated in the remark below. 2

2

7.8 Suppose that f (t) has Fourier transform f'(ω) = e−ω . Determine the transforms of f (2t), f (2t + 1), f (2t + 1) eit . 4

7.9 Does there exist an f ∈ L1 (R) such that f'(ω) = 1 − cos ω ? 7.10 Suppose that f has the Fourier transform f'. Find the transforms of f (t) cos at and f (t) cos2 at (a real = 0). Remark on Exercise 7.7: Problems such as 7.7 (b) and 7.8 can also be solved by writing out the Fourier integral, then rewriting it and changing variables so as to reshape the integral into a recognizable transform. For example,

2

F e−(t

+2t)

(ω) =

2

e−(t

+2t+1)+1

e−iωt dt = e

R √ t + 1 y= y/ 2,

e1+iω = √ 2

e−y

2

/2

2

e−(t+1) e−iωt dt

R

e = √ 2

t= √ −1 2 √ dt = dy/ 2

e−y

2

/2

√

e−iω(y/

2−1)

dy

R √ 2

e−iyω/

dy.

R

√ 2 The last integral is the Fourier transform of e−t /2 , computed at the point ω/ 2, 2 √ √ 2 ω = 2π e−ω /4 . The answer to the problem is which means 2π exp − 12 √ 2 thus √ 2 2 1 2 e1+iω √ F e−(t +2t) (ω) = √ · 2π e−ω /4 = π e1+iω− 4 ω . 2

7.4 The inversion theorem We now formulate the result that constitutes our promised precise version of the formula (7.6) on page 166. Theorem 7.5 (Inversion theorem) Suppose that f ∈ L1 (R), that f is continuous except for a ﬁnite number of ﬁnite jumps in any ﬁnite interval, and that f (t) = 12 (f (t+) + f (t−)) for all t. Then 1 f (t0 ) = lim A→∞ 2π

A

f'(ω) eiωt0 dω

(7.15)

−A

for every t0 where f has (generalized) left and right derivatives. In particular, if f is piecewise smooth (i.e., continuous and with a piecewise continuous derivative), then the formula holds for all t0 ∈ R.

172

7. Fourier transforms

The result, and also the proof, is very similar to the convergence theorem for Fourier series. Just as for these series, the convergence properties depend essentially on the local behavior of f (t) for t near t0 . To accomplish the proof we need an auxiliary lemma. Lemma 7.1

∞

0

π sin Au du = u 2

for A > 0.

It is easy to check, by the change of variable Au = t, that the integral is independent of A (if A > 0), so one can just as well assume that A = 1. The ∞ integral is not absolutely convergent, and 0 in this case stands for the X limit of 0 as X → ∞. There is no quite simple way to compute it. One method is using the calculus of residues, and textbooks on complex analysis usually contain precisely this integral as an example of that technique. ∞ Another attempt could build on the idea that 1/u = 0 e−ux dx, which might be substituted into the integral: ∞ ∞ ∞ ∞ ∞ sin u −ux −ux e sin u dx du = e sin u du dx du = u 0 0 0 0 0 ∞ dx π = = . 2 1 + x 2 0 There is, however, a diﬃculty here: the double integral is not absolutely convergent (the integrand is too large when x is close to 0), which makes it hard to justify the change of order of integration. However, we will not delve deeper into this problem. Proof of Theorem 7.5.

Put

1 s(t0 , A) = 2π

A

f'(ω) eit0 ω dω

−A

and rewrite this expression by inserting the deﬁnition of f'(ω): A ∞ 1 −iωt f (t) e dt eiωt0 dω s(t0 , A) = 2π −A −∞ iω(t0 −t) ω=A ∞ A ∞ 1 e 1 f (t) eiω(t0 −t) dω dt = f (t) dt = 2π −∞ −A 2π −∞ i(t0 − t) ω=−A 1 ∞ sin A(t0 − t) sin Au 1 ∞ dt = f (t) f (t0 − u) = du. π −∞ t0 − t π −∞ u Switching the order of integration is permitted, because the improper double integral is absolutely convergent over the strip (t, ω) ∈ R×[−A, A], and

7.4 The inversion theorem

173

in the last step we have put t0 −t = u. We are now in a situation very much the same as in the proof of the convergence of Fourier series; but there is a complication inasmuch as the interval of integration is unbounded. Using the lemma we can write sin Au 2 ∞ sin Au 2 ∞ f (t0 −u)−f (t0 −) f (t0 −u) du−f (t0 −) = du. π 0 u π 0 u (7.16) Now let ε > 0 be given. Since we have assumed that f ∈ L1 (R), there exists a number X such that 2 ∞ |f (t0 − u)| du < ε. π X Changing the variable, we ﬁnd that ∞ ∞ sin Au sin t dt → 0 du = u t X AX

as A → ∞.

(7.17)

The last integral in (7.16) can be split into three terms: sin Au 2 X f (t0 − u) − f (t0 −) 2 ∞ f (t0 − u) · sin Au du + du π 0 u π X u ∞ sin Au 2 du = I1 + I2 − I3 . − f (t0 −) π u X The term I3 tends to zero as A → ∞ because of (7.17). The term I2 can be estimated: ∞ 2 2 ∞ sin Au |I2 | = du ≤ f (t0 − u) |f (t0 − u)| du ≤ ε. π u π X

X

In the term I1 we have the function u → g(u) = (f (t0 − u) − f (t0 ))/(−u). This is continuous except for jumps in the interval (0, X), and it has the ﬁnite limit g(0+) = fL (t0 ) as u 0; this means that g is bounded and thus integrable on the interval. By the Riemann–Lebesgue lemma, we conclude that I1 → 0 as A → ∞. All this together gives, since ε can be taken as small as we wish, sin Au 2 ∞ f (t0 − u) du → f (t0 −) as A → ∞. π 0 u A parallel argument implies that the corresponding integral over (−∞, 0) tends to f (t0 +). Taking the mean value of these two results, we have completed the proof of the theorem. 1 ' ' ' Remark. If R ' |f (ω)| dω is convergent, i.e., f ∈ L (R), then (7.15) can be written

as the absolutely convergent integral f (t0 ) =

1 2π

∞

−∞

f'(ω) eiωt0 dω,

174

7. Fourier transforms

but in general one has to make do with the symmetric limit in (7.15).

Example 7.3. For f (t) = e−|t| we have f'(ω) = wise smooth it follows that e−|t| =

1 lim π A→∞

A

−A

2 . Since f is piece1 + ω2

eiωt dω. 1 + ω2

In this case f' happens to be absolutely integrable, and we can write simply 1 ∞ eiωt −|t| e = dω. π −∞ 1 + ω 2 We can switch letters in this formula — t and ω are exchanged for each other — and then we also change the sign of ω, and we get (after multiplication by π) the formula e−iωt π e−|ω| = dt. 2 R 1+t In this way we have found the Fourier transform of 1/(1 + t2 ), which is rather diﬃcult to reach by other methods: 1 F (ω) = π e−|ω| . 1 + t2 Example 7.4. For the function f in Example 7.2 (page 167) we have 2 sin ω . In this case, the inversion integral is not absolutely converf'(ω) = ω gent. The theorem here says that A 1 as |t| < 1, 1 sin ω iωt lim e dω = 12 as t = ±1, A→∞ π −A ω 0 as |t| > 1. Example 7.5. When using a table of Fourier transforms (such as on page 252 f. of this book), one can make use of the evident symmetry properties of the transform itself and the inversion formula in order to transform functions that are found “on the wrong side of the table.” We have actually seen an instance of this idea in Example 7.3 above. As a further example, suppose that a table contains an item like this: f (t)

f'(ω)

te−|t|

−4iω (1 + ω 2 )2

7.4 The inversion theorem

175

From this one can ﬁnd the transform of the function g(t) =

−4it (1 + t2 )2

by performing two steps: 1. Switch sides in the table, switching variables at the same time: −4it (1 + t2 )2

ωe−|ω|

2. Multiply the right-hand side by 2π and change the sign of the variable there: −4it − 2πωe−|−ω| (1 + t2 )2 This is now a true entry in the table. It may be an aesthetic gain to divide it by −4i to get t − 12 iπωe−|ω| (1 + t2 )2 Example 7.6. When working with even or odd functions, the Fourier transform can be rewritten as a so-called cosine or sine integral, respectively (see p. 168). In these cases, the inversion formula can also be rewritten so as to contain a cosine or a sine, instead of a complex exponential. Indeed, if g is even, one gets the following couple of formulae: g'(ω) = 2

∞

g(t) cos ωt dt, 0

1 g(t) = π

∞

0

g'(ω) cos tω dω,

and if h is odd, it looks like this: ' h(ω) = −2i

∞

h(t) sin ωt dt, 0

h(t) =

i π

∞

' h(ω) sin tω dω.

0

(The reader should check this.) In applied literature, one often meets these “cosine” and “sine” transforms with slightly modiﬁed deﬁnitions. Remark. In the literature one can ﬁnd many variations of the deﬁnition of the Fourier transform. We have chosen the conventions illustrated by the formula couple ∞ ∞ 1 f (t)e−iωt dt, f (t) ∼ f'(ω) = f'(ω)eiωt dω. 2π −∞ −∞

176

7. Fourier transforms

Other common conventions are described by f'(ω) =

1 2π

1 f'(ω) = √ 2π f'(ω) =

∞

−∞ ∞

−∞ ∞

f (t)e−iωt dt,

∞

f (t) ∼ −∞

f (t)e−iωt dt, −2πiωt

f (t)e

1 f (t) ∼ √ 2π

dt,

∞

f (t) ∼

−∞

f'(ω)eiωt dω,

∞

f'(ω)eiωt dω,

−∞

f'(ω)e2πitω dω.

−∞

It also happens that the minus sign in the exponent is moved from one integral to the other. As soon as Fourier transformation is encountered in real life, one must check what deﬁnition is actually being used. This is true also for tables and handbooks.

Exercises 7.11 Find the Fourier transforms of the following functions: 1 1 t (a) 2 . , (b) 2 , (c) t + 2t + 2 t + 6t + 13 (1 + t2 )2 1 − cos t . 7.12 Find the Fourier transform of t2 7.13 Find a function f (x), deﬁned for x > 0, such that

∞

f (y) cos xy dy = 0

1 . 1 + x2

(Hint: extend f to an even function and take a look at Example 7.3.) 7.14 Assume that f is diﬀerentiable and has the Fourier transform f'(ω) =

1 + iω . 1 + ω6

Compute f (0). (Note that you do not have to ﬁnd a formula for f (t).) 7.15 Suppose that f ∈ L1 (R) and that f' has a ﬁnite number of zeroes. Prove that there cannot exist a function g ∈ L1 (R) and a number a such that g(t + a) − g(t) = f (t) for −∞ < t < ∞. 7.16 A consequence of Theorem 7.5 is that if f'(ω) = 0 for all ω, then it must hold that f (t) = 0 for all t where f is continuous. Using this, formulate and prove a uniqueness theorem for Fourier transforms.

7.5 The convolution theorem Let f and g be two functions belonging to L1 (R). The convolution f ∗ g of them is now deﬁned to be the function deﬁned on R by the formula (f ∗ g)(t) = f ∗ g(t) = f (t − y) g(y) dy = f (y) g(t − y) dy. R

R

7.5 The convolution theorem

177

It can be proved, using deeper insights in the theory of integration, that this integral is actually convergent and that the new function also belongs to L1 (R). We content ourselves here with accepting these facts as true. The act of forming f ∗ g is also phrased as convolving f and g. Theorem 7.6 (Convolution theorem) F[f ∗ g] = F[f ] F[g]. Formally, the proof runs like this: F[f ∗ g](ω) = e−iωt f (t − y) g(y) dy dt R

=

R

e−iω(t−y+y) f (t − y) g(y) dt dy

R2

−iωy

=

e

g(y) dy

R

R

e−iωy g(y) dy

=

R

R

e−iω(t−y) f (t − y) dt e−iωt f (t) dt = g'(ω) f'(ω).

The legitimacy of changing the order of integration is taken for granted. Example 7.7. What function f has the Fourier transform 1 ? (1 + ω 2 )2

f'(ω) =

Solution. We start from the formula g'(ω) =

2 1 + ω2

if g(t) = e−|t| .

By the convolution theorem we get 2 F[g ∗ g](ω) = g'(ω) =

4 = 4f'(ω). (1 + ω 2 )2

Clearly, f = 14 (g ∗ g), and we thus have to convolve g with itself. For t > 0 we get ∞ 0 t ∞ 4f (t) = g ∗ g(t) = e−|t−y| e−|y| dy = + +

−∞

0

e−(t−y) ey dy +

= −∞

= e−t

−∞

t

e−(t−y) e−y dy +

0

0

−∞

e2y dy + e−t

t

dt + et 0

t

0

t ∞

et−y e−y dy

t ∞

e−2y dy = (1 + t) e−t .

178

7. Fourier transforms

(Check the computations for yourself!) Since f' is an even function, f is also even, and so we must have f (t) = 14 (1 + |t|) e−|t| . Example 7.8. If f (t) = 1/(1 + t2 ), ﬁnd f ∗ f . Solution. Put g = f ∗ f . Computing the convolution directly is toilsome. Instead, we make use of Theorem 7.6. Let us start from the fact that f'(ω) = π e−|ω| (Example 7.3, p. 174), which means that e−iωt dt = π e−|ω| . (7.18) 2 1 + t R 2 Theorem 7.6 gives g'(ω) = f'(ω) = π 2 e−|2ω| . In (7.18) we now exchange ω for 2ω, multiply by π and make the change of variable 2t = y: πe−it·2ω πe−iyω dy 2πe−iωt 2 −2|ω| g'(ω) = π e = = dt = dt. 2 2 2 2 y R 1+t R R 4+t 1+ 2 We ﬁnd that g(t) =

2π . Thus, we have proved the formula 4 + t2

∞

−∞

(1 +

2π dy = , 2 + (t − y) ) 4 + t2

y 2 )(1

t ∈ R.

Just as in Example 7.7, convolution can be employed to ﬁnd inverse Fourier transforms. Other applications occur in the solution of certain partial diﬀerential equations, whose solutions are given in the form of convolution integrals; and convolutions occur frequently in probability theory. Example 7.9. Prove the formula 1 1 sin(t − y) sin y iyt dy = e dy, t−y −1 −1 y

t ∈ R.

(7.19)

Solution. Let f (t) = H(t + 1) − H(t − 1), and g(t) = (sin t)/t. From the table of Fourier transforms we recognize that f'(ω) = g(ω)/π, and by the inversion formula we have g'(ω) = 12 f (ω). The right-hand member of (7.19) can be written like this: 1 sin y iyt f (y)g(y)eiyt dy e dy = −1 y R 2g(ω) · πf (ω) eiωt dω = 2π g'(ω) f'(ω) eiωt dω. = ' ' R R

7.5 The convolution theorem

179

The last formula consists of the inversion formula for the function whose Fourier transform is 2π f'g', and this function must be the convolution of f and g. But that convolution is just the left-hand member of (7.19). Example 7.10. Because of the formal symmetry between the Fourier transformation and the inversion formula, one can expect that there exists a formula involvning the convolution of transforms. Indeed, if f' and g' are suﬃciently nice, to ensure that the necessary integrals converge, it is true that the Fourier transform of the product f g is the convolution of the transforms (modiﬁed by a factor of 1/(2π)): 1 1 ' 0 f g(ω) = f'(ω − α) g(α) dα = f ∗ g'(ω). 2π R 2π ' Exercises 7.17 Let fa be deﬁned for a positive number a as the function a 1 , π a 2 + t2

fa (t) =

t ∈ R.

Compute the convolution fa1 ∗fa2 . Generalize to more than two convolution factors. 7.18 Find a solution of the integral equation

∞

f (t − y) e−|y| dy =

−∞

∞

7.19 Determine some f such that

4 3

e−|t| −

f (t − y) e−y

2

/2

2 3

e−2|t| .

2

dy = e−t

/4

.

−∞

7.20 Find a function f such that

1

−1

f (t − y) dy = e−|t−1| − e−|t+1| , t ∈ R.

7.21 Compute the integral

∞

−∞

sin[5(t − u)] sin(6u) du, u(t − u)

t ∈ R.

7.22 Let f ∈ L1 (R) be such that f is continuous and f ∈ L1 (R). Find a function g ∈ L1 (R) such that

t

g(t) = −∞

eu−t g(u) du + f (t),

t ∈ R.

180

7. Fourier transforms

7.6 Plancherel’s formula We shall now indicate an intuitive deduction of a formula that corresponds to the Parseval formula for Fourier series. If these series are written in the “complex” version, we have ∞

1 2π

|cn |2 =

n=−∞

π

−π

|f (t)|2 dt,

where

cn =

1 2π

π

f (t) e−int dt.

−π

A simple change of variables yields the corresponding formula on the interval (−P, P ): put 1 cn = 2P and we will have

∞

P

f (t) e−inπt/P dt,

−P

1 2P

|cn |2 =

n=−∞

P

−P

|f (t)|2 dt.

(7.20)

Just as on page 165 we introduce the “truncated” Fourier transform f'(P, ω) =

P

f (t) e−iωt dt,

−P

so that cn =

or

1 ' f (P, nπ/P ), and (7.20) takes the form 2P P ∞ 1 1 ' nπ 2 |f (t)|2 dt = f P, 4P 2 n=−∞ P 2P −P

P

−P

|f (t)|2 dt =

∞ 1 ' nπ 2 π · . f P, 2π n=−∞ P P

In the same way as on page 165 we can consider the right-hand member to be almost a Riemann sum, and if we let P → ∞ we ought to obtain ∞ ∞ 1 |f (t)|2 dt = |f'(ω)|2 dω. (7.21) 2π −∞ −∞ In fact, this formula is actually true as soon as one knows that one of the integrals is convergent — if so, the other one will automatically converge as well. A correct and consistent theory of these matters cannot be achieved without having access to the integration theory of Lebesgue. The formula (7.21) is known as the Plancherel formula (also sometimes as the Parseval formula).

7.6 Plancherel’s formula

181

Example 7.11. The Plancherel formula enables us to compute certain integrals. If f (t) = 1 for |t| < 1 and = 0 otherwise, then (see Example 7.2 2 sin ω p. 167) f'(ω) = . Plancherel now gives ω ∞ 1 4 sin2 ω 1 1 dt = dω, 2π −∞ ω 2 −1 or, after rewriting,

∞

−∞

sin2 t dt = π. t2

This integral is not very easy to compute using other methods. 2 Just as in Chapter 5, we can denote by L (R) the set of functions f deﬁned on R such that the integral R |f (t)|2 dt is convergent. If f and g are both in L2 (R), it can be seen (just as in Sec. 5.3) that we can deﬁne an inner product by the integral f, g = f (x) g(x) dx. R

Introducing the L2 norm in the usual way, f = formula can be written in the compact form f 2 =

f, f , Plancherel’s

1 '2 f . 2π

There are a number of variants of the Plancherel formula. One is related to the formula for inner products in an ON basis and looks like this: ∞ ∞ 1 f (t) g(t) dt = f (ω) g(ω) dω. 2π −∞ −∞ This can be obtained from the ordinary Plancherel formula using the identity f, g = 14 f + g2 + if + ig2 − f − g2 − if − ig2 , which is easily proved (it is Exercise 5.6 on page 110). The following formula is another variation. Let f ∈ L1 (R) and g ∈ 1 ' L (R). (Thus, g is deﬁned on the “wrong” real line.) Then it holds that ∞ ∞ f (t) g'(t) dt = f'(ω) g(ω) dω. (7.22) −∞

−∞

This is easily proved by considering the double integral f (t) g(ω) e−itω dt dω, ' R×R

182

7. Fourier transforms

and computing this in two diﬀerent ways. The computation is completely legitimate, because the double integral is easily seen to be absolutely convergent. The resulting formula (7.22) plays a central role in Chapter 8. Example 7.12. As an application of the last formula, we give a new proof of the formula 1 1 sin(t − y) sin y iyt (7.23) dy = e dy, t ∈ R. t − y −1 −1 y (see Example 7.9 above). Let f (y) = H(y + 1) − H(y − 1) and g(ω) = eitω f (ω). Then 2 sin ω 2 sin(y − t) 2 sin(t − y) f'(ω) = and g'(y) = = . ω y−t t−y The identity f g' = f'g then gives the formula (after some preening). Exercises 7.23 Compute the integral

∞

−∞

t2 dt (1 + t2 )2

by studying the odd function f deﬁned by f (t) = e−t for t > 0. 7.24 Using the results of Exercise 7.5, compute the integrals

0

∞

t2 dt (t4 + 4)2

and 0

∞

(t2 + 2)2 dt. (t4 + 4)2

7.7 Application 1 We consider the following problem for the heat equation: (E) (I)

uxx = ut , t > 0, u(x, 0) = f (x),

x ∈ R, x ∈ R.

The solution u(x, t) represents the temperature at the point x of an inﬁnite rod, isolated from its surroundings, if the temperature at time t = 0 is given by the function f (x). Initially, we adopt the extra assumptions that f ∈ L1 (R) and that for every ﬁxed t > 0 the function x → u(x, t) also belongs to L1 (R). Then the Fourier transforms ' f (ω) = f (x) e−iωx dx, R U (ω, t) = Fx [u(x, t)](ω) = u(x, t) e−iωx dx R

7.7 Application 1

183

exist for all t ≥ 0. (The subscript x on F signiﬁes that the transform is taken with respect to the variable x.) We also assume that we can treat the diﬀerentiations in a formal manner, by which we mean for one thing that the rule (7.13) of Theorem 7.4 can be used twice, for another that ∂ ∂u ∂U = Fx [u] = . Fx [ut ] = Fx ∂t ∂t ∂t In this case, (E) and (I) are transformed into ∂U , ∂t U (ω, 0) = f'(ω) −ω 2 U =

ˆ (E) (ˆI)

t > 0,

' ω ∈ R, ' ω ∈ R.

ˆ can be solved like a common ordinary diﬀerential equation (think for a (E) moment of ω as a constant): we get U = C exp(−ω 2 t), where the constant of integration C need not be the same for diﬀerent values of ω. Indeed, adapting to the initial condition (ˆI) we ﬁnd that we should have C = f'(ω), so that 2 U (ω, t) = f'(ω) e−ω t . For recovering u(x, t) we notice that U is a product of two Fourier transforms. By performing a suitable change of variables in the formula √ F[exp(− 12 x2 )](ω) = 2π exp(− 12 ω 2 ) we can ﬁnd that Fx

2 2 1 x √ (ω) = e−ω t . exp − 4t 4πt

Let E(x, t) be the expression that is being transformed here. Then we have U (ω, t) = Fx [E(x, t)](ω) · F[f ](ω). By the convolution theorem, u(x, t) = E(x, t) ∗ f (x) = √

1 4πt

∞

−∞

e−y

2

/(4t)

f (x − y) dy,

t > 0.

This integral formula has been deduced by formal calculations with Fourier transforms, but in its ﬁnal appearance it does not contain any such transforms. In fact, it works in far more general situations than those indicated by our assumptions. Indeed, it is suﬃcient to assume that f is a continuous and bounded function on R. Then the integral in the formula exists for all x ∈ R and t > 0 (show it!) and satisﬁes the equation uxx = ut , and in addition it holds that lim u(x, t) = f (x). The last assertion follows from the t0

184

7. Fourier transforms

fact that E(x, t) is a positive summation kernel in the variable x, indexed by the variable t tending to 0 from above. The solution obtained also has a nice statistical interpretation. It is the convolution of the initial values by the density function of a normal probability distribution with expected value zero and a variance growing with time. Loosely speaking, this can be said to mean that the temperature is “smeared out” in a very regular way along the axis. Remark. As an example of this, let the initial temperature be given by u(x, 0) = 1 for |x| < 1 and 0 otherwise. The solution will be u(x, t) = √

1 4πt

1

exp(−(x − y)2 /(4t)) dy = √

−1

1 4πt

x+1

e−y

2

/(4t)

dy.

x−1

It is easy to see that the value of this integral is positive for all (x, t) with t > 0. This is really a cause of concern: it means that points at arbitrary distance far away on the rod will, immediately after the initial moment, be aware of the fact that the temperature near the origin was positive when t was 0. The information from the vicinity of the origin thus travels with inﬁnite speed along the rod, which is in conﬂict with the wellknown statement from the theory of relativity: nothing can travel faster than light! This indicates that the mathematical model that gives rise to the heat equation must be physically incorrect. What is wrong? Well, for one thing, in this model, matter is considered to be a perfectly homogeneous medium, which is a macroscopic approximation that does not hold at all on a small scale: in reality, matter is something discrete, consisting of atoms and subatomic particles. Yet another thing is that in the model heat itself is considered to be a homogeneous, ﬂowing substance: in reality, heat is a macroscopic “summary” of the movements of all the particles of matter. Yet another example of the strange behaviour of the heat equation is the fol¨ rner’s book Fourier Analysis. Deﬁne a function lowing, taken from Thomas Ko h by letting

1 h(t) = exp − 2 2t

,

t > 0;

h(t) = 0,

t ≤ 0.

This function belongs to C ∞ (R), which is not very hard to prove. If we go on to deﬁne g(t) = h(t − 1) h(2 − t), then g is a C ∞ -function which is positive for 1 < t < 2 and zero elsewhere. Finally let u(x, t) =

∞ g (m) (t) m=0

(2m)!

x2m .

2

Now we have a function u : R → R with the following properties: (a) (b) (c)

ut (x, t) = uxx (x, t) u(x, t) = 0 u(x, t) > 0

for all (x, t) ∈ R2 , for all t ∈ / [1, 2], x ∈ R, for all t ∈]1, 2[, x ∈ R.

The proof of these assertions can be found in K¨ orner’s book, Sec. 67.

7.8 Application 2

185

Thus, here we have an inﬁnite rod, which has at time 0 the temperature 0 everywhere. This state of aﬀairs remains until time reaches 1: then suddenly the whole rod acquires positive temperature, which rises and then again falls back to zero at time 2. K¨ orner calls this “the great blast of heat from inﬁnity.” We see again (cf. page 4) that the “natural” initial value problem for the heat equation behaves very badly as concerns uniqueness: indeed there are heaps of solutions. I cannot abstain from quoting K¨ orner’s rounding-oﬀ comment on this example: To the applied mathematician . . . [this example] is simply an embarrassment reminding her of the defects of a model which allows an unbounded speed of propagation. To the numerical analyst it is just a mild warning that the heat equation may present problems which the wave equation does not. But the pure mathematician looks at it with the same simple pleasure with which a child looks at a rose which has just been produced from the mouth of a respectable uncle by a passing magician.

Exercises

1 x2 exp − is a solution of the 4t 4πt heat equation in the region t > 0. What are the initial values as t 0 ?

7.25 Show that the function E(x, t) = √

7.26 For an inﬁnite rod the units of length x and time t are chosen so that the heat equation takes the form uxx = ut . The temperature at time t = 0 is 2 2 given by the function e−x + e−x /2 . Determine the function that describes the temperature at every moment t > 0. 7.27 A semi-inﬁnite rod, materialized as the interval [0, ∞[, has at time t = 0 2 the temperature ex for 0 < x < 1, 0 for x > 1. When t > 0, the end point (i.e., the point x = 0) is kept at a constant temperature of 0. Determine the temperature for every x at time t = 14 . Hint: deﬁne boundary values f (x) for x < 0 by f (x) = −f (−x), to make f an odd function. Then solve the problem as if the rod were doubly inﬁnite. Show that this actually gives a solution with the correct boundary values for x > 0. 7.28 Find, in the form of an integral, a solution u of uxx = ut for t > 0, such that u(x, 0) = 1 if |x| < 1, = 0 if |x| > 1.

7.8 Application 2 We shall treat the following problem for the Laplace diﬀerential equation: uxx + uyy = 0, x ∈ R, y > 0, u(x, 0) = f (x), x ∈ R, u bounded for y > 0.

186

7. Fourier transforms

Under the additional assumption that, for every ﬁxed y, the function x → u(x, y) is of class L1 (R), we can Fourier transform the problem with respect to x. Let U (ω, y) denote this Fourier transform: u(x, y) e−iωx dx. U (ω, y) = Fx [u(x, y)](ω) = R

Let us also assume that diﬀerentiation with respect to y commutes with Fourier transformation: Fx [uyy ] =

∂2 Fx [u]. ∂y 2

Then the Laplace equation is transformed into −ω 2 U (ω, y) +

∂2 U (ω, y) = 0. ∂y 2

Now we temporarily regard ω as a constant and solve this diﬀerential equation with the independent variable y. The general solution is U (ω, y) = A(ω)e−yω + B(ω)eyω . For U to be bounded for y > 0 one must have A(ω) = 0 for ω < 0 and B(ω) = 0 for ω > 0, which means that we can write U (ω, y) = C(ω)e−y|ω| , where C(ω) = A(ω) + B(ω). For y = 0 we get U (ω, 0) = f'(ω) = C(ω), which implies that U (ω, y) = f'(ω) e−y|ω| . (7.24) By inversion of this Fourier transform one can obtain the desired function u. Using the convolution theorem, we can also establish a solution formula in the form of an integral. Since e−y|ω| is the Fourier transform of it holds that u(x, y) = (Py ∗ f )(x) =

y π

∞

−∞

1 y = Py (x), π y 2 + x2 f (t) dt. (x − t)2 + y 2

(7.25)

This formula is commonly called the Poisson integral formula for the halfplane y > 0. Indeed, this formula holds under more general conditions than our derivation demands (for instance, it is suﬃcient to assume that f is continuous and bounded.) The boundary values are right, because the functions {Py } constitute a positive summation kernel, as y 0. In practice, it may sometimes be easier to invert the Fourier transform (7.24), in other cases it is better to use the integral formula (7.25). Exercise 7.29 In the unbounded plane sheet {(x, y) : y ≥ 0} there is a stationary and bounded temperature distribution u. It is known that u(x, 0) = 1/(x2 + 1). Determine u(x, y) for all y > 0.

7.9 Application 3: The sampling theorem

187

7.9 Application 3: The sampling theorem Here we give an important theorem with applications in the technology of sound recording. Let c be a positive number. Assuming that a signal f (t) is built up using angular frequencies ω satisfying |ω| ≤ c, it is possible to reconstruct the entire signal by sampling it at discrete time intervals at distance π/c. More precisely, we shall prove the following Theorem 7.7 (Shannon’s sampling theorem) Suppose that f is continuous on R, that f ∈ L1 (R) and that f'(ω) = 0 for |ω| > c. Then nπ ! sin(ct − nπ) , f (t) = f c ct − nπ n∈Z

where the sum is uniformly convergent on R. Proof. By the Fourier inversion formula, we have c 1 f (t) = f'(ω) eitω dω. 2π −c

(7.26)

We shall rewrite this integral. We introduce a function g as follows: c g(ω) = f'(ω), |ω| < c. π This can be considered as a restriction to the interval (−c, c) of a 2c-periodic function with Fourier series cn (g)ei(nπ/c)ω , g(ω) ∼ n∈Z

where cn (g) =

1 2c

c

g(ω) e−i(nπ/c)ω dω =

−c

1 2π

nπ! . f'(ω) e−i(nπ/c)ω dω = f − c −c c

We also consider the function h given by h(ω) = e−itω ,

|ω| < c.

In the same way as for g, we have h(ω) ∼ cn (h)ei(nπ/c)ω , n∈Z

with cn (h) =

=

1 2c

c

e−itω e−i(nπ/c)ω dω =

−c

sin(ct + πn) . ct + πn

ω=c 1 e−itω−i(nπ/c)ω nπ 2c −it − i ω=−c c

188

7. Fourier transforms

We now go back to (7.26) and rewrite it, using the polarized Parseval formula for functions with period 2c: c c c ' 1 1 −iωt dω = g(ω) h(ω) dω f (t) = f (ω) e 2c −c π 2c −c nπ ! sin(ct + πn) nπ ! sin(ct − πn) = = . cn (g)cn (h) = f − f c ct + πn c ct − πn n∈Z

n∈Z

n∈Z

The convergence of the series is clear, since both g and hare L2 functions. N Indeed, the convergence of symmetric partial sums sN = −N is uniform in t, because estimates of the remainder are uniform. The theorem is proved. Remark. The theorem explains why CD recordings and DAT tapes are possible. The human ear cannot hear sounds with a frequency above, say, 20 kHz. The sound signal can thus be considered to have its frequency spectrum totally within this range. If it is sampled at suﬃciently small intervals, and if the sampling is precise enough, it is then possible to recover the sound from the digitalized sample record. Ordinary CD recorders use a sampling frequency of 44.1 kHz.

7.10 *Connection with the Laplace transform In this section we return to the Laplace transform. We also assume that the reader has some knowledge of complex analysis, in particular the theory of residues. We shall demonstrate how the Laplace transform can be considered as a special case of the Fourier transform. Assume that f (t) is deﬁned and piecewise continuous for t ∈ R and that f (t) = 0 for t < 0. Also suppose that there exist constants t0 , M , and k so that |f (t)| ≤ M ekt for all t > t0 : we say that f grows (at most) exponentially. Let s = σ + iω be a complex variable, where σ and ω are real. The Laplace transform of f is deﬁned as the function ∞ ∞ f (t)e−st dt = f (t)e−σt e−iωt dt. (7.27) f(s) = 0

−∞

The integral converges absolutely as soon as σ > k, where k is introduced just above. The integral then deﬁnes a function analytic at least in the half-plane σ > k. This can be seen by the functions n Fn (s) =

the number f, which is noting that

f (t) e−st dt

0

are analytic and that Fn → f uniformly in every interior half-plane σ ≥ σ0 , where σ0 > k. The details are omitted here.

7.10 *Connection with the Laplace transform

189

What is now of interest is the fact that the formula (7.27) shows that the Laplace transform of f can be seen as the Fourier transform of the function f (t)e−σt . If we assume that f is such that the Fourier inversion formula can be applied, we can then write f (t)e−σt =

1 lim 2π A→∞

A

f(σ + iω) eitω dω.

−A

If this equality is multiplied by eσt and we reintroduce σ + iω = s, we get 1 lim f (t) = 2πi A→∞

σ+iA

f(s)ets ds,

(7.28)

σ−iA

where the notation i dω = ds serves to indicate that the integral is a contour integral in the complex plane. The contour is a vertical line in the half-plane σ > k. Since we have assumed that f (t) = 0 for t < 0, the integral in (7.28) will always be zero for negative values of t. For t positive, it can sometimes be calculated using residues and a half-circular contour to the left of the vertical line. We demonstrate this by an example. Example 7.13. Find the function whose Laplace transform is f(s) = 1/(s2 + 1). Solution. We want to compute 1 lim 2πi A→∞

σ+iA

σ−iA

ets ds. s2 + 1

The integrand has simple poles at s = ±i and is analytic in the rest of the s-plane. We can choose σ = 1, say, and make a closed contour by adjoining CA , the left-hand half of the circle |s − 1| = A. Taking account of the factor 1/(2πi) in the formula, the integral over the closed contour is the sum of the residues: ets ets eit = lim = , + 1 s→i s + i 2i eit − e−it = sin t. Res = 2i

Res

s=i s2

Res

ets ets e−it = lim = , + 1 s→−i s − i −2i

s=−i s2

The integral along the circular arc can be estimated, using the fact that |s| = |s − 1 + 1| ≥ |s − 1| − 1 = A − 1 and σ = Re s ≤ 1: 1 et est eσt |ds| ≤ 1 ds |ds| ≤ 2π 2πi 2 2 2π CA (A − 1)2 − 1 CA s + 1 CA |s| − 1 =

et Aπ · →0 2π (A − 1)2 − 1

as A → ∞.

190

7. Fourier transforms

The conclusion is that the desired limit, which is f (t) for t > 0, is sin t. Exercises 7.30 Check that the integral in Example 7.13 is zero for t < 0. What is its value for t = 0 ? 7.31 Find the inverse Laplace transform of s/(s2 + 1) by the method of Example 7.13. What is the value of the integral for t = 0 ? 7.32 Example 7.13 can be generalized thus: Suppose that f(s) is analytic in the entire s-plane except for a ﬁnite number of isolated singularities, that f is analytic in Re s > k, and that there is an estimate of the form |f(s)| ≤ M/|s|α for |s| ≥ R, where α > 0. Then, for t > 0, f (t) = the sum of all the residues for the function ets f(s). Prove this (or “check” it)!

7.11 *Distributions and Fourier transforms We shall now see what happens if we try to obtain Fourier transforms of simple distributions such as those considered in Sec. 2.6–7. At this point, (n) we treat only expressions such as δa (t). The more revolutionary aspects of the theory are postponed to Chapter 8. It is rather obvious what the indicated transforms should be. We recall (n) that δa (t) was deﬁned so as to have the following eﬀect on a suﬃciently smooth function ϕ: δa(n) (t)ϕ(t) dt = (−1)n ϕ(n) (a). In particular, if we take ϕ(t) = e−iωt , we should have / (n) δa (ω) = δa(n) (t)e−iωt dt = (−1)n (−iω)n e−iωa = (iω)n e−iaω . ' As a special case, we have that δ(ω) = 1 for all ω. A physical interpretation of this is that the δ “function” is composed out of all frequencies with equal amplitudes (or, rather, equal amplitude density). This kind of signal is sometimes given the name “white noise.” If the situation is interpreted literally, it means that δ has inﬁnite energy, and thus it cannot be realized in physical reality. However, it can be treated as a formalism that turns out to be useful. The convolution of δ and a (smooth) function ϕ should reasonably work like this: δ ∗ ϕ(t) = δ(t − u)ϕ(u) du = ϕ(t). R

Thus, δ acts as an algebraic identity with respect to the convolution operation. Let us also accept that the convolution operation is commutative and associative, even when one of the objects involved is a δ.

7.11 *Distributions and Fourier transforms

191

If the functions involved are suﬃciently nice, a convolution can be differentiated past the integral sign. The result is the simple formula (f ∗ g) = f ∗ g = f ∗ g . The applications in Sec. 7.7–8 can then be attacked along the following lines. Let us ﬁrst study the heat equation, and assume that the initial values are δ: uxx = ut ,

x ∈ R, t > 0;

u(x, 0) = δ(x),

x ∈ R.

Fourier transformation gives, just as in Sec. 7.7, −ω 2 U =

dU , dt

' t > 0; ω ∈ R,

U (ω, 0) = 1,

' ω ∈ R.

Solving this diﬀerential equation we get U (ω, t) = e−ω t , 2

and inverting this Fourier transform gives u(x, t) = E(x, t) = √

2 1 x . exp − 4t 4πt

Now assume that f is some (continuous) function, not necessarily in L1 (R), and consider the general initial value problem: uxx = ut ,

x ∈ R, t > 0;

u(x, 0) = f (x),

x ∈ R.

If we put u = E ∗ f , we will now have a solution of this problem. Indeed, since E satisﬁes the heat equation, it is clear that uxx −ut =

∂2 ∂ E ∗f − E ∗f = Exx ∗f −Et ∗f = (Exx −Et )∗f = 0∗f = 0. ∂x2 ∂t

And since E → δ as t 0, it should also follow that the boundary values are right: u(x, t) = E(x, t) ∗ f (x) → δ ∗ f (x) = f (x). x

We also give an example where we use Fourier transformation to solve an ordinary diﬀerential equation. Example 7.14. Find a solution of the equation y (t) − y(t) = δ(t). Solution. Fourier transformation, and using the rule for the transform of a derivative, gives (iω)2 y'(ω) − y'(ω) = 1. If we solve for y', we ﬁnd y'(ω) = −1/(1 + ω 2 ), which is a well-known transform: apparently y(t) = − 12 e−|t| . And, indeed, if we look at this function,

192

7. Fourier transforms

we see that y (t) = y(t) for all t = 0; and at t = 0, the ﬁrst derivative has an upward jump of one unit, which conﬁrms that we have found a solution. The reader should recognize this type of equation. Its homogeneous counterpart has the solutions yH = Aet + Be−t , and thus the given equation has the general solution y = − 12 e−|t| + yH . We seem to have lost all these solutions except for one. This depends on the fact that all the others actually cannot be Fourier transformed at all, not even as distributions. But as a means of ﬁnding a particular solution, the method obviously works in this case. Exercise 7.33 Find a solution of the equation y (t) + 3y (t) + 2y(t) = δ(t).

Summary of Chapter 7 Deﬁnition If f ∈ L1 (R), the Fourier transform of f is the function F[f ] = f' given by ' ' f (t)e−iωt dt, ω ∈ R. f (ω) = R

Theorem ' that tends to 0 as If f ∈ L1 (R), then f' is a continuous function on R |ω| → ∞. Theorem (Inversion theorem) Suppose that f ∈ L1 (R), that f is continuous except for a ﬁnite number of ﬁnite jumps in any ﬁnite interval, and that f (t) = 1 2 (f (t+) + f (t−)) for all t. Then A 1 f (t0 ) = lim f'(ω) eiωt0 dω A→∞ 2π −A for every t0 where f has (generalized) left and right derivatives. In particular, if f is piecewise smooth (i.e., continuous and with a piecewise continuous derivative), then the formula holds for all t0 ∈ R. A collection of formulae for the Fourier transform begins on page 252.

Historical notes The Fourier transform, or Fourier integral, ﬁrst appears in the works of Fourier himself. Its development has run parallel to that of Fourier series ever since. Recent developments in signal processing have triggered the result known as the sampling theorem, which is attributed to Claude Shannon (1916–2001). He was the founder of information theory.

Problems for Chapter 7

193

Problems for Chapter 7 7.34 Compute the Fourier transform of f , deﬁned by

f (x) =

∞

2 − |x|, |x| < 2, 0, |x| > 2. sin t t

Use the result to compute −∞

!4 dt.

7.35 The function f is continuous on R, and both f and f belong to L1 (R). Compute the Fourier transform of f , if 2f (x)−f (x+1)+f (x) = exp(−|x|), x ∈ R. 1 7.36 Find the Fourier transform of 2 . x + 4x + 13 eix sin x 1 , (b) , (c) . 7.37 Find the Fourier transforms of (a) 2 1 + 9x 1 + 9x2 1 + 9x2 x 7.38 Find the Fourier transform of f (x) = . (1 + x2 )2 7.39 A function f is deﬁned by f (x) = 2x if |x| < 1, f (x) = 0 otherwise. (a) Compute the Fourier transform f' of f . a (b) For all x ∈ R, determine lim −a f'(t) eitx dt.

∞

(c) Compute −∞

a→∞ 2

sin t cos t − t2 t

!

dt.

7.40 Let fN (t) = πN 2 for 0 < t < 1/N , f (t) = 0 for t > 1/N , and deﬁne fN (t) for t < 0 through the condition that fN be an odd function. Compute the Fourier transform of fN , and then ﬁnd lim f'N (ω). N →∞

7.41 Find the Fourier transform of f , when f (t) = sin t for |t| < π, = 0 for |t| ≥ π, and use the result to compute

∞

−∞

sin2 πt dt. (t2 − 1)2

!

∞

sin x 2 dx = π by transforming the function x −∞ 1, |x| ≤ 1, and using the Plancherel formula. f (x) = 0, |x| > 1

7.42 Show that

7.43 Let f (t) = 1 − t2 for |t| < 1, = 0 otherwise. Find f' and use the result to ﬁnd the values of the integrals

∞

−∞

sin t − t cos t dt t3

∞

and −∞

(sin t − t cos t)2 dt. t6

7.44 Compute the integral

∞

F (ω) = −∞

sin α dα, α(1 + (ω − α)2 )

−∞ < ω < ∞.

194

7. Fourier transforms

7.45 Solve the integral equation

∞

−∞

f (y) a , dy = 2 (x − y)2 + 1 a + x2

x∈R

using Fourier transforms. Conditions on a?

−|x|

7.46 (a) Let f (x) = e

∞

. Find f ∗ f (x) =

f (y) f (x − y) dy. −∞

(b) Using Fourier transforms, solve the diﬀerential equation y (x) − y(x) = e−|x|

x ∈ R.

7.47 Let the signal f (t) = A1 cos(ω1 t + θ1 ) + A2 cos(ω2 t + θ2 ) be given. Compute 1 rxx (t) = lim T →∞ T

T /2

f (u) f (t + u) du −T /2

(the auto-correlation function, ACF). Try to ﬁnd the frequency spectrum Pxx (ω) of rxx (this is called the energy spectrum of f ; the connection between Pxx and rxx is called the Wiener–Khinchin relations). To determine Pxx correctly, you should know something about distributions (e.g., the Dirac measure δ). 7.48 Suppose that a certain linear system transforms an incoming signal f into an outgoing signal y that is a solution of y (t) + ay (t) + by(t) = f (t), where a and b are constants. Show that if the roots of the characteristic equation r2 + ar + b = 0 both have their real parts < 0, then the system is causal; i.e., the value y(t) at any time t depends only on the values of f (u) for u ≤ t. 7.49 Find all functions f ∈ L1 (R) that satisfy the integral equation

∞

2

f (t − y) e−|y| dy = e−t

/2

,

t ∈ R.

−∞

7.50 Find the Fourier transform of the function f (x) = x e−|x| . 7.51 Determine the Fourier transform of

f (x) =

e−x , x > 0, −ex , x < 0,

∞

and then compute the integral −∞

x2 dx. (1 + x2 )2

7.52 Find a solution of the integral equation

∞

−∞

f (x − y) e−|y| dy = (1 + |x|) e−|x| .

Problems for Chapter 7

195

7.53 Find a solution of the integral equation f (x) = e−|x| +

1 2

ex

∞

e−y f (y) dy,

−∞ < x < ∞.

x

7.54 Using Fourier transformation, ﬁnd a solution of the integral equation 2

e−x =

∞

2

e−4(x−y) f (y) dy.

−∞

∞

7.55 Compute −∞

sin t eitx dt for −1 < x < 1. Be careful about the details! · t 1 + t2

This page intentionally left blank

8 Distributions

8.1 History In star-marked sections in the previous chapters we have sketched how it is possible to extend the notion of function to include things such as “instantaneous pulses” and similar phenomena. The present chapter will present a more coherent introduction to these distributions. The presentation is biased in the way that it centers on the kind of distribution theory that appears to be natural in connection with Fourier theory, and it is not very far-reaching. A complete study of the theory of distributions is beyond the intended scope of this book. The reader should be able to study this chapter without having read the starred sections in the former chapters. This means that there is a certain duplication of examples, etc. This applies in particular to this introductory section, where a number of the following examples are repetitions of things that are also found in Sec. 2.6. We are going to indicate a number of more-or-less puzzling diﬃculties that had vexed mathematicians for a long time. Various ways of going around the problems were suggested, until at last time was ripe, in the 1930s and 1940s, for the modern theory that we shall touch upon in this chapter. Example 8.1. Already in Sec. 1.3 (on the wave equation) we saw diﬃculties in the usual demand that solutions of a diﬀerential equation of order n shall actually have (maybe even continuous) derivatives of order n. Quite natural solutions, such as those of Exercise 6.7, get disqualiﬁed for reasons that seem more of a “bureaucratic” than physical nature. This indicates

198

8. Distributions

that it would be a good thing to widen the notion of diﬀerentiability in one way or another. Example 8.2. Ever since the days of Newton, physicists have been dealing with situations where some physical entity assumes a very large magnitude during a very short period of time; often this is idealized so that the value is inﬁnite at one point in time. A simple example is an elastic collision of two bodies, where the forces are thought of as inﬁnite at the moment of impact. Nevertheless, a ﬁnite and well-deﬁned amount of impulse is transferred in the collision. How is this to be treated mathematically? Example 8.3. A situation that is mathematically analogous to the previous one is found in the theory of electricity. An electron is considered (at least in classical quantum theory) to be a point charge. This means that there is a certain ﬁnite amount of electric charge localized at one point in space. The charge density is inﬁnite at this point, but the charge itself has an exact, ﬁnite value. What mathematical object describes this? Example 8.4. In Sec. 2.4 we studied positive summation kernels. These consist of sequences of non-negative functions with integral equal to 1, that concentrate toward a ﬁxed point, as a parameter tends to inﬁnity. Can we invent a mathematical object that can be interpreted as the limit of such a sequence? Example 8.5. There is also a sort of inverted problem, compared with the ones in Examples 8.2–3 above. Suppose that we want to measure a physical quantity f (t), that depends on time t. Is it really possible to determine f (t) at a particular point in time? Every measurement takes some time to perform. A speedometer, for example, must be constructed so that it deals with time intervals of positive length, and the value indicated by it is necessarily some kind of mean value of the speed attained during the latest period of time. Heisenberg’s undecidedness principle actually tells us that certain types of measurement cannot be exact at all ; the best we can hope for is to get some mean value. Example 8.6. In Sec. 7.7 and 7.8 we solved a couple of problems for partial diﬀerential equations using Fourier transformation. In order to be able to use this method we had to impose rather restrictive conditions on the solutions — they had to be integrable in a certain way, and diﬀerentiability past an integral sign had to be explicitly assumed. But in both of these cases, the result of the calculations was a formula that was actually valid in far more general situations than those demanded by the method. Is there something going on behind the stage, that we could drag out in clear view and enable us to do our Fourier transformations without hesitations and bad conscience?

8.1 History

199

The problems in Examples 8.2 and 8.3 above have been treated by many physicists ever since the later years of the nineteenth century by using the following trick. Let us assume that the independent variable is t. Introduce a “function” δ(t) with the following properties:

(1) (2) (3)

δ(t) ≥ 0 for − ∞ < t < ∞, δ(t) = 0 for t = 0, ∞ δ(t) dt = 1. −∞

Regrettably, there is no ordinary real-(or complex)-valued function that satisﬁes these conditions. Condition 2 irrevocably implies that the integral in condition 3 must be zero. Nevertheless, using formal calculations involving the object δ, it was possible to arrive at results that were both physically meaningful and “correct.” A name that is commonly associated with this is P. Dirac, but he was not the only person (nor even the ﬁrst one) to reason in this way. He has, however, given his name to the object δ: it is often called the Dirac delta function (or the Dirac measure, or the Dirac distribution). One way of making legitimate the formal δ calculus is to follow the idea that is hinted at in Example 8.4. If δ occurs in a formula, it is replaced by a positive summation kernel KN ; upon this one then does one’s calculations, and ﬁnally one passes to the limit. In a certain sense (which will be made precise at the end of Sec. 8.4), it is true that δ = lim KN . N →∞

The problems presented by Example 8.5 can be tackled in a very unconventional way. We simply give up the requirement (or aspiration) that the “function” f actually does possess any values f (t) at all at precise points t. Instead, it is thought to have values at “fuzzy points”; i.e., it is possible to account for (weighted) means of f over intervals of positive length, these means being real or complex numbers. Our strategy now is the following. First we make precise what we mean by a fuzzy point (in Sec. 8.2). Then, in Sec. 8.3, we deﬁne our generalization of the notion of a function, which will be called a distribution. After that, we build the machinery that will lead to the solution of the dilemmas presented as Examples 8.1–6 (including numbers 1 and 6, which have not been more closely examined in the present discussion). The whole exposition is very sketchy. For a more complete theory we refer to more penetrating literature, such as the monumental standard work by ¨ rmander, The Analysis of Linear Partial Diﬀerential Operators, Lars Ho Volume 1.

200

8. Distributions

8.2 Fuzzy points – test functions Here we introduce so-called test functions, which shall serve, among other things, as the “fuzzy points” mentioned at the end of last section. We do it in one dimension, but the whole theory is easily redone in an arbitrary ﬁnite dimension. Thus, we consider a real x-axis denoted by R, as usual. A test function is an inﬁnitely diﬀerentiable complex-valued function, ϕ : R → C, ϕ ∈ C ∞ (R). In these connections one normally uses a more concise notation for the last-mentioned set: we write E = C ∞ (R). We shall deﬁne two important subsets of E. First we deﬁne the support of a function ϕ: support of ϕ = supp ϕ = {x ∈ R : ϕ(x) = 0}. Thus, a point x belongs to supp ϕ if every neighborhood of x contains points where ϕ(x) = 0; the fact that x is not in the support of ϕ means that ϕ(y) = 0 for all y in some neighbourhood of x. The support is always a closed set. Example 8.7. If ϕ(x) = 1 − x2 for |x| < 1 and ϕ(x) = 0 for |x| ≥ 1, then supp ϕ = [−1, 1]. Example 8.8. If ϕ is deﬁned by ϕ(x) = sin x for |x| < π and 0 elsewhere, then supp ϕ = [−π, π]. Although ϕ(0) = 0, the point x = 0 belongs to the support, because every neighborhood of this point contains points where ϕ(x) = 0. Saying that supp ϕ is compact means that ϕ(x) = 0 outside of some compact interval. The set of test functions on R with compact support is denoted by D. The fact that such functions exist may not appear obvious to some readers, but indeed there are a wealth of them. If the reader is not prepared to accept this fact, some examples are constructed at the end of this section. We shall also introduce a class of test functions situated between D and E, which is the most important class in our exposition of the theory. Deﬁnition 8.1 We say that a function ϕ belongs to the Schwartz class S if ϕ has derivatives of all orders and these satisfy inequalities of the form (1 + |x|)n |ϕ(k) (x)| ≤ Cn,k ,

x ∈ R,

where Cn,k are constants, for all integers n and k that are ≥ 0. The import of the deﬁnition is that ϕ and all its derivatives tend to zero as x → ±∞ faster than the inverted value of every polynomial. In particular, 2 D ⊂ S, but, in addition to this, S contains the function ϕ(x) = e−x (and lots of others). The class S is named after Laurent Schwartz, who founded the theory of distributions in the 1940s.

8.2 Fuzzy points – test functions

201

In connection with S, there is sometimes reason to talk about moderately increasing or tempered functions. These are functions χ that increase at most as fast as some polynomial, i.e., there are constants C and m such that |χ(x)| ≤ C(1 + |x|)m for all x. If χ belongs to E, if χ and all its derivatives are tempered, and if ϕ ∈ S, then the product χϕ will also belong to S. Such a function χ is called a multiplicator (more precisely, a multiplicator on the space S). The set of these multiplicators has no generally accepted notation, but we shall occasionally use the letter M for it. The sets D, S and E are vector spaces of inﬁnite dimension. We want to be able to speak about convergence of sequences of elements in these spaces. In Chapter 5 we saw examples of how convergence could be deﬁned by referring to various norms. The kind of convergence that we want now is more complicated to describe. Since our interest will be centered on the space S, we content ourselves with deﬁning convergence in this space. Deﬁnition 8.2 A sequence {ϕj }∞ j=1 ⊂ S is said to converge in S to a function ψ ∈ S, if for all integers n ≥ 0 and k ≥ 0 it holds that (k)

lim max(1 + |x|)n |ϕj (x) − ψ (k) (x)| = 0.

j→∞ x∈R

Thus, the functions ϕj and all their derivatives are to converge toward ψ and the respective derivatives of ψ in such a manner that the convergence is uniform even after multiplication by arbitrary polynomials in the variable x. This is quite a restrictive notion of convergence, but it turns out to be “correct” for our future needs. We write S

ϕj −→ ψ

as j → ∞.

Remark. The spaces E, S, and D contain many more functions than those that justify the name “fuzzy points.” It is, however, desirable to be able to work with linear spaces of test functions: and if such a space contains “fuzzy points” around all points x of the real axis, it will automatically contain a great number of functions that are not particularly “localized” (since a linear space is closed under addition and multiplication by scalars). For this reason, it is just as well to deﬁne test functions in the more generous way that we have done. The fact that there actually exist test functions with compact support may not be obvious to everybody. We shall give a few examples to show that this is actually the case. First we prove a lemma (which is often taken for granted by students without really thinking). Lemma 8.1 Suppose that f is continuous in [a, b] and diﬀerentiable in ]a, b[, and suppose that the derivative f (x) has a limit A, as x a. Then f has a right-hand derivative for x = a, and this derivative has the value A. Proof. The mean-value theorem of Lagrange can be used on the subinterval [a, a+ h], where h > 0: f (a + h) − f (a) = f (ξ) · h

⇐⇒

f (a + h) − f (a) = f (ξ), h

202

8. Distributions

y=ϕ(x)

FIGURE 8.1. where a < ξ < a + h. If we let h 0, the right-hand member of the last equation tends to A, by the assumption; thus, the left-hand member also has the limit A, and the limit of the left-hand member is, by deﬁnition, the right-hand derivative of f at a. Example 8.9. First deﬁne a function ϕ by putting

ϕ(x) =

x ≤ 0;

0,

e−1/x , x > 0.

The substitution 1/x = t and letting t → +∞, corresponding to x 0, shows that ϕ is continuous also at x = 0. For x > 0, a few diﬀerentiations give ϕ (x) = e−1/x ·

1 , ϕ (x) = e−1/x x2

1 2 − x4 x3

, ϕ (x) = e−1/x

1 6 6 − + x6 x5 x4

.

From this, one should realize that all the derivatives will have the form e−1/x multiplied by a polynomial in the variable 1/x. The limit as x 0 will in all cases be 0. According to the lemma, ϕ has then right-hand derivatives of all orders equal to 0 at the origin. The left-hand derivatives are also 0, trivially. This means that ϕ is indeﬁnitely diﬀerentiable everywhere and its support is the interval [0, ∞[. See Figure 8.1 ! Now deﬁne ψ(x) = ϕ(x) ϕ(1 − x). This is a C ∞ function with support [0, 1]. For the ψ of the example we thus have ψ ∈ D. Other elements of D can be constructed by translations, dilatations, multiplication by arbitrary functions in E, addition, etc. In fact, D is quite a rich space. 1 The function ψ, after division by the number B = 0 ψ(x) dx, can be interpreted as a “fuzzy point,” localized around x = 12 . If we translate the localization to the origin by forming ω(x) = ψ(x − 21 )/B and then re-scale according to the model nω(nx), we do indeed obtain a positive summation kernel as in Sec. 2.4, which becomes less and less fuzzy as n increases. Example 8.10.

With ψ and B as before, let 1 Ψ(x) = B

x

ψ(y) dy. −∞

This gives a function in E, having the value 0 for x ≤ 0 and 1 for x ≥ 1. Then put Ω(x) = Ψ(x) − Ψ(x − 1). Then Ω ∈ D, with support [0, 2]. Furthermore, Ω

8.3 Distributions

203

1

FIGURE 8.2. has the following property: Φ(x) ≡

∞

Ω(x − n) = 1

for all x ∈ R.

n=−∞

This can be shown in the following way (compare Figure 8.2). For any ﬁxed x, at most two terms in the sum are diﬀerent from zero, and so the series is very much convergent. Furthermore, it is easy to see that Φ(x + 1) = Φ(x), so that Φ has period 1. Thus we can restrict our study to the interval 1 ≤ x < 2. For these x, the sum reduces to the terms Ω(x) + Ω(x − 1), and we get Φ(x) = Ω(x) + Ω(x − 1) = Ψ(x) − Ψ(x − 1) + Ψ(x − 1) − Ψ(x − 2) = Ψ(x) − Ψ(x − 2) = 1 − 0 = 1. Example 8.10 shows that the function that is identically 1 for all real x can be decomposed as a sum of inﬁnitely diﬀerentiable functions with compact supports. Such a representation of 1 is called a partition of unity.

Exercise 8.1 Show that if ϕ ∈ S, then also ϕ ∈ S. Is the converse true: i.e., must an antiderivative of a test function in S also be in the same set?

8.3 Distributions Distributions are mappings that assign to every test function in some space a complex number. If f is a distribution, we denote this value for a test function ϕ by writing f [ϕ], using square brackets. (In literature one often sees the notation f, ϕ, but we shall avoid this, since it does not completely share the properties of the inner product in previous chapters.) Depending on which space of test functions one chooses, one gets diﬀerent classes of distributions. In connection with Fourier analysis, it turns out that the space S is the most natural one. The distributions belonging to these test functions are called tempered distributions. Deﬁnition 8.3 A tempered distribution f is a mapping f : S → C having the properties

204

8. Distributions

(1) linearity: f [c1 ϕ1 + c2 ϕ2 ] = c1 f [ϕ1 ] + c2 f [ϕ2 ] for all ϕk ∈ S and scalars ck ; S

(2) continuity: if ϕj −→ ψ as j → ∞, then also lim f [ϕj ] = f [ψ]. j→∞

The set of all tempered distributions is denoted S . We give some examples. Example 8.11. Let f be a continuous function on R such that there are constants M and m such that |f (x)| ≤ M (1 + |x|)m for all x. Then we can deﬁne a tempered distribution Tf by letting Tf [ϕ] = f (x) ϕ(x) dx. R

It is clear that Tf is a linear mapping; the fact that it is continuous follows from the fact that convergence in S implies uniform convergence even after multiplication by expressions such as (1 + |x|)m+2 : |Tf [ϕj ] − Tf [ψ]| = f (x)(ϕj (x) − ψ(x)) dx R ≤ M (1 + |x|)m |ϕj (x) − ψ(x)| dx R dx M (1 + |x|)m+2 |ϕj (x) − ψ(x)| · = (1 + |x|)2 R dx ≤ M max (1 + |x|)m+2 |ϕj (x) − ψ(x)| · →0 2 x∈R R (1 + |x|) as j → ∞. It is customary to identify the distribution Tf with the function f and write f [ϕ] instead of Tf [ϕ]. In this way, every continuous, moderately increasing function can be considered to be a distribution, and it is in this way that distributions can be seen as generalizations of ordinary functions. It is not necessary that the f in Example 8.11 be continuous. It is suﬃb cient that it is locally integrable, i.e., that a |f (x)| dx exists and is ﬁnite for all compact intervals [a, b]; on the other hand, it cannot be allowed to grow too fast as |x| → ∞. An important distribution of this type is exhibited in the next example: Example 8.12.

Let H be the Heaviside function, deﬁned by H(x) = 0 if x < 0,

H(x) = 1 if x > 0.

(The value of H(0) is immaterial.) This deﬁnes a distribution by the formula ∞ H[ϕ] = H(x) ϕ(x) dx = ϕ(x) dx. R

0

8.3 Distributions

205

Example 8.13. Deﬁne δ ∈ S by δ[ϕ] = ϕ(0). (The reader is asked to check linearity and continuity.) This distribution is called the Dirac distribution (Dirac function, Dirac measure), and this is the object announced in Examples 8.2 and 8.3. If f is an arbitrary distribution, as a rule there exists no “value at the point x” to be denoted by f (x). In spite of this, one often writes the eﬀect of f on a test function ϕ as an integral: f [ϕ] = f (x) ϕ(x) dx. R

This is indeed a very symbolic notation, but, nevertheless, it turns out to be quite useful. The whole theory develops in such a way that those suggestions that are invoked by the integral symbolism will be “correct.” As an example, one writes δ(x) ϕ(x) dx. ϕ(0) = δ[ϕ] = R

If we symbolically translate the δ function and write δ(x − a), the ordinary rules for changing variables yield δ(x − a) ϕ(x) dx = δ(y) ϕ(y + a) dy = ϕ(y + a) y=0 = ϕ(a). R

R

One often writes δa (x) = δ(x − a), so that δa is the distribution given by δa [ϕ] = ϕ(a). We include another few very mixed examples. Example 8.14. The mapping f that is deﬁned by 3 f [ϕ] = 3ϕ(2) − 4ϕ (2) + 7ϕ(8) (π) + ϕ (x) cos 7x dx 2

is a tempered distribution.

Example 8.15. The function 1/x cannot play the role of f in Example 8.11, since the integral will be divergent at the origin, However, we can deﬁne f [ϕ] using a symmetric limit: −ε ∞ ϕ(x) ϕ(x) + f [ϕ] = lim dx = lim dx ε0 ε0 x x −∞ ε |x|>ε

= lim

ε0

ε

∞

ϕ(x) − ϕ(−x) dx. x

The integral converges because the integrand in the last version has a ﬁnite limit as x 0, namely, 2ϕ (0). It is not diﬃcult to prove that the formula

206

8. Distributions

actually deﬁnes a tempered distribution. This distribution is commonly called P.V.1/x, where P.V. stands for principal value, which means the symmetric limit in the formula. 2

Example 8.16. If f (x) = ex , then f does not describe a tempered distribution according to Example 8.11. Indeed, if we choose the test function 2 ϕ(x) = e−x , which clearly belongs to S, the integral will diverge. The function f increases too fast. Remark. If, instead of S, one starts with the test function sets D or E (with suitable deﬁnitions of convergence, which are omitted here), one obtains other classes of distributions. Starting from D, consisting of test functions with compact sup port, one gets the class D of, simply, distributions. These comprise the tempered distributions as a subset, but also lots of others. For example, the function f in Example 8.16 deﬁnes such a general distribution. If one starts with E — i.e., all C ∞ functions are included among the test functions — one gets a more restricted set E , consisting of all distributions with compact support, which is deﬁned in the next section.

Exercises 8.2 Show that f (x) = ln |x| deﬁnes a distribution according to Example 8.11. (What has to be proved is essentially that f is locally integrable.)

8.3 Which of the following formulae deﬁne elements of S ? 2 (a) f [ϕ] = (2x + 3)ϕ (x) dx, (b) f [ϕ] = ex ϕ(x) dx, R

(c) f [ϕ] = (ϕ(0))2 .

R

8.4 Properties We are going to introduce some fundamental notions describing various properties of tempered distributions. (In the interest of brevity, we shall mostly omit the word “tempered.”) Two distributions f and g are equal (or globally equal), if f [ϕ] = g[ϕ] for all ϕ ∈ S. For f, g ∈ S , the sum f + g is deﬁned by (f + g)[ϕ] = f [ϕ] + g[ϕ] for all ϕ ∈ S. If c is a scalar (a complex number), then cf is the distribution that is described by (cf )[ϕ] = c · f [ϕ]. With these operations, S itself becomes a linear space. A distribution f is zero on an open interval I =]a, b[, if f [ϕ] = 0 for all ϕ ∈ S that have supp ϕ ⊂ I. Two distributions f and g are equal on an open interval I if f − g is zero on I. For example, δ = 0 on the interval ]0, ∞[.

8.4 Properties

207

If f and g are ordinary functions, equality on I means that f (x) = g(x) for all x ∈ I except possibly for a set of measure zero (a zero set, cf. page 89). Just as in Chapter 5, we consider such functions to be equivalent (or, loosely speaking, to be the same). The support supp f of a distribution f should be the smallest closed set where, loosely speaking, it really does matter what values are taken by the test functions; more precisely, a point x does not belong to the support if there is a neighborhood (an open interval) around x where f is zero. The support is always a closed set. Example 8.17. For a distribution that is a continuous function, f [ϕ] = f ϕ dx, the support of f as a distribution coincides with the support of R f as a function. If f is discontinuous, the expression “f is zero” in the deﬁnition above should be changed to “f is zero except possibly for a set of measure zero”. Example 8.18. With the notation of Sec. 8.3, supp H = [0, ∞[, supp δ = {0}, supp δa = {a}. The support of the distribution in Example 8.14 is the set [2, 3] ∪ {π}. If χ is a multiplicator function and f ∈ S , we can deﬁne the product χf ∈ S by putting (χf )[ϕ] = f [χϕ] for all ϕ ∈ S. (Check that this is reasonable if f is an ordinary function, and that χf actually turns out to be a tempered distribution!) Example 8.19. What is the product χδ ? According to the deﬁnition we have (χδ)[ϕ] = δ[χϕ] = χ(0) ϕ(0) = χ(0) · δ[ϕ]. This result is often written in the form χ(x)δ(x) = χ(0)δ(x). In the same way one sees that in general χ(x)δ(x − a) = χ(a)δ(x − a).

(8.1)

Example 8.20. Let f be P.V.1/x, and χ(x) = x. What is χf ? Indeed, ϕ(x) x· ϕ(x) dx χf [ϕ] = f [χϕ] = lim dx = lim ε0 |x|>ε ε0 |x|>ε x ∞ = ϕ(x) dx = 1 · ϕ(x) dx. −∞

R

We see that χf can be identiﬁed with the function which is identically 1, which we write simply as x · P.V.1/x = 1.

208

8. Distributions

Now, at last, we arrive at the promised generalization of the notion of a derivative. The starting point is the formula for integration by parts:

b

f (x) ϕ(x) dx = f (b)ϕ(b) − f (a)ϕ(a) −

a

b

f (x) ϕ (x) dx.

a

If f is a moderately increasing function of class C 1 , and ϕ ∈ S, we can let a → −∞ and b → ∞. The contributions at a and b will both tend to zero, and we are left with f (x) ϕ(x) dx = − f (x) ϕ (x) dx. R

R

This inspires the following deﬁnition: Deﬁnition 8.4 If f ∈ S , a new tempered distribution f is deﬁned by f [ϕ] = −f [ϕ ]

for all ϕ ∈ S.

We call f the derivative of f . It is not hard to check that actually f ∈ S ; here we proﬁt from the rigorous conditions that we have placed upon our test functions! Let us investigate some common cases. If f ∈ C 1 (R), the new derivative will coincide with the old one. But now, functions that did not have a derivative in the traditional sense will ﬁnd themselves to have one, this being a distribution rather than an ordinary function. Also, the deﬁnition of the derivative can be iterated any number of times, and we ﬁnd that all f ∈ S suddenly are endowed with derivatives of all orders! Example 8.21. Find the derivative of the Heaviside function H ! By deﬁnition, it should emerge from the following calculation: ∞ ∞ H [ϕ] = −H[ϕ ] = − ϕ (x) dx = − ϕ(x) x=0 = −(0 − ϕ(0)) 0

= ϕ(0) = δ[ϕ]. We see that H = δ, the derivative of the Heaviside function is the Dirac “function.” The latter is commonly illustrated graphically by a “spike” (see Figure 8.3). In general, it can be seen that the derivative of a jump of size c at a point x = a is given by cδa (or cδ(x − a) ). Example 8.22. Find the derivatives of δ: δ [ϕ] = −δ[ϕ ] = −ϕ (0),

δ [ϕ] = −δ [ϕ ] = δ[ϕ ] = ϕ (0).

In general, δ (n) [ϕ] = (−1)n ϕ(n) (0).

8.4 Properties

209

2δ−2 δ

0

x

1

− 32 δ3 FIGURE 8.3.

Example 8.23. What is the derivative of χf , where χ belongs to M and f ∈ S ? On the one hand, (χf ) [ϕ] = −(χf )[ϕ ] = −f [χϕ ], and on the other, (χ f + χf )[ϕ] = (χ f )[ϕ] + (χf )[ϕ] = f [χ ϕ] + f [χϕ] = f [χ ϕ] − f [(χϕ) ] = f [χ ϕ] − f [χ ϕ + χϕ ] = −f [χϕ ]. (Give some thought to what motivates each individual equality sign in these calculations!) One can see that the distributions (χf ) and χ f + χf have the same eﬀect on arbitrary test functions; thus we have proved the rule (χf ) = χ f + χf

if χ is moderately increasing and f ∈ S .

In calculations involving functions that are deﬁned by diﬀerent formulae in diﬀerent intervals, it is practical to make use of translated Heaviside functions. If a < b, the expression H(t − a) − H(t − b) is equal to 1 for a < t < b and equal to 0 outside the interval [a, b]. It might be called a “window” that lights up the interval (a, b) (we do not in these situations care much about whether an interval is open or closed). For unbounded intervals we can also ﬁnd “windows”: the function H(t − a) lights up the interval (a, ∞), and the expression 1 − H(t − b) the interval (−∞, b). Example 8.24. Consider the function f : R → R that is given by 2 1 − t for t < −2, f (t) = t + 2 for − 2 < t < 1, 1 − t for t > 1.

210

8. Distributions

This can now be compressed into one formula: f (t) = (1 − t2 )(1 − H(t + 2)) + (t + 2)(H(t + 2) − H(t − 1)) +(1 − t)H(t − 1) 2

= (1 − t ) + (−1 + t2 + t + 2)H(t + 2) + (−t − 2 + 1 − t)H(t − 1) = 1 − t2 + (t2 + t + 1)H(t + 2) − (2t + 1)H(t − 1). Example 8.25. The function f (x) = |x2 − 1| can be rewritten as f (x) = (x2 − 1)H(x − 1) + (1 − x2 )(H(x + 1) − H(x − 1)) +(x2 − 1)(1 − H(x + 1)) 2 = (x − 1) 2H(x − 1) − 2H(x + 1) + 1 . This formula can be diﬀerentiated, using the rule for diﬀerentiating a product: f (x) = 2x 2H(x − 1) − 2H(x + 1) + 1 + (x2 − 1) 2δ(x − 1) − 2δ(x + 1) = 2x 2H(x − 1) − 2H(x + 1) + 1 . In the last step, we used the formula (8.1). One more diﬀerentiation gives f (x) = 2 2H(x − 1) − 2H(x + 1) + 1 + 2x 2δ(x − 1) − 2δ(x + 1) = 2 2H(x − 1) − 2H(x + 1) + 1 + 4δ(x − 1) + 4δ(x + 1). The ﬁrst term contains the classical second derivative of |x2 − 1|, which exists for x = ±1; the two δ terms demonstrate that f has upward jumps of size 4 for x = ±1. See Figure 8.4. Example 8.26. Let a > 0 and b be real constants. If f ∈ S , deﬁne g by g(x) = f (ax + b). This means that (using symbolic integrals) y − b dy x − b dx g[ϕ] = f (ax+b)ϕ(x) dx = f (y) ϕ = f (x) ϕ , a a a a (8.2) i.e., 1 x−b . g[ϕ] = f x → ϕ a a What connection holds between the derivatives of f and g ? By the deﬁnition of g we should have g [ϕ] = −g[ϕ ] = − f (ax + b)ϕ (x) dx.

8.4 Properties

◦

1 1

2

◦

◦

1 ◦

◦

2

211

◦

1 ◦

◦

f f

f

FIGURE 8.4.

What is the eﬀect of the distribution h that is symbolically written h(x) = af (ax + b) ? Well, using the same change of variable as in (8.2) we get x − b dx h[ϕ] = a f (ax + b)ϕ(x) dx = a f (x) ϕ a a x−b dx, = f (x) ϕ a and the deﬁnition of f then yields x−b 1 x−b d ϕ dx = − f (x) ϕ dx, h[ϕ] = − f (x) dx a a a which, after a change of variable, proves to be − f (ax + b) ϕ (x) dx. If a < 0, the computations are analogous (there will occur a couple of minus signs that cancel in the end). We have then proved that the formula g (x) = af (ax + b) holds even for distributions. (In fact, the chain rule will hold also for more general changes of variable than these, but we will not delve deeper into this. Too “general” changes of variable may lead us out of the spaces S and S where we have chosen to stay in this exposition.) Using the new notion of derivative, we have now a solution of the old trouble with the wave equation, c2 uxx = utt . If we let f and g be two functions on R and form u(x, t) = f (x − ct) + g(x + ct), we can take derivatives of f and g in the distribution sense. Using the chain rule as in Example 8.26 it is seen immediately that u satisﬁes the equation. In what follows we shall need the following result.

212

8. Distributions

Theorem 8.1 If f ∈ S , then f = 0 if and only if f is a constant function. To prove the theorem we need a lemma. Lemma 8.2 A test function ϕ ∈ S is the derivative of another function in S if and only if R ϕ(x) dx = 0. Clearly, if ϕ = Φ , then ϕ = Φ(∞) − Φ(−∞) = 0, so the hard part is to prove the converse statement. If ϕ = 0, we can deﬁne a primitive function Φ by ∞ x ϕ(y) dy = − ϕ(y) dy. Φ(x) = −∞

x

Obviously, Φ is inﬁnitely diﬀerentiable, for Φ(k) = ϕ(k−1) , and estimates of these derivatives are no problem. What remains is to show that the function itself tends to zero quickly enough. However, if n is an integer, we do know that |ϕ(y)| ≤ C/(1 + |y|)n+2 for some C, and for x ≥ 0 we then have ∞ C dy (1 + |x|)n |Φ(x)| ≤ (1 + |x|)n (1 + |y|)n+2 x n ∞ C dy (1 + |x|) ≤ ≤ C1 . n (1 + |x|) x (1 + |y|)2 For x < 0, we can do the analogous thing to the other one of the integrals that deﬁne Φ. This shows that Φ ∈ S , and the lemma is proved. Proof of Theorem 8.1. Saying that f is the constant c means that f is identiﬁed with the diﬀerentiable function f (x) = c; in this case, the new derivative coincides with the traditional one, so that f = 0. The converse is harder. Assume that f = 0. Then f [ϕ ] = −f [ϕ] = 0 for all ϕ ∈ S.

(8.3)

However, we must know what f does to an arbitrary test function. Let ψ0 be a ﬁxed test function such that ψ0 (x) dx = 1. For an arbitrary ϕ ∈ S, put A = ϕ(x) dx. Then ϕ − Aψ0 is a test function with integral 0, and by the lemma it is the derivative of some function belonging to S. Put c = f [ψ0 ]. Using (8.3) we ﬁnd that 0 = f [ϕ − Aψ0 ] = f [ϕ] − Af [ψ0 ] = f [ϕ] − ϕ(x) dx · f [ψ0 ] = f [ϕ] − c ϕ(x) dx, and it follows that f [ϕ] = cϕ(x) dx, which means that f can be identiﬁed with the constant c. Let fj ∈ S for j = 1, 2, 3, . . .. Suppose that g ∈ S has the property that limj→∞ fj [ϕ] = g[ϕ] for all ϕ ∈ S. Then we say that the sequence

8.5 Fourier transformation

213

{fj } converges in S to g, which we write as fj → g or, when precision is S

needed, fj −→ g. This sort of convergence is clearly simple and natural. An immediate consequence is that every positive summation kernel (Sec. 2.4) converges to the Dirac distribution. Remark. A curious reader is probably missing one operation among the deﬁnitions that we have made: multiplication. It turns out, however, that it is not possible to deﬁne the product of two distributions in general. It is possible to multiply certain couples, but other products cannot be given a meaningful interpretation. In this text we have treated a simple case: the product of a so-called multiplicator function and a distribution. This case will be suﬃcient for our present needs.

Exercises 8.4 Show that x2 δ = 6δ . 8.5 Prove the following formula: χ(x)δ (x − a) = χ(a)δ (x − a) − χ (a)δ(x − a). 8.6 Find the third derivative of |x3 − x2 − x + 1|. 8.7 Show that the distributional derivative of ln |x| is P.V.(1/x). 8.8 Show that the derivative of f = P.V.(1/x) is described by the formula

f [ϕ] = − lim

ε0

|x|≥ε

ϕ(x) − ϕ(0) dx. x2

8.9 Consider Exercise 2.20, page 25. Interpret this exercise as a result in distribution theory. Sketch the graph of the “kernel” occurring in the problem.

8.5 Fourier transformation If ϕ ∈ S, it is certainly true that ϕ ∈ L1 (R), and in addition ϕ(k) ∈ L1 (R) for all k ≥ 1. This means that ϕ and all its derivatives have Fourier transforms: (k) (ω) = ϕ/ ϕ(k) (x) e−iωx dx. R

Integrating by parts and using the fact that ϕ(m) (x) decreases rapidly as x → ±∞, one can see that k / (k) ϕ (ω) = (−1) ϕ(x) Dxk e−iωx dx = (iω)k ϕ(ω). ' R

(k)

Since the transform of ϕ is bounded (Theorem 7.1), it follows that |ω|k |ϕ(ω)| ' ≤ Ck , i.e., ϕ ' decreases at least as fast as 1/|ω|k at inﬁnity; and this is true for all k ≥ 0. Furthermore, we can form the derivative of ϕ: ' dn ϕ(ω) ' = ϕ(x) (−ix)n e−iωx dx, dω n R

214

8. Distributions

where diﬀerentiation under the integral sign is allowed because the resulting integral converges uniformly (again we use that ϕ(x) is small when |x| is large). Thus, ϕ ' ∈ C ∞ . But on the last integral we can again apply the same procedure as above to see that the derivatives also decrease rapidly as ω → ±∞. Collecting our results, we have proved part of the following theorem. Theorem 8.2 The Fourier transformation F is a continuous bijection of the space S onto itself. In plain words: if ϕ ∈ S on the x-axis, then F(ϕ) = ϕ ' ∈ S on the ω-axis, and every function ψ(ω) belonging to S is the Fourier transform of some function ϕ ∈ S. The latter statement follows from the fact that if ψ(ω) belongs to S, then one can form the inverse Fourier transform ϕ of ψ: 1 ϕ(x) = ψ(ω) eixω dω. (8.4) 2π R ' Just as in the argument before the theorem, one sees that ϕ will be a member of S on the x-axis and that the Fourier inversion formula gives that ϕ ' = ψ. The fact that the Fourier transformation is a continuous mapping from S S ' We omit the details of 0j −→ ψ. S to S means that if ϕj −→ ψ, then also ϕ the proof of this fact; essentially it hinges on the fact that the expressions max(1 + |ω|)n |0 ϕj ' ω∈R

(k)

(ω) − ψ'(k) (ω)| (n)

can be estimated by the corresponding expressions for (1+|x|)k |ϕj −ψ (n) |. (Roughly speaking, diﬀerentiation on one side corresponds to multiplication by the variable on the other side.) Again we stress that if ϕ ∈ S, then the Fourier inversion formula (8.4) will always hold. There are no convergence problems for the integral, since ϕ(ω) ' tends rapidly to zero at both inﬁnities. The deﬁnition of S is tailored so that the Fourier transformation shall have all these nice properties. Now we want to deﬁne the Fourier transform of a distribution. As a preparation, we do a “classical” calculation. Assume that f (x) and g(ω) are functions belonging to L1 , each on its own axis: |f (x)| dx < ∞, g1 = |g(ω)| dω < ∞. f 1 = ' R R The Fourier transforms f' and g' both exist: −iωx ' f (ω) = f (x) e dx, g'(x) = g(ω) e−ixω dω, ' R R and they satisfy the inequalities |f'(ω)| ≤ f 1 and |' g (x)| ≤ g1 . The function f (x) g(ω) e−ixω will then be absolutely integrable over the plane

8.5 Fourier transformation

215

' and the integral can be computed by iteration in two ways. This R × R, gives the identity f (x) g(ω) e−ixω dx dω = f (x) g'(x) dx = f'(ω) g(ω) dω. ' R R ' R×R The equality of the two last members is our inspiration. It is, for example, true if g = ϕ ∈ S and f is any L1 function. We extend its domain of validity in the following deﬁnition. Deﬁnition 8.5 The Fourier transform of f ∈ S is the distribution f' that is deﬁned by the formula f'[ϕ] = f [ϕ] '

for all ϕ ∈ S.

Just as in Chapter 7, we shall also write f' = F(f ) (but now we use ordinary brackets instead of square ones, in order to avoid confusing it with the notation f [ϕ]). Remark. The equality f ' g = f'g is sometimes considered to be a variant of the polarized version of the Plancherel formula.

We proceed to check that f' is actually a tempered distribution. It is clear that it is linear: f'[c1 ϕ1 + c2 ϕ2 ] = f (c1 ϕ1 + c2 ϕ2 )∧ = f [c1 ϕ 01 + c2 ϕ 02 ] ' ' = c1 f [0 ϕ1 ] + c2 [0 ϕ2 ] = c1 f [ϕ1 ] + c2 f [ϕ2 ]. The continuity is a simple consequence of the continuity of the Fourier S transformation on S: if ϕj −→ ψ, then ' = f'[ψ], ϕj ] → f [ψ] f'[ϕj ] = f [0 which tells us precisely that f' is continuous, and thus a distribution. Let us compute the Fourier transforms of some distributions. We start with a few examples that are ordinary functions, but do not belong to L1 (R). Example 8.27. Let f (x) = 1 for all x. What is the Fourier transform f'? We should have f (x) ϕ(x) ' dx = ϕ(x) ' dx f'[ϕ] = f [ϕ] ' = R R 1 = 2π · ϕ(x) ' ei0x dx = 2πϕ(0) = 2πδ[ϕ]. 2π R It follows that f' = 2π δ, or f'(ω) = 2π δ(ω) if we want to stress the name of the independent variable. (Notice that the test functions and their transforms have reversed independent variables in this connection!)

216

8. Distributions

Example 8.28. Take f (x) = xn (n integer ≥ 0). This function deﬁnes a tempered distribution, and its transform satisﬁes xn ϕ(x) ' dx. f'[ϕ] = f [ϕ] ' = R

By the ordinary rules for Fourier transforms we have that (ix)n ϕ(x) ' is the ' is the transform transform of the function ϕ(n) , which means that xn ϕ(x) of (−i)n ϕ(n) . The inversion formula then gives that f'[ϕ] = 2π(−i)n ϕ(n) (0). In the preceding section we saw that the nth derivative of δ is described by δ (n) [ϕ] = (−1)n ϕ(n) (0). Thus we must have f' = 2πin δ (n) . Before giving further examples we present a list of rules of computation, which on the face look quite familiar, but now are in need of new proofs. To simplify the formulation, we introduce two new notations. First, if f ∈ S , then fˇ is what could be symbolically written as f (−x); more precisely, we deﬁne fˇ[ϕ] = f (x)ϕ(−x) dx. We say that f is even if fˇ = f , odd if fˇ = −f . Secondly, if a ∈ R and ϕ ∈ S, we deﬁne the translated function ϕa by ϕa (x) = ϕ(x − a). For f ∈ S the translated distribution fa is f (x − a), which means fa [ϕ] = f (x)ϕ(x + a) dx = f [ϕ−a ]. (This notation is a generalization of the notation δa to arbitary distributions.) Theorem 8.3 If f, g ∈ S , then (a) f is even/odd ⇐⇒ f' is even/odd. 0 ' (b) f=2π fˇ. (c) f'a = e−iaω f'. (d) F(eiax f ) = f' a . (e) f' = iω f'. 0 = i f' . (f) xf Proving these formulae are excellent exercises in the deﬁnitions of the notions involved. As examples, we perform the proofs of rules (d) and (e): (d): The eﬀect of the left-hand member on a test function ϕ is rewritten: F(eiax f )[ϕ] = (eiax f )[ϕ] ' = f [eiax ϕ] ' = f [F(ϕ−a )] = f'[ϕ−a ] = (f')a [ϕ]. Each equality sign corresponds to a deﬁnition or a theorem: the ﬁrst one is the deﬁnition of the Fourier transform; the second one is the deﬁnition of the product of a function and a distribution; the third one is a rule for “classical” Fourier transforms; the fourth is again the deﬁnition of the Fourier transform; and the last one is the deﬁnition of the translate of a distribution.

8.5 Fourier transformation

217

(e) is proved similarly; the reader is asked to identify the reason for each equality sign in the following formula: ' = −f [(ϕ) ' ] = −f [F(−iωϕ)] = f [F(iωϕ)] = f'[iωϕ] f' [ϕ] = f [ϕ] = (iω f')[ϕ]. We proceed to give more examples of transforms of distributions. Example 8.29. Transform f = P.V.1/x (Example 8.15, page 205): we have seen that xf = 1. Transformation gives iDf' = 2πδ = 2πH , which can be rewritten as iD(f' + 2πiH) = 0. By Theorem 8.1 it follows that f'+ 2πiH = c = constant, whence f' = c − 2πiH. To determine the constant we notice that f is odd, and thus f' must also be odd. This gives c = πi and f' = πi(1 − 2H). If we introduce the function sgn x = x/|x| (the sign of x), we can write the result as f' = −πi sgn x. Example 8.30. H = the Heaviside function. In Example 8.29 we saw that 1 F P.V. (ω) = πi(1 − 2H(ω)). x Since both sides are odd distributions, rule (b) gives

1 πiF(1 − 2H)(ω) = 2π P.V. ω

∨

1 = −2πP.V. . ω

' = 2πδ − 2H. ' From this we can On the other hand, F(1 − 2H) = ' 1 − 2H solve ' = πδ(ω) − iP.V. 1 . H ω As a ﬁnale to this section we prove the following result. Theorem 8.4 If f ∈ S , then xf (x) is the zero distribution if and only if f = Aδ for some constant A. Proof. Transformation of the equation xf (x) = 0 gives if' = 0, and by Theorem 8.1 this means that f' = C, where C is a constant. Transform back again: since ' 1 = 2πδ, we ﬁnd that f must be a constant times δ, and the proof is complete. By translation of the situation in the theorem, it is seen that the following also holds: if f ∈ S and (x − a)f (x) = 0, then f = Aδa for some constant A. This can be further generalized. If χ is a multiplicator function that has a simple zero at the point x = a, and χf = 0, then f = Aδa . The proof is

218

8. Distributions

built on writing χ(x) = (x−a)ψ(x), where ψ(a) = 0, and then the previous result is applied to the distribution ψf . A diﬀerent kind of generalization of Theorem 8.4 is given in Exercise 8.14. Exercises 8.10 Determine the Fourier transform of f (x) = e−x H(x). What is the transform of 1/(1 + ix) ? Of x/(1 − ix) ? 8.11 Let f1 = P.V.1/x. Deﬁne recursively fn for n = 2, 3, . . . by fn+1 = −fn /n. Prove that xn fn = 1 for n = 1, 2, 3, . . .. 8.12 Find the Fourier transform of x3 /(1 + x2 ) . 8.13 Find a tempered distribution f that solves the integral equation

∞

e−u f (t − u) du = H(t),

−∞ < t < ∞, t = 0.

0

Check your result by substituting into the equation.

8.14 Suppose that f ∈ S is such that xn f = 0 for an integer n. Prove that f is a linear combination of δ (k) , k = 0, 1, . . . , n − 1. 8.15 Let f be a function of moderate growth on R such that 1 f (x) = 2

1

f (x − t) dt

for all x ∈ R.

−1

(That is, f (x) is always equal to its mean value over the interval of length 2 with x in its middle.) Prove that f must be a polynomial of degree at most 1. (Hint: take Fourier transforms and use the result of the preceding exercise.)

8.6 Convolution Two test functions in S can always be convolved according to the recipe in Sec. 7.5, because the deﬁning integral f (x − y)g(y) dy = f (y)g(x − y) dy f ∗ g(x) = R

R

converges very nicely. But the operation of convolution can be extended to more general situations. If one of the functions is continuous and bounded, and the other one belongs to L1 (R), it works nicely, too. Now we shall take one of them to be a distribution and the other one a test function: thus let f ∈ S and ϕ ∈ S. By the convolution of f and ϕ we mean the function f ∗ϕ given by f ∗ ϕ(x) = f [ϕˇx ] = fy [ϕ(x − y)], where the subscript y indicates that the distribution acts with respect to the variable y. With a symbolic integral: f ∗ ϕ(x) = f (y)ϕ(x − y) dy.

8.6 Convolution

219

The convolution is thus an ordinary function of the variable x. One can also prove that it is inﬁnitely diﬀerentiable. This follows from the fact that for each ﬁxed x, the sequence of functions ψh , deﬁned by ϕ(x + h − y) − ϕ(x − y) , h will converge in the sense of S, as h → 0 (with the function y → ϕ (x − y) as the limit). (The veriﬁcation of this statement is somewhat complicated; it involves the notion of uniform continuity.) This implies that y → ψh (y) =

fy [ϕ(x + h − y)] − fy [ϕ(x − y)] f ∗ ϕ(x + h) − f ∗ ϕ(x) = = f [ψh ] h h → fy [ϕ (x − y)] = f ∗ ϕ (x). The reasoning can be iterated, and one ﬁnds that f ∗ ϕ has derivatives of all orders, that also satisfy Dn (f ∗ ϕ) = f ∗ ϕ(n) . What is the result of Fourier transforming a convolution of this type? The reader should be prepared for the answer. A proof of this runs along these lines: let ψ be an arbitrary test function: / ' ' ' dx dy, ϕ ∗ f [ψ] = ϕ ∗ f [ψ] = ϕ ∗ f (x) ψ(x) dx = ϕ(x − y) f (y) ψ(x) 1 ' ' / ' ϕ ' f'[ψ] = f'[ϕ ' ψ] = f [ϕ ' ψ] = f ϕ ' ∗ ψ = f [ϕˇ ∗ ψ] 2π ' dy] = ' dx dy. f (x) ϕ(y − x) ψ(y) = fx [∫ ϕ(y − x)ψ(y) Since ϕ/ ∗ f and ϕ 'f' have the same eﬀect on any test function, they are the same distribution. (The proof may seem defective inasmuch as certain integrals are “symbolic”, but this can be justiﬁed.) The deﬁnition of convolution can be extended further by going a roundabout way via the Fourier transform and the formula f ∗ g = F −1 (f'g'), but for this we refer to deeper texts. The Dirac distribution δ has a special relation to the convolution operation. As soon as the convolution is deﬁned, one has δ ∗ f = f . Indeed, if f is continuous, we have δ ∗ f (x) = δ(y)f (x − y) dy = [f (x − y)]y=0 = f (x). Algebraically, this means that δ is a unit element for the operation ∗. Exercises 8.16 Compute the convolution δ (n) ∗ f , where f is a function belonging to E. 8.17 Prove that f ∗ ϕ[ψ] = f [ϕ ˇ ∗ ψ], whenever f ∈ S and ϕ, ψ ∈ S . (This could be taken as an alternative deﬁnition of f ∗ ϕ.)

220

8. Distributions

−4π

−2π

0

2π

4π

x

FIGURE 8.5.

8.7 Periodic distributions and Fourier series The intention of this section is to give just a hint about how distribution theory actually can be used to unify the classical notions of Fourier series and Fourier transforms to make them special cases of one notion. A tempered distribution f is said to be periodic with period 2P , if f [ϕ] = f [ϕ2P ] for all ϕ ∈ S or, symbolically, f (x)ϕ(x) dx = f (x)ϕ(x − 2P ) dx for all ϕ ∈ S. Example 8.31. A simple example of a distribution with period 2π is the so-called pulse train (see Figure 8.5): X=

δ2πn

or X(x) =

n∈Z

δ(x − n · 2π).

n∈Z

That this is actually a tempered distribution hinges essentially on the fact that the sum ϕ(x + n · 2π) X[ϕ] = n∈Z

is convergent, which follows from the estimate |ϕ(x + n · 2π)| ≤ M/(1 + n2 ), which is true for all ϕ ∈ S (with wide margins). Let us investigate what the Fourier transform of a periodic distribution f should look like. For simplicity, we assume that the period is 2π, so that we have f2π = f . Direct transformation gives, using rule (c) in Theorem 8.3, f' = e−2πiω f'

⇐⇒

(1 − e−2πiω )f' = 0.

Evidently, for all ω such that e−2πiω = 1, f' must be zero; this holds for all ω = integer. At integer points ω = n, the factor 1 − e−2πiω has a simple zero, i.e., it behaves essentially like a nonzero constant times the factor (ω − n). Using Theorem 8.4 (in a “local” version) we see that f' has a point mass at ω = n, i.e., a multiple of δn . Thus we can write f' = γn δn or f'(ω) = γn δ(ω − n) n∈Z

for certain constants γn .

n∈Z

8.8 Fundamental solutions

221

In order to identify the coeﬃcients γn , we consider the particular case when f is a “nice” 2π-periodic function. Then f has a nicely convergent ordinary Fourier series, so that we can write π 1 f (x) = cn einx , cn = f (x) e−inx dx. 2π −π n∈Z

If it is permissible to form the Fourier transform term by term, we could use the fact that the transform of eiαx is 2πδα , and we would get cn · 2πδ(ω − n). f'(ω) = n∈Z

Thus it seems that the coeﬃcients of the pulse train that makes up f' are nothing but the classical Fourier coeﬃcients of f (multiplied by the factor 2π). Formally, the inversion formula for the periodic distribution f would look like this: 1 1 f (x) ∼ cn · 2πδ(ω − n) eixω dω f'(ω)eixω dω = 2π R 2π ' ' n∈Z R ixω inx = cn δn [e ] = cn e , n∈Z

n∈Z

i.e., the inversion formula is the ordinary Fourier series. All these calculations can in fact be justiﬁed, and this is done in more complete texts. It turns out that an arbitrary distribution f 2π-periodic has a Fourier series/transform of the form cn einx and 2π cn δn , respectively, where the coeﬃcients satisfy an equality of the form |cn | ≤ M (1 + |n|)k for some constants M and k; and, conversely, a pulse train with such coeﬃcients is the Fourier transform of some periodic distribution. Exercise 8.18 Find the Fourier transform of the pulse train X in Example 8.31.

8.8 Fundamental solutions Let P (r) be a polynomial in the variable r, with constant coeﬃcients. P (r) is the characteristic polynomial of the diﬀerential operator P (D), which can operate on functions or distributions: P (r) = an rn + an−1 rn−1 + · · · + a1 r + a0 , P (D) = an Dn + an−1 Dn−1 + · · · + a1 D + a0 , P (D)y = an y (n) + an−1 y (n−1) + · · · + a1 y + a0 y.

222

8. Distributions

For example, P (D) can be considered as a linear mapping S → S . If P (D) operates on a convolution f ∗ ϕ, where, say, f ∈ S and ϕ ∈ S, then the linearity and the rule for diﬀerentiation of a convolution imply that the result can be written P (D)(f ∗ ϕ) = (P (D)f ) ∗ ϕ = f ∗ (P (D)ϕ). Now suppose that E ∈ S is a distribution such that P (D)E = δ, and let f be an arbitrary continuous function. Then we have P (D)(E ∗ f ) = (P (D)E) ∗ f = δ ∗ f = f. Thus, if we have found such an E, we have a recipe for ﬁnding a particular solution of the diﬀerential equation P (D)y = f , where the right-hand member f is an arbitrary (continuous) function. One says that E is a fundamental solution of the operator P (D). Example 8.32. Let a > 0. Let us ﬁnd a fundamental solution of the familiar operator P (D) = D2 + a2 , i.e., we want to ﬁnd a distribution E such that E + a2 E = δ. Fourier transformation gives ' + a2 E ' = δ' = 1, (iω)2 E ' like and at least one solution of this ought to be found by solving for E this: 1 1 i 2 2 1 1 '= − = − . = E −ω 2 + a2 2a ω + a ω − a 4a i(ω + a) i(ω − a) (The two fractions in the last expression are interpreted as P.V.’s, as in Example 8.15.). We recognize that the Fourier transform of sgn t is 2/(iω), which gives y(t) =

i −iat 1 1 e sgn t − eiat sgn t = sgn t sin at = sin at · (2H(t) − 1). 4a 2a 2a

Just to be safe, we check by diﬀerentiating: 1 (a cos at(2H(t) − 1) + sin at · 2δ(t)) = 12 (cos at(2H(t) − 1)), 2a y (t) = 12 (−a sin at(2H(t) − 1) + cos at · 2δ(t)) a = − sin at · (2H(t) − 1) + δ(t) = −a2 y(t) + δ(t). 2 y (t) =

Exercise 8.19 Find fundamental solutions of the operators (a) P (D) = D−a, (b) P (D) = D2 + 3D + 2, (c) P (D) = D2 + 2D + 1, (d) P (D) = D2 + 2D + 2.

8.9 Back to the starting point

223

8.9 Back to the starting point We round oﬀ the chapter by looking back at the ﬁrst section, 8.1, where we presented a number of “problems.” Most of these have now found some sort of solution. Problem 8.1 was settled in Example 8.26: even an angular wave-shape has derivatives in the distributional sense, and these derivatives satisfy the wave equation. Problems 8.2–4 dealt with point charges of diﬀerent kinds; the solution, as we have seen throughout the chapter, is to make the δ notion legitimate by viewing it as a distribution. Problem 8.5 may be said to have been solved by the very idea of considering distributions as linear functionals on a space of test functions. There remains Problem 8.6. Let us ﬁrst take the heat problem with the unknown function u = u(x, t): uxx = ut , x ∈ R, t > 0;

u(x, 0) = f (x), x ∈ R.

We can now let f be a tempered distribution on R. Assume that for every ﬁxed t, the thing that is symbolically denoted by x → u(x, t) is a tempered distribution, and also assume that one can reverse the order of diﬀerentiation with respect to t and Fourier transformation with respect to x. If the Fourier transform of u with respect to x is denoted by U (ω, t), as in Sec. 7.7, we get the same transformed problem as we got there: −ω 2 U =

∂U , t > 0; ∂t

U (ω, 0) = f'.

This diﬀerential equation can be solved just as before, and we get U (ω, t) = 2 e−ω t · f', where the right-hand member is now a product of a test function and a tempered distribution. Transforming back again we get u(x, t) = E(x, t) ∗ f , which is a convolution of a test function and a tempered distribution, as in Sec. 8.6. An interesting fact is now that such a convolution is actually an ordinary function, and furthermore this function has derivatives of all orders that actually satisfy the heat equation. The initial values are the distribution f in the sense that S

u( · , t) −→ f

as t 0.

The Dirichlet problem in the half-plane, which was considered in Sec. 7.8, can be treated in a similar way. A minor complication is the fact that the Poisson kernel 1 y Py (x) = 2 π y + x2 is not a test function, but the deﬁnition of convolution in Sec. 8.6 can be extended to encompass this case as well.

224

8. Distributions

Summary of Chapter 8 Deﬁnition We say that a function ϕ belongs to the Schwartz class S if ϕ has derivatives of all orders and these satisfy inequalities of the form (1 + |x|)n |ϕ(k) (x)| ≤ Cn,k ,

x ∈ R,

where Cn,k are constants for all integers n and k that are ≥ 0. Deﬁnition A sequence {ϕj }∞ j=1 ⊂ S is said to converge in S to a function ψ ∈ S if for all integers n ≥ 0 and k ≥ 0 it holds that (k)

lim max(1 + |x|)n |ϕj (x) − ψ (k) (x)| = 0.

j→∞ x∈R

Deﬁnition A tempered distribution f is a mapping f : S → C having the properties (1) linearity: f [c1 ϕ1 + c2 ϕ2 ] = c1 f [ϕ1 ] + c2 f [ϕ2 ] for all ϕk ∈ S and scalars ck ; S

(2) continuity: if ϕj −→ ψ as j → ∞, then also lim f [ϕj ] = f [ψ]. j→∞

The set of all tempered distributions is denoted by S . Intuitively, a distribution on R is a sort of generalized function; it need not have ordinary function values, but somehow it lives on the axis, and its “global” behavior is a sort of sum of its “local behavior”. For example, the Dirac distribution δ is zero everywhere except at the origin, where it is in a certain sense inﬁnitely large. Deﬁnition If f ∈ S , a new tempered distribution f is deﬁned by f [ϕ] = −f [ϕ ]

for all ϕ ∈ S.

We call f the derivative of f . Theorem If f ∈ S , then f = 0 if and only if f is a constant function. Theorem The Fourier transformation F is a continuous bijection of the space S onto itself.

Historical notes

225

Deﬁnition The Fourier transform of f ∈ S is the distribution f' that is deﬁned by the formula f'[ϕ] = f [ϕ] ' for all ϕ ∈ S. If f ∈ S , then fˇ is what could be symbolically written as f (−x); more precisely, fˇ[ϕ] = f (x)ϕ(−x) dx. We say that f is even if fˇ = f , odd if fˇ = −f . If a ∈ R and ϕ ∈ S, we deﬁne the translated function ϕa by ϕa (x) = ϕ(x − a). For f ∈ S the translated distribution fa is f (x − a), which means fa [ϕ] = f (x)ϕ(x + a) dx = f [ϕ−a ]. Theorem If f, g ∈ S , then (a) f is even/odd ⇐⇒ f' is even/odd. ' (b) f' = 2π fˇ. (c) f'a = e−iaω f'. (d) F(eiax f ) = f' a . (e) f' = iω f'. 0 = i f' . (f) xf

Historical notes The notion of a point mass was imagined already by Isaac Newton (1642–1727) in his description of the laws of gravity. Many physicists and applied mathematicians, such as Oliver Heaviside, in the nineteenth century, used this and analogous concepts, with a varying sense of bad conscience, because they had no stringent mathematical formulation. Paul Dirac (1902–84), who won the Nobel Prize in Physics in 1933, discussed the problem closely and his name was associated to the object δ. A mathematically acceptable deﬁnition of distributions was given around the middle of the twentieth century by Laurent Schwarz (1915–2002). Simultaneously, a number of Russian mathematicians developed a similar theory in a quite diﬀerent way. They talked about generalized functions, deﬁned as limits of sequences of ordinary functions in a certain manner. It was soon discovered that the two deﬁnitions in fact give rise to equivalent notions. The deﬁnitions are easily extended to several dimensions, so that one talks about distributions on Rn . These objects have an enormous importance in the study of partial diﬀerential equations. There are also other sorts of generalizations to even more general objects, such as hyperfunctions. Research in the ﬁeld is intensive today.

226

8. Distributions

Problems for Chapter 8 If the star-marked sections in Chapters 2–7 have not been studied previously, the exercises there could now be looked up and solved. Here are another few problems. 2

5

8.20 Which of the following functions belong to S or/and M: e−x , e−|x| , sin(x2 ), xn (n integer), 1/(1 + x2 ). 8.21 Decide which of these functions can be considered as distributions: e2x , e−2x , e2x H(x), e−2x H(x), esin x , (x2 − 1)3 . 8.22 Find the ﬁrst and second derivatives (in the sense of distributions) of (a) xH(x), (b) |x|, (c) |x2 − x|. 8.23 Simplify f (x) = ψ(x)δ (x − a), where ψ ∈ M. 8.24 Compute f , where f (x) = | sin x|. Draw pictures of f , f , and f . 8.25 An electric charge q at a point a on the x-axis can be represented by q δ(x − a). Suppose that we have one charge n at the point 1/n and an opposite charge −n at the point −1/n. The “limit” of this system, as n → ∞, is called an electric dipole. Describe this limit as a distribution! 8.26 Find all tempered distributions f satisfying the diﬀerential equation f (x) + 2xf (x) = δ(x − 2). 8.27 Determine the Fourier transforms of (a) sin ax, (b) cos bx, (c) xn H(x) (n = 0, 1, 2, . . .), (d) δ(x − a) + δ(x + a), (e) xδ (x). 8.28 Let a > 0. Find the Fourier transforms of e−ax H(x) and eax (1 − H(x)) and ﬁnally of 1/(x + bi), where b is a real number. 8.29 Find a solution in the form of a tempered distribution of the problem y + a2 y = δ. Then show how this distribution can be used to construct a solution of the equation y + a2 y = f , where f is an “arbitrary” function (i.e., a function belonging to some suitable class).

9 Multi-dimensional Fourier analysis

In this chapter we give a sketch of what Fourier series and integrals look like in the multivariable case. There are almost no proofs. Sections 9.1–2 tackle the problem of summing a series when the terms have no natural sequential order, which happens as soon as they are numbered in some other way than by index sequences such as 1, 2, 3, . . . and similar sequences. In the next few sections we indicate what the Fourier analysis looks like. The intention behind these sections is to provide a sort of moral support for a student who comes across, say, in his physics studies, such things as Fourier transforms taken over all of 3-space – here a real mathematician is saying that these things do exist and can be used! We have not included anything about distributions. This would have gone far beyond the intended scope of this book. But the interested reader should know that distributions in Rn are an extremely useful tool, and the theory of these objects is both beautiful and exciting. Those who are interested should go on to some of the books mentioned in the bibliography.

9.1 Rearranging series In this section we presuppose that the reader is acquainted with the elements of the theory of numerical series. By this we mean notions such as convergence, absolute convergence, and comparison tests. As is well known, if we want to compute the sum of ﬁnitely many terms, the order in which the terms are taken does not matter: 1 + 2 + 3 + 4 + 5 = 4 + 1 + 5 + 3 + 2.

228

9. Multi-dimensional Fourier analysis

This need not be the case when there are inﬁnitely many terms, i.e., when the sum is a series. Example 9.1. The series ∞ (−1)k+1

k

k=1

=1−

1 2

+

1 3

−

1 4

+

1 5

−

1 6

+ ···

is convergent according to the so-called Leibniz test and has a certain sum s > 12 (it can actually be shown that s = ln 2). If we rearrange the terms so that each positive term is followed by two negative terms, so that we try to sum 1−

1 2

−

1 4

+

1 3

−

1 6

−

1 8

+

1 5

−

1 10

−

1 12

+

1 7

−

1 14

−

1 16

+ ···,

it is rather easy to show that the partial sums now tend to s/2 = s. The reason things can be as bad as in the example is the following: If we add those terms of the original series that are positive, which means that we write 1 1 + 13 + 15 + 17 + · · · + 2k−1 + ···, we get a divergent series; in like manner the negative terms also make up a divergent series: − 12 −

1 4

−

1 6

−

1 8

− ··· −

1 2k

− ···.

This means that the sum of the original series is really an expression of the type “∞ − ∞”: there is an inﬁnity of “positive mass” and an inﬁnity of “negative mass.” Actually, it is not very diﬃcult to describe a process that can assign any given number as the sum of such a series, by taking the terms in a suitable order. It can also be made to diverge in various diﬀerent ways. Se Exercise 9.1 below. ∞ ∞ A convergent series k=1 ak of this type, i.e., such that k=1 |ak | is divergent (= +∞, as it is often written), is said to be conditionally convergent. The alternative is an absolutely convergent series. For such a series the troubles indicated above cannot happen. We are going to prove a theorem about this. First we want to give a proper deﬁnition of a rearrangement of a series. Let Z+ be the positive integers: Z+ = {1, 2, 3, . . .}. Deﬁnition 9.1 Let ϕ : Z+ → Z+ be a bijection, i.e., a one-to-one mapping of the positive integers onto themselves. Then we say that the series ∞ ∞ aϕ(k) is a rearrangement of the series ak . k=1

k=1

Theorem 9.1 An absolutely convergent series remains absolutely convergent and its sum does not change as a result of any rearrangement of its terms.

9.1 Rearranging series

229

∞ Proof.Put s = bijection and put k=1 ak . Let ϕ be a rearrangement n ak is absolutely convergent, tn = k=1 aϕ(k) . The starting point is that i.e., that ∞ |ak | = σ < +∞. k=1

Let M (n) = max1≤k≤n ϕ(k). Then certainly n

M (n)

|aϕ(k) | ≤

|aj | ≤ σ < +∞,

j=1

k=1

and since σ does not depend on n it follows that the rearranged series is also absolutely convergent. Now let ε > 0 bean arbitrary positive number. ∞ Then there exists an N0 = N0 (ε) such that j=N0 +1 |aj | < ε. If m is large enough, the numbers ϕ(1), ϕ(2), ϕ(3), . . . , ϕ(m) will surely include all the numbers 1, 2, 3, . . . , N0 (and probably a lot of other numbers). Then we can estimate: for all suﬃciently large values of m it holds that ∞ ∞ m |tm − s| = aϕ(k) − ak = aj ≤ |aj | ≤ |aj | < ε, k=1

j=1

some

j>N0

some

j>N0

j=N0 +1

which means that tm → s as m → ∞, and this is what we wanted to prove. In certain situations it is natural to consider series with terms indexed by all integers: we have seen Fourier series in Chapter 4, and in complex analis (classically) conysis one considers Laurent series. Such a series ∞ k∈Z ak ∞ sidered as convergent if the two “halves” k=0 ak and k=1 a−k are both separately convergent. As we have seen in Chapter 4, there are also other ways to deﬁne the convergence of such a series. In the case of Fourier n series it turns out to be natural to study the symmetric partial sums k=−n ak . The example ∞ k k=−∞

shows that these may well converge, although the series is divergent in the classical sense. Exercise 9.1 (a) Describe (in principle) how to rearrange a conditionally convergent series (for example the one in the introductory example above) to make it converge to the sum 4. (b) Describe how to rearrange the same series so that it diverges to −∞. (c) The series can also be rearranged so that its partial sums make up a sequence that is dense in the interval [−13, 2003]. How? (d) The partial sums can be dense on the whole real axis. How?

230

9. Multi-dimensional Fourier analysis

k

k

k

i

i

i

FIGURE 9.1.

9.2 Double series Let there be given a doubly indexed sequence of numbers, i.e., a set of numbers aij , where both i and j are integers (positive, say). We want to add all these numbers, that is to say we want to compute what could be ∞ denoted by aij . We immediately meet a diﬃculty: there is no “natural” i,j=1

order in which to take the terms, when we want to deﬁne partial sums. The problem can be illustrated as in Figure 9.1: to each lattice point (i, j) (i.e., point with integer coordinates) in the ﬁrst quadrant there corresponds the term aij . The terms can be enumerated in diﬀerent ways, as indicated in the ﬁgure. None of these orderings is really more natural than the others. As seen in the previous section, we must expect to get diﬀerent end results when we try diﬀerent orderings. The mathematician’s way out of this dilemma is to evade it. He restricts the choice of series that he cares to consider. Each way of enumerating the terms in the double series actually amounts to re-thinking it as an “ordinary” series with a certain ordering of the terms. Suppose that one enumeration results in a series that turns out to be absolutely convergent. By Theorem 9.1, every other enumeration will also result in a series that is absolutely convergent, and which even has the same sum as the ﬁrst one. This means that the order of summation does not really matter, and it can be chosen so as to be convenient in some way or other. ∞ We summarize: A double series aij is accepted as convergent only if i,j=1

it is absolutely convergent. The following theorem, which deals with a diﬀerent kind of rearrangement, can also be proved.

9.2 Double series ∞

Theorem 9.2 Suppose that the double series

231

aij is (absolutely) con-

i,j=1

vergent with sum s. Put Vi =

∞

aij ,

Hj =

j=1

Then also s=

∞

aij .

i=1 ∞

Vi =

i=1

∞

Hj ,

(9.1)

j=1

where all the occurring series are also absolutely convergent. In plain words, the formula (9.1) says that the series can be summed “ﬁrst vertically and then horizontally,” or the other way round; (9.1) can be written as ∞ ∞ ∞ ∞ ∞ aij = aij = aij . i,j=1

i=1

j=1

j=1

i=1

We omit the proof. An important case of double series occurs when two simple series are multiplied. Theorem 9.3 Suppose that s =

∞ i=1

vergent series. Then the double series

ai and t = ∞

∞

bj are absolutely con-

j=1

ai bj is also absolutely convergent

i,j=1

and has the sum s · t.

Again, we omit the proof and round oﬀ with a few examples. ∞ 1 = Example 9.2. It is well known that xk , where the series is 1−x k=0 absolutely convergent for |x| < 1. Then, by Theorem 9.3, we also have ∞ ∞ ∞ 1 1 1 j k = x x = xj+k . · = (1 − x)2 1 − x 1 − x j=0 k=0

j,k=0

We choose to sum this series “diagonally” (draw a picture!): j + k = n, n = 0, 1, 2, . . ., and for ﬁxed n we let j run from 0 to n: ∞ ∞ n ∞ n 1 j+k n n = = = x x x 1 (1 − x)2 n=0 n=0 j=0 n=0 j=0 j+k=n

=

∞ n=0

(n + 1)xn

(= 1 + 2x + 3x2 + 4x3 + · · ·),

232

9. Multi-dimensional Fourier analysis

which must be absolutely convergent for |x| < 1. (The doubtful reader can check this by, say, the ratio test.) Compare the calculations in the example and the ordinary maneuvers when switching the order of integration in a double integral! Example 9.3. Convolutions have been encountered a few times in different situations earlier in the book. (A uniﬁed discussion of this notion is found in Appendix A.) Here we take a look at the case of convolutions of ∞ sequences. If a = {ai }∞ i=−∞ and b = {bi }i=−∞ are two sequences of num∞ bers, a third sequence c = {ci }i=−∞ , the convolution of a and b, is formed by the prescription ci =

∞

ai−j bj =

j=−∞

ai−j bj ,

all i ∈ Z,

j∈Z

provided the series is convergent. ∞ If, say, a andb∞are absolutely summable, which means that the series −∞ |ai | = s and −∞ |bi | = t are convergent, this is true, as is seen by the following computations:

|ci | =

i∈Z

a b |ai−j bj | = |bj | |ai−j | i−j j ≤ i

i∈Z j∈Z

=

j

j

i

|bj | · s = t · s < +∞.

j

Not only does the convolution c exist, it is actually absolutely summable, too! One writes c = a ∗ b. In what follows, we shall even encounter series where the terms are numbered by indices of dimension greater than 2. For these series, the same results apply as in the case we have considered: by “convergence” one must mean absolute convergence, or else some particular order of summation must be explicitly indicated. Exercises 9.2 For a > 0, compute the value of the sum

∞ ∞

2−(ak+j) .

k=1 j=1

∞

9.3 Compute

k,n=2

k−n .

an einx and g(x) ∼ bn einx , where the Fourier 9.4 Suppose that f (x) ∼ series are assumed to be absolutely convergent (i.e., |an | < ∞ and |bn | < ∞). Find the Fourier coeﬃcients of h = f g.

9.3 Multi-dimensional Fourier series

233

9.3 Multi-dimensional Fourier series We shall indicate how to treat Fourier series in several variables. Practical computation with such series in concrete cases easily leads to volumes of computation that are hardly manageable by hand. Thus, there is no reason to try to acquire much skill at such computations; but it is of great interest for applications that these series exist. We shall study functions deﬁned on Td , where d is a positive integer. d T is the Cartesian product of d copies of the circle T and is called the d-dimensional torus. A typical element of Td is thus a d-tuple x = (x1 , x2 , . . . , xd ), where xk ∈ T for k = 1, 2, . . . , d. Thus, a function f : Td → C is a rule that to each x ∈ Td assigns a complex number f (x) = f (x1 , x2 , . . . , xd ). An alternative description is to consider functions f : Rd → C that are 2π-periodic in each argument, i.e., f (x1 + 2πn1 , x2 + 2πn2 , . . . , xd + 2πnd ) = f (x1 , x2 , . . . , xd ) for all xk ∈ R and all integers nk , k = 1, 2, . . . , d. Integration over Td should be interpreted and described in the following way: f (x) dx = ··· f (x1 , x2 , . . . , xn ) dx1 dx2 · · · dxd T

Td

T

T

a1 +2π

a2 +2π

= a1

a2

···

ad +2π

f (x1 , x2 , . . . , xn ) dx1 dx2 · · · dxd ,

ad

where the numbers a1 , a2 , . . . , ad can be chosen at will (because of the periodicity). The space Lp (Td ) consists of all (Lebesgue measurable) functions such that f pLp (Td ) := |f (x)|p dx < ∞. Td

Most important are, as earlier in the book, the cases p = 1, when the functions are also called absolutely integrable, and p = 2. In the latter case, there is also an inner product f, g = f (x) g(x) dx. Td

Functions that agree except for a zero set are identiﬁed, just as before; what is meant by a zero set is, however, someting new. A zero set is something with the d-dimensional volume measure equal to zero. Thus, in T2 a part

234

9. Multi-dimensional Fourier analysis

of a straight line is a zero set, in T3 a part of a plane (or some other smooth surface) is a zero set. We shall work with d-tuples of integers, which we write as n = (n1 , n2 , . . . , nd ). These are the elements of the set Zd . For x ∈ Td and n ∈ Zd we form the “scalar product” n · x = n1 x1 + n2 x2 + · · · nd xd =

d

nk xk .

k=1

For this product, a few natural rules hold. Some of these are the following, which the reader may want to prove (if it seems necessary): (m + n) · x = m · x + n · x,

n · (x + y) = n · x + n · y.

We shall also need the functions ϕn , deﬁned by ϕn (x) = ein·x = exp(i(n1 x1 + n2 x2 + · · · nd xd )). They have a nice property in the space L2 (Td ): ϕm , ϕn = eim·x ein·x dx = ei(m−n)·x dx Td

=

Td

ei(m1 −n1 )x1 ei(m2 −n2 )x2 · · · ei(md −nd )xd dx1 dx2 · · · dxd

Td

=

d 1

k=1

T

ei(mk −nk )xk dxk = 0

as soon as mk = nk for some k.

It follows that ϕm is orthogonal to ϕn as soon as the d-tuple m is diﬀerent from the d-tuple n. But if m = n, each of the integrals in the last product will be equal to 2π, so that ϕn 2 = ϕn , ϕn = (2π)d . For a function f ∈ L2 (Td ), we can deﬁne the Fourier coeﬃcients 1 cn = f'(n) = f (x) e−in·x dx (2π)d Td 1 = · · · f (x1 , x2 , . . . , xd ) e−i(n1 x1 +n2 x2 +···+nd xd ) dx1 dx2 · · · dxd . (2π)d Tp

9.3 Multi-dimensional Fourier series

235

The formal Fourier series can be written f (x) ∼ cn ein·x =

n∈Zd ∞

∞

∞

···

n1 =−∞ n2 =−∞

f'(n1 , n2 , . . . , nd )ei(n1 x1 +n2 x2 +···+nd xd ) .

nd =−∞

Because of Bessel’s inequality, it will converge in the sense of L2 . Indeed, it can be proved that the system {ϕn }n∈Zd is complete in L2 (Td ). The Fourier coeﬃcients can also be deﬁned if we only assume that f ∈ L1 (Td ), and we could try to imitate the theory of Chapter 4. Convergence theorems are, however, considerably more complicated to formulate and prove. For most practical purposes it is suﬃcient to know that the Fourier series “represents” the function, without actually knowing whether it converges pointwise in some sense or other. Remark. A suﬃcient condition for pointwise convergence in the case d = 2 is that f ∈ C 1 (T2 ) and that in addition the mixed second derivative fxy is continuous on T2 . Conditions of this type can, in principle, be established for any value of d. Higher dimension requires, in general, higher regularity of the function.

When the dimension is low, say, 2, it can be practical to write such things as (x, y) and (m, n) instead of (x1 , x2 ) and (n1 , n2 ). We shall do so in the following example. Example 9.4. Let f be deﬁned by f (x, y) = xy for |x| < π, |y| < π. We compute its Fourier coeﬃcients cmn . We shall need the value of the integral −ikt π π π e 1 −ikt te dt = t − e−ikt dt αk := −ik −π −ik −π −π = 2πi

(−1)k k

for k ∈ Z \ {0},

α0 = 0.

We get π π 1 xy e−i(mx+ny) dx dy 4π 2 −π −π π π 1 = 2 x e−imx dx y e−iny dy 4π −π −π

cmn =

(−1)m (−1)n αm αn (−1)m+n+1 = − = if mn = 0, 4π 2 m n mn cmn = 0 if mn = 0. =

The series can be written f (x, y) ∼

(−1)m+n+1 ei(mx+ny) . mn m,n∈Z mn=0

236

9. Multi-dimensional Fourier analysis

Example 9.5. Of course, other periods than 2π can be treated, and the periods need not be the same in diﬀerent directions. Deﬁne f by f (x, y) = xy − x2 for −1 < x < 1 and 0 < y < 2π, and assume the period to be 2 in the x variable and 2π in the y variable. The Fourier coeﬃcients are given by the formula 1 2π 1 cmn = dx (xy − x2 ) e−i(mπx+ny) dy. 2 · 2π −1 0 (Eﬀective computation of these coeﬃcients is rather messy, because there occur a number of cases such as for one or the other of m and n being zero, etc.) d It is also possible to study Fourier series for periodic distributions on R , but we leave this out.

9.4 Multi-dimensional Fourier transforms The theory of Fourier transforms is extended to Rd in a way that is completely analogous to our treatment of Fourier series in the last section. Notation: elements of Rd are x = (x1 , x2 , . . . , xd ), and elements of what ' d are written as ω = (ω1 , ω2 , . . . , ωd ). We is often called the dual space R deﬁne a “scalar product” ω · x = ω1 x1 + ω2 x2 + · · · + ωd xd . The fact that f : Rd → C belongs to the class L1 (Rd ) means that (f is Legesgue measurable and) the integral |f (x)| dx = · · · |f (x1 , x2 , . . . , xd )| dx1 dx2 · · · dxd f 1 := Rd

Rd

' d , the integral is convergent. Then for all ω ∈ R f'(ω) = f (x) e−iω ·x dx, Rd

' d → C is called the Fourier transform of exists, and the function f' : R f . Under suitable conditions, one can recover f , in principle, through the formula 1 f (x) = f'(ω) eix·ω dω. (2π)d R d ' Suﬃcient conditions for this to hold pointwise are, for example, that f' ∈ ' d ) or that f is suﬃciently regular (has continuous derivatives of suﬃL1 (R ciently high order, and this order depends on the dimension d). But also in

9.4 Multi-dimensional Fourier transforms

237

other cases, the Fourier transform can be said to “represent” the function in some sense, and it can be used in various kinds of calculations. The L2 theory indicated in Section 7.6 (including Plancherel’s theorem) can also be generalized to higher dimensions. Example 9.6. An important application of the transform is found in the theory of probability, where the multi-dimensional normal distribution is used. In dimension d, a normalized version of this is described by the density function f (x) =

1 1 exp(− 12 (x21 + x22 + · · · + x2d )) = exp(− 12 |x|2 ). d/2 (2π) (2π)d/2

It holds that f 1 = 1, and it is easy to compute the Fourier transform or characteristic function f'(ω) =

=

1 (2π)d/2 d 1

−|x|2 /2 −iω ·x

e

e

Rd

d 1

1 dx = 1/2 (2π) k=1

R

e−xk /2 e−iωk xk dxk 2

e−ωk /2 = exp(− 12 |ω|2 ). 2

k=1

Here we have made use of our knowledge of the ordinary one-dimensional 2 transform of the function e−x /2 .

This page intentionally left blank

Appendix A The ubiquitous convolution

The operation known as convolution appears, in a variety of versions, throughout the theory. We shall here indicate what also makes this operation so important in applications. In a purely mathematical setting, we ﬁnd that convolutions of number sequences occur when we multiply polynomials and related objects such as power series. Given two polynomials P (x) = a0 + a1 x + a2 x + · · · + am xm ,

Q(x) = b0 + b1 + b2 x2 + · · · + bn xn ,

we multiply these term by term to get a polynomial P Q(x) = c0 + c1 x + c2 x2 + · · · + cm+n xm+n . It is easily seen that its coeﬃcients are given by c0 = a0 b0 ,

c1 = a0 b1 + a1 b0 ,

c2 = a0 b2 + a1 b1 + a2 b0 ,

and, in general ck = a0 bk + a1 bk−1 + a2 bk−2 + · · · + ak b0 =

aj bj .

i+j=k

This formula exhibits the characteristic property of a convolution: two “numbered objects” are combined so that the sums of indices is constant, to form a new “numbered object”. If the objects are “numbered” using a continuous variable, we have to deal with integrals instead of sums. Now we turn to applications. We study a “black box,” i.e., a device that converts an insignal f (t) into an outsignal g(t). We shall assume that the device satisﬁes a few reasonable conditions, namely, the following:

240

Appendix A. The ubiquitous convolution

(a) It is invariant under translation of time, which means that if we feed it a translated input f (t − a), then the output is similarly translated to have the shape of g(t − a). In plain words, this condition amounts to saying that the device operates in the same way whatever the clock says. (b) It is linear, which means that if we input a linear combination such as αf1 (t) + βf2 (t), the output looks like αg1 (t) + βg2 (t) (with the natural interpretation of letters). This is a reasonable assumption for many (but certainly not all) black boxes. (c) It is continuous in some way (which we shall not specify explicitly here), so that “small” alterations of the input generate “small” changes in the output. (d) It is causal, which means that the output at any point t0 in time cannot be inﬂuenced by the values taken by f (t) for t < t0 . In the ﬁrst case to consider, we assume that we sample both input and output at discrete points in time. This means that the input can be represented by a sequence f = {ft }∞ t=−∞ , and the output is another sequence . For a start, we assume that the input is 0 for all t < 0. The g = {gt }∞ t=−∞ conditions (d) and (b) then force the output to have the same property. It will be practical to denote these sequences as f = (f0 , f1 , f2 , . . .). Let δ be the input sequence (1, 0, 0, 0, . . .), and suppose that it results in the output a := (a0 , a1 , a2 , . . .) (the impulse response). By causality and translation invariance, it is then clear that the postponed input δ n = (0, . . . , 0, 1, 0, 0, . . .) yields the output an = (0, . . . , 0, a0 , a1 , a2 , . . .). By linearity, then, the input f = (f0 , f1 , . . . , fn , 0, 0, . . .) =

n

fk δ k

k=0

must produce the output n

fk ak

k=0

n = f0 a0 , f0 a1 + f1 a0 , f0 a2 + f1 a1 + f2 a0 , . . . , j=0 fj an−j , 0, 0, . . . . Finally, by continuity, we ﬁnd that an arbitrary input f = (f0 , f1 , f2 , . . .) must produce an output g = (g0 , g1 , g2 , . . .), where gn = f0 an + f1 an−1 + f2 an−2 + · · · + fn a0 ,

n = 0, 1, 2, . . . .

We call g the convolution of f and a, and we write g = f ∗ a. Now we remove the condition that everything starts at time 0. We return to the notation f = {ft } = {ft }∞ t=−∞ . We we assume that an input f may

Appendix A. The ubiquitous convolution

241

start at any time t = −T , where T may also be positive. The invariance of the black box under translation of time indicates what must happen now. Let f and g be the translated sequences deﬁned by ft = ft−T and gt = gt−T for t ≥ 0. By property (a) we must have g = f ∗ a, where a is the sequence ta above, extended by zeroes for negative indices. This means that gt = k=0 ak ft−k for all t ≥ 0. We rewrite this with t replaced by t + T and get gt = gt+T =

t+T

ak ft+T −k =

k=0

t+T

ak ft−k ,

t ≥ −T.

k=0

If we let ft = 0 for all t < −T , we can write this as gt =

∞

t

ak ft−k =

k=0

at−k ft .

k=−∞

This formula deﬁnes the convolution of two sequences a and f , where now all the ft may be diﬀerent from zero — we can treat the case, theoretically possible, of an “input” that has no beginning. It is also possible to consider the same sort of notion where the other convolution factor a also has “no beginning.” This leads us to the formula for the convolution of two doubly inﬁnite sequences a = {at }∞ −∞ and f = {ft }∞ : −∞ ∞ ∞ (f ∗ a)t = ak ft−k = fk at−k . (A.1) k=−∞

k=−∞

This case may not be physically interesting for the description of (causal) black boxes and the like, but it is interesting as a mathematical construction. We now turn our interest to functions deﬁned on a continuous t-axis. The analysis above, that depends on simple notions of linear algebra, cannot be imitated directly. Also, we do not attempt a completely stringent treatment, but content ourselves by a more intuitive approach. Let f (t) be the input and g(t) the output, as before, and introduce a “black box function” ϕ(t) that describes the device. In fact, let ϕ(t) be the impulse response, i.e., it descibes the output resulting from inputting a Dirac pulse δ(t) at t = 0. By causality and linearity, ϕ(t) = 0 for t < 0. For any number u, by translation invariance, the input δ(t − u) must result in the output ϕ(t − u). Now consider an arbitrary input f (t). The properties of δ imply that ∞

f (t) = −∞

f (u)δ(t − u) du.

(A.2)

Linearity and continuity now imply that the output due to f should be ∞ f (u)ϕ(t − u) du. (A.3) g(t) = f ∗ ϕ(t) = −∞

242

Appendix A. The ubiquitous convolution

(This conclusion could be supported in the following way: the integral in (A.2) might be approximated by “Riemann sums” f (uk )δ(t − uk ), and linearity tells us that the response to this is the corresponding sum f (uk )ϕ(t − uk ), which is an approximation to (A.3). This is, however, not logically rigorous, because a Riemann sum involving δ is really rather nonsensical.) In the considerations leading up to (A.3) we assumed that ϕ(t) = 0 for t < 0, which means that the interval of integration is actually ] − ∞, t[. If, in addition, the input does not start before t = 0, the integral is to be taken over just [0, t], and we recognize the variant of the convolution that appears in connection with the Laplace transform. Just as in the discussion of sequences, these restrictions on f and ϕ can be totally removed for more general applications.

Appendix B The discrete Fourier transform

This appendix is an introduction to a discrete (i.e., “non-continuous”) counterpart of Fourier series. If you like, you can view it as an approximation to ordinary Fourier series, but it has considerable interest on its own. In applications during the last half-century, it has acquired great importance for treating numerical data. One then uses a further development of the elementary ideas that are presented here, called the fast Fourier transform (FFT). For convenience, we study the interval (0, 2π). In this interval we single out the points xk = k · 2π/N , k = 0, 1, . . . , N − 1, which make up a set G = GN : 2πk : k = 0, 1, 2, . . . , N − 1 . G = GN = {xk : k = 0, 1, 2, . . . , N − 1} = N Consider the set lN = l2 (GN ) of functions f : GN → C (cf. Sec. 5.3). For each k, f (xk ) is thus a complex number. The set lN is a complex vector space. It is easy to construct a natural basis in this space: let en be the function on GN deﬁned by en (xk ) = 1 for k = n, = 0 for k = n; then it is −1 easily seen that {en }N makes up a linearly independent set, and for each n=0 N −1 f ∈ lN it holds that f = k=0 f (xk )ek , which means that {en } spans the space lN . Thus, the dimension of the complex vector space is N . In lN we deﬁne (just as in Sec. 5.3) an inner product by putting f, g =

N −1 k=0

f (xk ) g(xk ) .

244

Appendix B. The discrete Fourier transform

The basis {en } is orthonormal with respect to this inner product. We now proceed to construct another basis, which will prove to be orthogonal. Begin by letting ω = ωN = exp(2πi/N ) (ω is a so-called primitive N th root of unity). Then deﬁne a function ϕn by putting ϕn (x) = einx , or, more precisely, k ϕn (xk ) = exp in · · 2π = ω nk . N Notice that this deﬁnition implies that ϕn (xk ) = ω −nk . −1 2 Theorem B.1 {ϕn }N n=0 is an orthogonal basis in lN , and ϕn = N .

Proof. The number of vectors is right, so all that remains is to show that they are orthogonal. Let 0 ≤ m, n ≤ N − 1, and form ϕm , ϕn =

N −1

ω mk ω −nk =

k=0

N −1

ω (m−n)k .

k=0

If m = n, all the terms in the sum are equal to 1, which gives ϕn , ϕn = N . If m = n, we have a ﬁnite geometric sum with the ratio ω m−n = 1. (Since 0 ≤ m, n ≤ N − 1, it must hold that −N + 1 ≤ m − n ≤ N − 1, and in that case ω m−n = 1 is possible only if m − n = 0.) The formula for a geometric sum then gives 1 − ω (m−n)N ϕm , ϕn = . 1 − ω m−n 2πi But ω (m−n)N = exp · (m − n)N = e2πi(m−n) = 1, which implies that N ϕm , ϕn = 0, and the theorem is proved. Since we have an orthogonal basis, we can represent an arbitrary f ∈ lN as f = cn ϕn , where the coeﬃcients are given by cn =

f, ϕn 1 = f, ϕn . ϕn , ϕn N

It is also common to write cn = f'(n), which results in the formula N −1 N −1 1 1 1 f (xk )ω −kn = f (xk )e−i2πkn/N . f'(n) = f, ϕn = N N N k=0

k=0

With these Fourier coeﬃcients we have thus f=

N −1 n=0

f'(n)ϕn ,

Appendix B. The discrete Fourier transform

245

or, written out in full, f (xk ) =

N −1

f'(n)ϕn (xk ) =

n=0

=

N −1

N −1

f'(n)ω nk =

n=0

N −1

f'(n)ei2πkn/N

n=0

f'(n)einxk .

n=0

Compare the “complex” form of an ordinary Fourier series. (We could formulate a “real” counterpart of this, too, but the formulae for that construction are messier.) The theorem of Pythagoras or the Parseval formula for the system {ϕn } N −1 looks like f 2 = n=0 |f'(n)|2 ϕn 2 , or N −1 N −1 1 2 |f (xk )| = |f'(n)|2 . N n=0 k=0

In practical use, the computation of f'(n) can be speeded up by the use of an idea by Cooley and Tukey (1965) (the fast Fourier transform). The idea is that the right-hand member in the formula N −1 N −1 k 1 1 f'(n) = f (xk )ω −nk = f (xk ) ω −n N N k=0

k=0

can be seen as a polynomial in the variable ω −n , which is swiftly computed using the method of Horner; this reduces the number of operations considerably. Further rationalizations are possible, using factorization of the number N . More about this can be found in books on numerical analysis.

This page intentionally left blank

Appendix C Formulae

C.1 Laplace transforms Take care to use the correct deﬁnition when dealing with distributions (cf. Sec 3.5, p. 57). f (t) f(s) = F (s) = L[f ](s)

General rules

∞

e−st f (t) dt

L01.

f (t)

L02.

αf (t) + βg(t)

αF (s) + βG(s)

L03.

tn f (t)

(−1)n F (n) (s)

L04.

e−at f (t),

L05.

f (t − a) H(t − a),

L06.

f (at),

L07.

f (t)

e−as F (s) 1 s! F a a sF (s) − f (0)

L08.

f (n) (t)

sn F (s) − sn−1 f (0)

0

L09. L10.

a constant a>0

a>0

F (s + a)

−sn−2 f (0) − · · · − f (n−1) (0) t

F (s) s

f (u) du 0

f ∗ g(t) =

0

t

f (u)g(t − u) du

F (s) G(s)

248

Appendix C. Formulae

Laplace transforms of particular functions L11.

δ(t)

L12.

δ

(n)

L13.

H(t)

L14.

tn ,

L15.

e−at

L16.

ta ect ,

L17.

cos bt

L18.

sin bt

L19.

t sin bt

L20.

t cos bt

L21.

1 (sin bt − bt cos bt) 2b3

L22.

δ(t − a), a ≥ 0 sin t t 2 a √ e−a /(4t) , a > 0 3 4πt et/n dn n −t t e ln (t) = n! dtn

L23. L24. L25.

1 (t)

n = 0, 1, 2, . . .

a > −1, c ∈ C

L26.

ln t

L27.

Γ (t) − ln t

L28.

ebt − eat , t

L29. L30.

sn 1 s n! sn+1 1 s+a Γ(a + 1) (s − c)a+1 s s2 + b2 b s2 + b2 2bs 2 (s + b2 )2 s2 − b2 (s2 + b2 )2 1 2 (s + b2 )2 e−as arctan √ s

1 s

e−a

1 n 2 1 n+1 2

s−

s+

ln s + γ , s ln s s s − a ln s − b −

a, b ∈ R

√t √ 2 2 Erf ( t) = √ e−u du π 0 ∞ −u e Ei (t) = du u t

1 √ s s+1 ln(s + 1) s

γ = 0.5772156 . . .

C.1 Laplace transforms

L31.

∞

Si (t) = t

L32.

Ci (t) = t

L33.

J0 (t)

L34.

√ J0 2 t

Γ(x) =

∞

∞

sin u du u

arctan s s

cos u du u

ln(s2 + 1) 2s 1 √ s2 + 1

(Bessel function)

tx−1 e−t dt, x > 0.

e−1/s s Γ(x + 1) = xΓ(x).

0

√ Γ(n + 1) = n! for n = 0, 1, 2, . . .. Γ 12 = π. $ # n 1 − ln n ≈ 0.5772156. γ = Euler’s constant = lim n→∞ k k=1

249

250

Appendix C. Formulae

C.2 Z transforms ∞

A(z) = Z[a](z) =

an z −n ,

|z| > σ = σa .

n=0

Inversion:

1 2πi

an =

A(z)z n−1 dz,

n ∈ N, r > σa .

|z|=r

an

A(z)

General rules Z1.

λan + µbn

Z2.

λ an

Z3.

(k ≥ 0) :

Z4.

nan

Z5.

(a ∗ b)n =

λA(z) + µB(z)

n

an+k n

zk

A(z/λ) a(k − 1) a(1) − ··· − A(z) − a(0) − z z k−1 −zA (z)

ak bn−k

A(z) B(z)

k=0

Particular sequences Z6.

1

Z7.

n

Z8.

n2

Z9.

λn

Z10.

nλn

Z11.

(n + 1)λn n+m n λ m n n λ m

Z12. Z13. Z14.

cos αn

Z15.

sin αn λn n!

Z16.

z z−1 z (z − 1)2 z2 + z (z − 1)3 z z−λ λz (z − λ)2 z2 (z − λ)2 z m+1 (z − λ)m+1 λm z (z − λ)m+1 z 2 − z cos α z 2 − 2z cos α + 1 z sin α z 2 − 2z cos α + 1 eλ/z

C.3 Fourier series

251

C.3 Fourier series

where

∞

∞

a0 (an cos nx + bn sin nx) + 2 −∞ n=1 π π an = π1 −π f (x) cos nx dx 1 −inx π . f (x) e dx resp. cn = 2π −π bn = π1 −π f (x) sin nx dx f (x) ∼

cn einx ∼

cn = 12 (an − ibn ), n ≥ 0 c−n = 12 (an + ibn ), n ≥ 0

an = cn + c−n , n≥0 bn = i(cn − c−n ), n ≥ 1

2 π f (x) cos nx dx. π 0 2 π f odd =⇒ an = 0 and bn = f (x) sin nx dx. π 0 f even =⇒ bn = 0 and an =

π ∞ 1 2 |f (x)| dx = |cn |2 2π −π n=−∞ Parseval: π ∞ 1 |a0 |2 2 + |an |2 + |bn |2 |f (x)| dx = π −π 2 n=1 π ∞ 1 f (x) g(x) dx = cn γn 2π −π n=−∞ Polarized Parseval: ∞ 1 π a0 α0 + an αn + bn βn f (x) g(x) dx = π −π 2 n=1 If f has period 2P , then (P Ω = π) f (x) ∼

∞

inΩx

cn e

−∞

1 2P

cn =

1 2P

1 P a

a

a+2P

|f (x)|2 dx =

a

∞

|cn |2 ,

−∞ ∞

|a0 | |an |2 + |bn |2 , + 2 n=1 a 1 a+2P cos n f (x)e−inΩx dx, = f (x) nΩx dx. bn sin P a

a+2P

a+2P

∞ a0 an cos nΩx + bn sin nΩx , ∼ + 2 n=1

|f (x)|2 dx =

2

252

Appendix C. Formulae

C.4 Fourier transforms General rules f'(ω) ∞

f (t)

f (t) e−iωt dt

F01.

f (t)

F02.

1 2π

F03.

f even ⇐⇒ f' even,

F04. Linearity

αf (t) + βg(t)

F05. Scaling

f (at)

F06.

f (−t)

F07.

f (t)

f'(−ω)

F08. Time translation Frequency F09. translation F10. Symmetry

f (t − T )

e−iT ω f'(ω)

eiΩt f (t)

f'(ω − Ω)

g'(t) dn f (t) dtn

2πg(−ω)

F11. Time derivative F12.

∞

−∞

f'(ω) eiωt dω

(a = 0)

Frequency derivative

(−it)n f (t) ∞ F13. Time convolution f (t − u) g(u) du −∞

F14.

Frequency convolution

f'(ω)

−∞

f (t) g(t)

f odd ⇐⇒ f' odd αf'(ω) + β' g (ω) 1 ' ω! f |a| a f'(−ω)

(iω)n f'(ω) dn ' f (ω) dω n f'(ω) g'(ω) 1 2π

∞

−∞

Plancherel’s formulae: ∞ ∞ 1 f (t) g(t) dt = f'(ω) g'(ω) dω, 2π −∞ −∞ ∞ ∞ 1 |f (t)|2 dt = |f'(ω)|2 dω. 2π −∞ −∞

f'(ω − α) g'(α) dα

C.4 Fourier transforms

253

Fourier transforms of particular functions f (t)

f'(ω)

F15.

δ(t)

1

F16.

δ

(n)

F17.

f (t) = 1 for |t| < 1, = 0 otherwise

F18.

f (t) = 1 − |t| for |t| < 1, = 0 otherwise

F19.

e−t H(t)

F20.

et (1 − H(t))

F21.

e−|t|

F22.

e−|t| sgn t

F23.

sgn t

F24.

H(t)

F25.

1 sin Ωt πt 1 −t2 /2 √ e 2π 2 1 √ e−t /(4A) 4πA

F26. F27. F28.

(t)

(iω)n 2 sin ω ω 2 sin 12 ω 2 ω 1 1 + iω 1 1 − iω 2 1 + ω2 −2iω 1 + ω2 2 iω 1 + πδ(ω) iω 2πδ(ω) H(ω + Ω) − H(ω − Ω) e−ω

(A > 0)

2

/2

e−Aω

2

254

Appendix C. Formulae

C.5 Orthogonal polynomials L2w (a, b):

f, g =

b a

f (t) g(t) w(t) dt,

f =

f, f .

δkn = 1 if k = n, δkn = 1 if k = n (“Kronecker delta”). Legendre polynomials Pn (x): (a, b) = (−1, 1), w(t) ≡ 1. P1. P2. P3.

1 Dn (t2 − 1)n . 2n n! P0 (t) = 1, P1 (t) = t, P2 (t) = 12 (3t2 − 1), P3 (t) = 12 (5t3 − 3t). ∞ (1 − 2tz + z 2 )−1/2 = Pn (t) z n (|z| < 1, |t| ≤ 1).

Pn (t) =

n=0

P4. P5. P6.

(n + 1)Pn+1 (t) = (2n + 1)t Pn (t) − n Pn−1 (t). 1 2 δnk . Pn (t) Pk (t) dt = 2n +1 −1 (1 − t2 )Pn (t) − 2t Pn (t) + n(n + 1)Pn (t) = 0.

Laguerre polynomials Ln (t): (a, b) = (0, ∞), w(t) = e−t . L1. L2. L3.

et n n −t D t e . n! L0 (t) = 1, L1 (t) = 1 − t, L2 (t) = 1 − 2t + 12 t2 . ∞ 1 −tz = Ln (t) z n (|z| < 1). exp 1−z 1−z n=0 Ln (t) =

L5.

(n + 1)Ln+1 (t) = (2n + 1 − t)Ln (t) − nLn−1 (t). ∞ Lk (t) Ln (t) e−t dt = δkn .

L6.

tLn (t) + (1 − t)Ln (t) + nLn (t) = 0.

L4.

0

Hermite polynomials Hn (t): (a, b) = (−∞, ∞), w(t) = e−t . 2

H1. H2. H3.

2 2 Hn (t) = (−1)n et Dn e−t . H0 (t) = 1, H1 (t) = 2t, H2 (t) = 4t2 − 2, H3 (t) = 8t3 − 12t. ∞ zn 2tz−z 2 e = Hn (t) . n! n=0

H5.

Hn+1 (t) = 2tHn (t) − 2nHn−1 (t). ∞ √ 2 Hk (t) Hn (t) e−t dt = n! 2n π δkn .

H6.

Hn (t) − 2tHn (t) + 2nHn (t) = 0.

H4.

−∞

C.5 Orthogonal polynomials

√ Chebyshev polynomials Tn (t): (a, b) = (−1, 1), w(t) = 1/ 1 − t2 . Tn (cos θ) = cos nθ, 0 ≤ θ ≤ π.

T1.

Tn (t) = cos(n arccos t),

T2.

T0 (t) = 1, T1 (t) = t, T2 (t) = 2t2 − 1, T3 (t) = 4t3 − 3t.

T3. T4.

Tn (t) = 2tTn−1 (t) − Tn−2 (t). 1 dt Tk (t) Tn (t) √ = 12 πδkn if k > 0 or n > 0; 1 − t2 −1 = π if k = n = 0.

T5.

(1 − t2 )Tn (t) − tTn (t) + n2 Tn (t) = 0.

255

This page intentionally left blank

Appendix D Answers to selected exercises

Chapter 1 2

2

1.1. u(x, t) = 21 (e−(x−ct) + e−(x+ct) ) +

1 (arctan(x + ct) − arctan(x − ct)). 2c

Chapter 2 √ √ √ 2.1. i, (1 − i)/ 2, (− 3 + i)/2, 3 − i. 2.3. cos 3t = 4 cos3 t − 3 cos t. 2.12. lim ak /k = 0.

1 δ(t). |a| 2.25. χ(t)δa (t) = χ(a)δa (t) − 2χ (a)δa (t) + χ (a)δa (t). 2.23. δ(2t) = 12 δ(t); δ(at) =

2.27. f (x) = −2H(x + 1) + 2H(x − 1) + 2δ(x + 1) + 2δ(x − 1); (x2 − 1)f (x) = 2f (x). 2

2.29. y = ea

−t2

2

H(t − a) + Ce−t , where C is an arbitrary constant.

2.31. y = 14 (1 + x2 )H(x − 1) + 1 + x2 . 2

2

2

2.33. y = (1 − e−x )H(x) − e1−x H(x − 1) + (1 + e)e−x . 2.36. ϕ (0). 2.38. f (t) = 2tH(t), f (t) = 2H(t), f (t) = 2δ(t), f (4) (t) = 2δ (t).

258

Appendix D. Answers to selected exercises

2.40. f (x) = 24x(H(x + 1) − H(x − 1) + 8(δ(x + 1) − δ(x − 1)).

Chapter 3 3.3. f(s) = (1 + e−πs )/(s2 + 1). 1 s4 + 4s2 + 24 4 − . (b) s3 2+1 s5 2e−s f(s) = 3 . s 1 s + 1 f(s) = ln . s s 2s(e−πs + 1) πe−πs f(s) = 2 . + s +1 (s2 + 1)2 2(s + 1) . ((s + 1)2 + 1)2

3.4. (a) 3.6. 3.7. 3.9. 3.11. 3.14.

1 − (1 + s)e−s . s2 (1 − e−s )

3.17. (a) 1 − e−t .

(b) 3tet .

3.18. (a) e−t − 1 + t.

c)

1 4

(c)

1 2 − 2 . s s +4

1 − (2t + 1)e−2t .

(b) 1 − cos bt.

3.19. (a) f (t) = 1 + H(t − 1). (b) f (t) = (e2(t−1) − et−1 )H(t − 1). e−2t − e−3t (c) . t t 3.21. y = e (2 − 2 cos t − t sin t). 3.23. x = 2 + 12 (t2 + e−t + cos t − 3 sin t), y = 12 (2 − e−t − cos t + 3 sin t). 3.25. y(t) = 2et − e2t + 12 (1 − e2(t−2) − 2et−2 )H(t − 2). 3.27. y = et − t − 1. 1 (eat − ebt ) if a = b; teat if a = b. 3.29. a−b 3.31. 12 (t cos t + sin t). 3.33. f (t) = 3. 3.35. y(t) = e−t sin t. 3.37. f (t) = 25 (1 − e−2t ) − 4te−t .

3.39. y = 1 − 12 (t2 + 1)e1−t H(t − 1) + 12 (t − 2)2 e2−t H(t − 2). 3.41. (a) E(t) = (c) E(t) =

1 sin 2t H(t). 2 1 2 −t t e H(t). 2 −t

3.43. f (t) = (2 − e 2z . 3.44. (a) 2z − 1 1 3

(b) E(t) = 12 e−2t sin 2t H(t).

) H(t).

(b)

2 n

3z . (z − 3)2

(c)

2z 2 + 4z . (z − 2)3

(d)

z . (z − 1)p+1

. (b) a1 = 1, an = 0 for all n = 1. nπ nπ , bn = 1 − sin . 3.47. an = 1 − cos 2 2

3.45. (a) an =

3

Appendix D. Answers to selected exercises 3.49. an = (−1)n

n 3

259

= 16 (−1)n (n3 − 3n2 + 2n).

3.51. y(0) = 13 ,

y(1) = − 53 , y(n) = 43 for all n ≥ 2. nπ nπ − 25 sin . 3.53. x(n) = 15 · 2n + 45 cos 2 2 3.55. (a) is stable, (b) and (c) are unstable. 3.57. y = et − e−t sin t.

3.59. y =

1 2

sin 2t +

1 4

(t − 1)2 −

1 8

+

1 8

cos 2(t − 1) H(t − 1).

3.61. f (t) = et cos 2t, t > 0. 3.63. y(t) = 12 t2 − t + 1 + cos t + sin t. 3.65. y(t) = sin t, z(t) = e−t − cos t. 3.67. y(t) = 2(t + 1) sin t, z = 2et − 2(t + 1) cos t. √ √ 1 3.69. f (t) = 3t − 3 + 8e−t + cos t 2 − √ sin t 2 . 2 3.71. y(t) = 2t − 1 + sin 2t. 3.73. y(t) =

1 2

t2 .

3.75. y(t) = 3t + 5. 3.77. y(t) = 4 sin 2t − 2 sin t.

Chapter 4 4.4. f (t) ∼ 1 + 2

∞ (−1)n+1

n

n=1

sin nt.

4.6. (a) f (t) ∼ cos 2t. (b) g(t) ∼ 12 + 12 cos 2t. (c) h(t) ∼ 34 sin t − 14 sin 3t. Sens moral: If a function consists entirely of terms that can be terms in a Fourier series, then the function is its own Fourier series. ∞ 1 − e−π 2 1 − (−1)n e−π 4.9. f (t) ∼ + cos nt. π π 1 + n2 n=1

4.12. f (t) ∼

7 − 15

4

π − 48

∞ (−1)n n=1

n4

cos nt; ζ(4) =

π4 . 90

4.16. If a has the form n2 + (−1)n for some integer n = 0, then the problem has the solutions y(t) = Aeint + Be−int , where A and B are arbitrary constants (the solutions can also be written in “real” form as y(t) = C1 cos nt + C2 sin nt). If a = 1 there are the solutions y(t) = constant. For other values of a there are no nontrivial solutions. ∞ (−1)n+1 4.18. f (t) ∼ 1 − 12 cos t + 2 cos nt. Converges to f (t) for all t. n2 − 1 n=2

(Sketch the graph of f !) ∞ ∞ 2 cos(2n − 1)t sin nt π − ; 4.20. (a) f (t) ∼ + (2n − 1)2 4 π n n=1

n=1

(b)

1 8

π2 .

260

Appendix D. Answers to selected exercises

4.22. cos αt ∼

∞ sin απ 2α sin απ (−1)n cos nt. The series converges − απ π n2 − α2 n=1

for all t to the periodic continuation of cos αt. Substitute t = π, divide by sin απ, and stir around; and the formula for the cotangent will materialize. sin 12 nπ 1 eint/2 . 4.24. y(t) = 12 + 1 2 1 π n 1 − n + in 4 2 n∈Z\{0} 4.26. f (x) ∼

∞ 8 sin(2k + 1)πx π3 ; the particular sum is . 3 3 π (2k + 1) 32 k=0

∞ 8 n(−1)n 4.28. f (t) ∼ − sin nt. π 4n2 − 1 n=1

π 2 eint . 4.30. f (t) ∼ + 2 π n2 n odd

4 2

− 4 sin 2t + 7 cos 3t. ∞ 2 4 cos 2nt (b) f (t) ∼ − . π π 4n2 − 1

4.32. (a) f (t) ∼

n=1

4.33. The same as 4.32 (b) (draw pictures, as always!).

1 b−a + 2π 2πi

4.35. f (t) ∼

n∈Z\{0}

e−ina − e−inb int e . It is convergent for all t. n

The sum is s(t) = 1 for a < t < b, s(t) = all other t ∈ [−π, π]. 4.37. f (t) ∼ − 16 + 4.39. r(t) ∼

1 2

for t = a ∨ t = b, s(t) = 0 for

1 2

−

∞ 1 cos 2πnt . π2 n2 n=1

2 2πint/T

|cn | e

.

n∈Z

4.41. f (x) ∼

∞ 2 4 cos nx − ; s1 = 12 , s2 = π π 4n2 − 1

1 4

π.

n=1

4.43. y(t) = c0 + cos t, where c0 is any constant. 1 (−1)n sin απ inx 4.45. f (x) ∼ e . π α−n n∈Z

4.48. f (x) ∼

7 15

+

∞ 48 (−1)n π4 cos nπx ; ζ(4) = . 4 4 π n 90 n=1

Chapter 5 5.1. u =

√

19, v =

√

11, u, v = 1 + 8i.

5.3. Yes. 5.5. (a) (1, 2, 3), (5, −4, 1), (1, 1, −1).

(b) 1, x, x2 − 13 .

Appendix D. Answers to selected exercises

261

5.7. p(x) = 3x + 12 (e2 − 7). π 5.9. p(x) = x. 2π 2 − 16 √ √ 5.11. π −1/4 , π −1/4 2 · x, π −1/4 2(x2 − 12 ). 5.13. c0 = 38 , c2 = 12 , c1 = c3 = 0. x − 35 x3 . (b) p(x) = 15 (3 − π)x2 + 43 (2π − 5). 5.18. (a) p(x) = 12 + 45 32 32 4 1 5.27. p(x) = √ (7 − 2x2 ). 3 π 2 3 5 5.29. First 16 + 15 x2 ; second + 35 (1 + 4x2 ); third 32 x2 . 16 32 3π 1 1 1 , s2 = (2 + 3π)/36, s3 = 144 π 2 − 162 . 5.31. s1 = 18 5.33. ζ(8) =

1 π8 . 9,450

5.35. ϕmn = 2π. 5.37. f (x) ∼ 6L0 (x) − 18L1 (x) + 18L2 (x) − 6L3 (x).

1

5.39.

|f (x)|2 dx =

∞

−1

(n + 12 )|cn |2 .

n=0 √ 5.41. The coeﬃcients are sin 1 resp. (2 cos 1 + sin 1 − 2) 3. 3 , a2 = 76 , a1 = a3 = 0. 5.43. a0 = − 35

15(π 2 − 12) 3(20 − π 2 ) , b = 0, c = . π3 π3 4 5.47. P (x) = (11 − 12x2 ). 15π 5.45. a =

Chapter 6 6.1. (a) u(x, t) = 34 e−t sin x − 14 e−9t sin 3x. ∞ 2 k 8 (b) u(x, t) = e−4k t sin 2kx. 2 π 4k − 9 k=1

6.3. u(x, t) = 21 (1 + e−9t cos 3x). 6.5. u(x, t) = (2e−t − 1) sin x + e−4t sin 2x. ∞ 4a (−1)k 6.7. The solution is u(x, t) = cos(2k + 1)t sin(2k + 1)x. π (2k + 1)2 k=0

Only partials with odd numbers are heard, which is natural because the even partials have vibration nodes at the middle point of the string. √ N −1 2 n(−1)n −(n2 +h)t sinh x h √ . 6.9. u(x, t) = sin nx + e π n2 + h sinh π h k=0 6.11. u(x, t) = sin 6.13. u(x, y) = 6.14. u(r, θ) =

∞ x 2 (−1)n n ( 14 −n2 )t e sin nx. + 2 π n2 − 14

n=1 3 + 14 (x4 − 6x2 y 2 + y 4 ). 4 3 r sin θ − 14 r3 sin 3θ. 4

262

Appendix D. Answers to selected exercises

6.17. ϕn (x) = sin ωn x, where ωn are the positive solutions of the equation tan(ωπ) = −ω, n = 1, 2, 3, . . .. Draw a picture: it holds that n − 12 < ωn < n. √ 1 6.21. u(x, t) = 34 e−t t sin x − √ e−t sin t 8 sin 3x. 8 2 6.23. u(x, t) = 10(x + 1) +

∞ nπx 40 1 −n2 π2 t sin e . π n 2 n=1

6.25. u(x, y) =

∞ 2 (−1)n+1

π3

n=1

n3 (enπ

+ 1)

enπy + enπ−nπy sin nπx +

π−y e − e4π−2y + cos 2x. 2π 2(e4π − 1) √ 6.29. u(x, t) = e−t (1 + t) sin x + (cos t 8 +

1 6

x3 − x .

2y

6.27. u(x, y) =

6.31. u(x, t) =

1 √ 8

√ sin t 8) sin 3x .

∞ 8 cos(2k − 1)2 t sin(2k − 1)x . π (2k − 1)3 k=1

6.33. (a) u(x, t) =

∞ 2 sin na sin nt sin nx. π n n=1

kπ for some k = 1, 2, . . . , 6. (b) a should satisfy sin 7a = 0, i.e., a = 7 For practical reasons one prefers k = 1 or 6 for a grand piano. (For an upright piano some other value may be more practical.)

Chapter 7 ω cos ω − sin ω 7.1. (a) f'(ω) = 2i , ω = 0; f'(0) = 0. ω2 2 (b) f'(ω) = 2(1 − cos ω)/(ω ) = 4 sin2 (ω/2)/(ω 2 ), ω = 0; f'(0) = 1. (c) and (d) f ∈ / L1 (R), and f' does not exist. g (ω) = −4iω/(ω 4 + 4). 7.5. (a) f'(ω) = 2(2 + ω 2 )/(ω 4 + 4), (b) ' 1 2 √ 7.7. (a) −i 2π ω exp − 2 ω . (b) See the remark following the exercises. 7.9. No (because 1 − cos ω does not tend to 0 as ω → ∞). 7.11. (a) πeiω−|ω| ,

(b)

1 π 2

e3iω−2|ω| ,

(c) − 12 πiωe−|ω| .

7.13. f (x) = e−x for x > 0. n

7.17. fa1 ∗ fa2 = fa1 +a2 . In general, ∗ fak = fΣnk=1 ak . k=1 1 7.19. f (t) = √ exp − 12 t2 . π π sin 5t 7.21. for t = 0, 5π for t = 0. t 7.23. The value of the integral is 12 π. 7.25. Boundary values are 0 for all x = 0, ∞ for x = 0 (if one approaches the boundary at right angles).

Appendix D. Answers to selected exercises

x2 1 exp − 1 + 4t 1 + 4t y+1 7.29. u(x, y) = 2 , y ≥ 0. x + (y + 1)2 7.31. cos t; if t = 0, the integral is 12 .

7.26. u(x, t) = √

+√

1 x2 exp − . 2 + 4t 1 + 2t

7.33. The solution that is attainable by Fourier transformation is y(t) = (e−t − e−2t )H(t). 2 7.35. f'(ω) = . (1 + ω 2 )(2 − eiω + iω) π −|ω−1|/3 7.37. (a) 13 πe−|ω|/3 . (b) 13 πe−|ω−1|/3 . (c) e − e−|ω+1|/3 . 6i ω cos ω − sin ω π 7.39. (a) f'(ω) = 4i · ; (c) . ω2 3 2 2 sin πω π 7.41. f'(ω) = . . The integral is i(1 − ω 2 ) 2 sin ω − ω cos ω 2 . The integrals are π/2 resp. 15 π. 7.43. f'(ω) = 4 ω3 2(a − 1) 1 , a > 1. 7.45. f (x) = 2π (a − 1)2 + x2 2 2 1 1 7.47. rxx = 2 A1 cos ω1 t + 2 A2 cos ω2 t. pxx (ω) ↑

A22

1 4

1 4

7.49.

−ω2 1−

1 2

A21

1 4

−ω1

2

2

x e−x

/2

−x

ω2

→ω

. 4 x/2 e (1 3

7.53. f (x) =

4 3

7.55. π 1 −

1 cosh x , |x| < 1. e

e

A22

A21

ω1

7.51. f'(ω) = −2iω/(1 + ω 2 ), integral =

1 4

H(x) +

1 2

π.

− H(x)).

Chapter 8 8.1. An antiderivative of ϕ ∈ S belongs to S only if

ϕ(x) dx = 0.

8.3. (a) Yes. (b) No (ex grows to fast as x → +∞). (c) No (not linear). 8.6. f (x) = 12H(x + 1) − 6 − 16δ(x + 1) + 8δ (x + 1). 8.10. 1/(1 + iω), 2πeω (1 − H(ω)) resp. 2πi(δ(ω) − e−ω H(ω)). 8.13. f (t) = δ(t) + H(t).

263

264 8.18.

Appendix D. Answers to selected exercises

n∈Z

δ(ω − n).

8.19. (a) E(t) = eat (H(t) − 1) if a > 0, E(t) = at

E(t) = e H(t) if a < 0.

1 2

−t

(b) E(t) = (e

2

sgn t if a = 0,

− e−2t )H(t). 5

8.20. e−x belongs to S (and thus also to M); e−|x| has a discontinuous ﬁfth derivative and belongs to none of the classes; all the others belong to M but not to S. 8.21. Not e±2x and e2x H(x), but all the others. 8.23. ψ(x)δ (x − a) = ψ (a)δ(x − a) − 2ψ (a)δ (x − a) + ψ(a)δ (x − a). 8.24. f (x) = −| sin x| + 2

n∈Z

δ(x − nπ).

8.25. nδ(x − 1/n) − nδ(x + 1/n) → −2δ (x) as n → ∞. 8.27. (a) iπ(δ(ω + a) − δ(ω − a)). (b) π(δ(ω − b) + δ(ω + b)). ! i(−1)n n! . (d) 2 cos aω. (e) −1. (c) in πδ (n) (ω) − n+1 ω

Chapter 9 9.1. Let the positive terms be a1 ≥ a2 ≥ ax ≥ · · · → 0 and the negative terms be b1 ≤ b2 ≤ b3 ≤ · · · → 0. Then an = +∞ and bn = −∞. We can agree that we always take terms from the positive bunch in order of decreasing magnitude, and negative terms in order of increasing magnitude. Then we can obtain the various behaviours in the following ways: (a) Take positive terms until their sum exceeds 4. Then take negative terms until the sum becomes less than 4. Then switch to positive terms again, etc. Since the terms tend to 0, the sequence of partial sums will oscillate around 4 with diminishing amplitudes and their limit will be 4. (b) Take negative terms until we get a sum less than −1. Then take one positive term. Then negative terms until we pass −2; one positive term; negative terms past −3; etc. (c) Take negative terms until we pass −13; then positive terms until we exceed 2003; negative terms again until we pass −13; and carry on like this till the cows come home. (d) Take positive terms until the sum exceeds 1; then negative terms until we come below −2; then positive terms to pass 3; negative to pass −4; etc. 9.3. 1.

Appendix E Literature

This list does not attempt to be complete in any way whatsoever. First we mention a few books that cover approximately the same topics as the present volume, and on a similar level. R. V. Churchill & J. W: Brown, Fourier Series and Boundary Value Problems. McGraw–Hill, New York, 1978. J. Ray Hanna & John H. Rowland, Fourier Series, Transforms, and Boundary Value Problems. Wiley, New York, 1990. P. L. Walker, The Theory of Fourier Series and Integrals. Wiley, Chichester, 1986. The following books are on a more advanced mathematical level. ¨ rner, Fourier Analysis. Cambridge University Press; ﬁrst Thomas W. Ko paperback edition, 1989. ¨ rner, Exercises for Fourier Analysis. Cambridge UniverThomas W. Ko sity Press, 1993. These books are excellent reading for the student who wants to go deeper into classical Fourier analysis and its applications. The applications treated cover a wide range: they include matters such as Monte Carlo methods, Brownian motion, linear oscillators, code theory, and the question of the age of the earth. The style is engaging, and the mathematics is 100 percent stringent.

266

Appendix E. Literature

Yitzhak Katznelson, An Introduction to Harmonic Analysis. Wiley, New York, 1968. This work goes into generalizations of Fourier analysis that have not been mentioned at all in the present text. It presupposes knowledge of Banach spaces and other parts of functional analysis. ¨ rmander, The Analysis of Linear Partial Diﬀerential Operators, Lars Ho I–IV. Springer-Verlag, Berlin–Heidelberg, 1983–85. This monumental work is the standard source for distribution theory. It is not an easy read, but it is famous for its depth, breadth, and elegance. Finally, for the really curiuos student, we mention a couple of research papers referred to in this text. Lennart Carleson, On convergence and growth of partial sums of Fourier series. Acta Mathematica 116 (1966), 135–157. Hans Lewy, An example of a smooth linear partial diﬀerential equation without solution. Annals of Mathematics (2) 66 (1957), 91–107.

Index

Abel summation, 152 almost everywhere, 116 amplitude, 76 angular frequency, 90 autocorrelation function, 102, 194 Bessel inequality, 111, 117 black box, 53, 67, 239 boundary condition, 10 boundary values, 10, 137 Carleson’s theorem, 89 CD recordning, 188 `ro summation, 20, 82, 96, Cesa 97 chain rule, 211 characteristic curve, 6 Chebyshev polynomials, 128 compact support, 200 completeness, 111, 119 complex exponential, 15 complex vector space, 105 continuity on T, 74 convergence of distributions, 213

of test functions, 201 pointwise, 86, 87, 117 uniform, 12, 24, 83, 117 various notions, 117 convolution, 53, 65, 80, 176, 218, 232, 239 d’Alembert formula, 8 delta “function”, 28, 57, 96, 199, 205 derivative of distribution, 208 diﬀerence equation, 61 diﬀusion equation, 1 dipole, 31, 226 Dirac “function”, 28, 57, 96, 199, 205 Dirichlet kernel, 81, 87, 93 problem, 145, 148 distance 115 distribution, 27, 57, 96, 190, 203 domain, 1 double series, 230 eigenvalue, 154

268

Index

eigenvector, 154 electric dipole, 31, 226 elliptic equation, 3 equality of distributions, 206 of functions, 115 Euler’s formulae, 16, 17 even function, 77 expansion theorem, 112 ´r Feje kernel, 81 theorem, 82 FFT, 243 Fibonacci numbers, 64 Fourier coeﬃcients, 75, 116 series, 75, 220 multi-dimensional, 233 transform, 165 discrete, 243 fast, 243 inversion, 171 of distributions, 213 multi-dimensional, 236 fundamental solution, 58, 221 fundamental tone, 144 fuzzy point, 199, 200 generalized derivative, 86 Gibbs phenomenon, 93 heat equation, 1, 9, 137, 139, 182, 223 Heaviside function, 29, 204 window, 29, 209 Heisenberg principle, 198 Hermite polynomials, 127, 160 homogeneous condition, 10 hyperbolic equation, 2 impulse response, 67, 69, 240 initial values, 7, 10 inner product, 106

Kahane and Katznelson, 89 Laguerre polynomials, 127, 160 Laplace equation, 2, 145, 159, 185, 223 operator, 1 transform, 28, 39, 188 inversion, 189 uniqueness, 48 Laurent series, 60 least squares approximation, 110 Lebesgue spaces, 115 Legendre polynomials, 124, 159 mean value, 79 moderately increasing function, 201 modes of vibration, 144 multiplicator, 201 norm, 107, 115 odd function, 77 ON set, 108 operator, 154 orthogonal, 108 projection, 110 orthonormal set 108 parabolic equation, 2 Parseval formula, 112, 113, 120 partial tone, 144 partition of unity, 203 phase angle, 76 Plancherel formula, 180 point charge, 27, 198 pointwise convergence, 86, 87, 117 Poisson equation, 2 kernel, 152 summation, 152 principal value, 206 projection, 110 pulse response, 67, 69, 240

Index

pulse train, 96, 220 P.V., 206 residual, 111 resonance, 5 Riemann–Lebesgue lemma, 25 Rodrigues formula, 125, 127 roof function, 24 sampling theorem, 187 separation of variables, 10, 137 series double, 230 Fourier, 75, 220 Laurent, 60 rearrangement of, 227 summability of, 21 Shannon’s sampling theorem, 187 spherical harmonics, 159 stability of diﬀerential equation, 4 of black box, 68, 69 Sturm–Liouville operator, 156 problem, 155 singular, 158 theorem 157 summability of series, 21 summation kernel, 22 support, 200, 207 symmetric operator, 154 tempered distribution, 203 function, 201 test function, 200 transfer function, 68, 69 Tricomi equation, 3 uniform continuity, 24, 168 uniform convergence, 12, 24, 83, 117 uniqueness, 4, 48, 84, 176 unit step function, 29

vector space, 105 vibrating string, 143 vibration, modes of, 144 wave equation, 2, 5, 143, 211 Weierstrass approximation theorem, 124 weight function, 115 well-posed problem, 3 zero set, 89, 116, 207, 233 Z transform, 60

269